RunningSPEC

Note: some steps can only be completed successfully by DavidG, since he owns the licenses needed for the Intel Compiler Suite and for SmartHeap. There is only one Intel license (commercial) available for doing this work, as well as only a single SmartHeap license (still on order). But, in principle, anyone at Nikhef is entitled to run the SPEC benchmark with their favourite plain old dirty gcc compiler and with conventional heap management. Access to the SPEC suites is limited to the NDPF systemAdministrator group (with the NDPF login) only to make sure that the code does not leak out, and that anyone running the benchmark does it in a compliant way.

Prepare the machine

• Install a machine with CentOS5 x86-64, e.g. via quattor or manually. Make sure it's a physical machine, and that it will be dedicated to the benchmark running for at least as long as you need it. Make sure numactl and taskset (from util-linux) are available on the machine.

Using the Intel compiler

If you want to get proper performace from the benchmark, and for vendor acceptance tests, you must use the Intel compiler:

• As root, install the Intel compiler suite (version 11.0) from [https://www.nikhef.nl/grid/ndpf/files/local/intel/]. Install both the i386 and the x86_64 varieties.
• As root, run the script [intel-Compiler-postinstall.sh] to set the installation destination into the generated scripts.
• As root, install the license file to /opt/intel/licenses/icc-davidg.lic and chown it to davidg:users, mode 0600.
• Add to your profile:

PATH=$PATH:/opt/intel/Compiler/11.0/081/bin/intel64/
export PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/intel/Compiler/11.0/081/lib/intel64
export LD_LIBRARY_PATH
LANG=C
export LANG

Using SmartHeap

To be written

Installing and running SPEC2006

• From the installation directory retrieve the SPEC2006 sources [cpu2006.tar.bz2] (you'll need your NDPF username to retrieve the file, and be a member of the systemAdministrators group: for SPEC2006 and SPEC2000 Nikhef has a site license).

• Unpack the spec2006 sources in a dedicated directory (to prevent pollution):

mkdir -p benchmarking && ( cd benchmarking ; bzcat ../cpu2006.tar.bz2 | tar xf - )

• change to the benchmark directory

cd benchmarking

• 'install' the suite by running in the benchmarking/ directory:

./install.sh

and agreeing that the source and installation directory are the same.

• copy the proper configuration file from the private repository, e.g. [cpu2006-icc11-noSH-rate-nikhef-ppfB0.cfg] for a configuration without SmartHeap but assuming some special stack settings in the notes. Put it in config/cpu2006-icc11-noSH-rate-nikhef-ppfB0.cfg

• for good measure, download the flags file for icc from [http://www.spec.org/cpu2006/flags/Intel-ic11.0-int-linux64-revE.xml] and put it in the config/ directory as well.

• set the SMP affinity in the config file to the number of available cores. This directly affect the rate measurement!

• Set the environment correctly by SOURCING the [setstack.sh] script:

export KMP_STACK_SIZE=64M
ulimit -s unlimited

• source the SPEC environment by

. shrc

• run the benchmark, making sure to redirect logging to a file for analysis:

runspec --rate 8 -c cpu2006-icc11-noSH-rate-nikhef-ppfB0.cfg --machine=stoakleydp8cores -T base -o all int > run.log 2>&1 &
disown %1

Verifying the output

The result of your SPEC run in left in numbered files in the results/ directory in the behcnmarking owrking directory. The files are called CINT2006.001.ref.*. For a successful run, please copy all of these files to our persistent storage area on the web server at login.nikhef.nl://www/grid/ndpf/files/nikhef-only/spec2006-nikhef/results/.

If ever the CINT2006.XXX.ref.txt file start with this:

##############################################################################
#   INVALID RUN -- INVALID RUN -- INVALID RUN -- INVALID RUN -- INVALID RUN  #
#                                                                            #
# Your run was marked invalid because it has one or more flags in the        #
# "unknown" category. You might be able to resolve this problem without      #
# re-running your test; see                                                  #
#      http://www.spec.org/cpu2006/Docs/runspec.html#flagsurl                #
# for more information.                                                      #
#                                                                            #
#   INVALID RUN -- INVALID RUN -- INVALID RUN -- INVALID RUN -- INVALID RUN  #
##############################################################################

you know you've messed up and you MUST NOT use the results. Please review the log file and error messages and try again.

If your result is very far form the ones published on [http://www.spec.org/cpu2006/results/], then also review your setup. Was the Intel compiler used? What SmartHeap correctly installed? Etc. Of course, if you used gcc than your performance will be down by 30-50% anyway.

Typical numbers for the different compiler scenarios are:

Condition	Performance metric
Vendor provided public value	107
GCC v3.4	63
ICC11.0, no SH	93
ICC11.0, with SH	<to be tested>