Generating Higgs To 4 Muons at NIKHEF

This page contains a description on how to generate Higgs production at the LHC, where the Higgs boson decays into 2 Z bosons that each decay into either 2 electrons or 2 muons. It is ment as a starting point. In this example we will use AtlFast so we see what the events look like in Atlas. The next steop will be the full simulation and reconstruction. We will produce a combined ntuple (CBNT) that contains the MC truth and reconstructed AtlFast objects.

Note: We assume you have the CMT and Athena set-up at NIKHEF in ordnung Starting with CMT and Athena at NIKHEF

1. producing 10 events

a) Go to your favorite area (your project for example) and create a running directory

cd /project/atlas/users/<your_login_name>

mkdir MyGeneration

b) Create your joboptions file

Each athena job requires a joboptions file as input. Here we will create a joboption file that will:

• Define what 'algorithms to run (in our case Pythia and Atlfast)
• Define the Pythia settings
• Define output parameters/ntuples

Open a file called joboptions_HiggsGeneration.py and fill it with the following code

###############################################################
#
# Job options file
#
#==============================================================

#--------------------------------------------------------------
# General Application Configuration options
#--------------------------------------------------------------
include("AthenaCommon/Atlas_Gen.UnixStandardJob.py")

theApp.setup( MONTECARLO )

include( "PartPropSvc/PartPropSvc.py" )
include( "AtlfastStandardOptions.py" )

#--------------------------------------------------------------
# Private Application Configuration options
#--------------------------------------------------------------
theApp.DLLs   += [ "TruthExamples", "Pythia_i" ]
theApp.Dlls   += [ "GaudiAlg", "GaudiAud" ]
theApp.Dlls   += [ "AtlfastAlgs" ]

# Set output level threshold (2=DEBUG, 3=INFO, 4=WARNING, 5=ERROR, 6=FATAL )
MessageSvc = Service( "MessageSvc" )
MessageSvc.OutputLevel = 3
MessageSvc.defaultLimit = 9999999 

#--------------------------------------------------------------
# Create the top level algorithm (and the Python equivalent)
#--------------------------------------------------------------
theApp.TopAlg = [ "Sequencer/TopSequencer" ]
TopSequencer  = Algorithm( "TopSequencer" )
TopSequencer.StopOverride = TRUE

# Create two paths and populate them
TopSequencer.Members  = [ "Sequencer/Generator", "Sequencer/Atlfast" ]

Generator = Algorithm( "Generator" )
Generator.Members = [ "Pythia", ]

#--------------------------------------------------------------
# Event related parameters
#--------------------------------------------------------------
# Number of events to be processed (default is 10)
theApp.EvtMax = 10
#theApp.EvtMax = XNEVENTSX

#--------------------------------------------------------------
# Random numbers
#--------------------------------------------------------------
AtRndmGenSvc = Service( "AtRndmGenSvc" )
AtRndmGenSvc.Seeds = ["PYTHIA 5769791 690419913", "PYTHIA_INIT 690501 4106941"];
#AtRndmGenSvc.Seeds = ["PYTHIA XRNDPYTHIA0X XRNDPYTHIA1X", "PYTHIA_INIT XRNDPYTHIA2X XRNDPYTHIA3X"]

#--------------------------------------------------------------
# Algorithms Private Options (Pythia)
#--------------------------------------------------------------
Pythia = Algorithm( "Pythia" )

#-- Stolen from DC1 production (simple test)
Pythia.PythiaCommand = [
           # Higgs production
                         "pysubs msel 16",	   # Higgs production
	                 "pydat2 pmas 25 1 150.",  # Higgs mass                         

           # Higgs decay
        	         "pydat3 mdme 210 1 0",  # H -> dd
	                 "pydat3 mdme 211 1 0",  # H -> uu
                         "pydat3 mdme 212 1 0",  # H -> ss
                         "pydat3 mdme 213 1 0",  # H -> cc
                         "pydat3 mdme 214 1 0",  # H -> bb
                         "pydat3 mdme 215 1 0",  # H -> tt
                         "pydat3 mdme 218 1 0",  # H -> e+e-
                         "pydat3 mdme 219 1 0",  # H -> mu+mu-
                         "pydat3 mdme 220 1 0",  # H -> tau+tau-
                         "pydat3 mdme 222 1 0",  # H -> gluon gluon
                         "pydat3 mdme 223 1 0",  # H -> gamma gamma
                         "pydat3 mdme 224 1 0",  # H -> gluon + gamma
                         "pydat3 mdme 225 1 1",  # H -> ZZ              (ON)    
                         "pydat3 mdme 226 1 0",  # H -> WW
           # Z decay
                         "pydat3 mdme 174 1 0",  # Z -> dd
                         "pydat3 mdme 175 1 0",  # Z -> uu
                         "pydat3 mdme 176 1 0",  # Z -> ss
                         "pydat3 mdme 177 1 0",  # Z -> cc
                         "pydat3 mdme 178 1 0",  # Z -> bb
                         "pydat3 mdme 179 1 0",  # Z -> tt
                         "pydat3 mdme 182 1 1",  # Z -> e+e-           (ON)
                         "pydat3 mdme 183 1 0",  # Z -> nu_e nu_e 
                         "pydat3 mdme 184 1 1",  # Z -> mu+mu-         (ON)
                         "pydat3 mdme 185 1 0",  # Z -> nu_mu nu_mu 
                         "pydat3 mdme 186 1 0",  # Z -> tau+tau-
                         "pydat3 mdme 187 1 0"   # Z -> nu_tau nu_tau  
                         ]

#--------------------------------------------------------------
# What do you want in the CBNT 
#--------------------------------------------------------------
include( "CBNT_Athena/CBNT_Athena_jobOptions.py" )
include( "CBNT_Athena/CBNT_EventInfo_jobOptions.py" )
include( "RecExCommon/CBNT_Truth_jobOptions.py" )
CBNT_Truth.MaxNbParticles = 6000               # maximum number of particles in the ntuple
CBNT_Truth.MaxNbVertices  = 6000               # maximum number of vertices in the ntuple
CBNT_Athena.NtupleLocID = "/FILE1/CBNT/t3333"  # name of the Tree
All.Enable = True                              # save ALL particles

#--------------------------------------------------------------
# (Root) output service 
#--------------------------------------------------------------
# ROOT Output Parameters
theApp.Dlls += [ "RootHistCnv" ]
# Select ROOT persistency
theApp.HistogramPersistency = "ROOT"

#--------------------------------------------------------------
# Output file for the Ntuple
#--------------------------------------------------------------
NTupleSvc = Service( "NTupleSvc" )
NTupleSvc.Output     = [ "FILE1 DATAFILE='./HiggsNtuple.root' OPT='NEW'" ]
#NTupleSvc.Output     = [ "FILE1 DATAFILE='./XOutputDirCBNTX/HiggsNtuple.JobXJOBNUMBERX.root' OPT='NEW'" ]

#==============================================================
#
# End of job options file
#
###############################################################

b) Get additional steering files

There are some requires input files that you have to get. The way to obbtain them is using the command get_files.

get_files PDGTABLE.MeV

get_files PartPropSvc.py

get_files AtlfastStandardOptions.py

c) Run Athena

Running Athena is now a single line: athena.py joboptions_HiggsGeneration.py

You can ask athena to print out al commands it is processing:

Full output of what athena is doing: athena.py -bs joboptions_HiggsGeneration.py

d) Check the output

In the directory now an output file called HiggsNtuple.root has been produced. When you look in the file you'll find the Tree for the CBNT (MC Truth) and that for AtlFast (Event in ATLAS). Now you only have to write a ROOT macro to read the file and do your analysis.

Finished!

2. producing 10,000 events in 10 sets of 1000

When using the joboptions file in the example above you have produced 10 events, but when you want to have a bit large production you want to automatise everything a bit:

Create a new joboption file for each job each having

• A unique random number seed for Pythia
• A user defined number of events
• An output ntuple that is different for each event
• Store output and Logfiles in a separate directory

To do just this a small script has been created.

a) Create a BASICS-directory

Create a directory with the basic information you require.

  
 cd /project/atlas/users/<your_login_name>/MyGeneration/
 mkdir HiggsGen_BASICS
 cp PDGTABLE.MeV               ./HiggsGen_BASICS/
 cp PartPropSvc.py             ./HiggsGen_BASICS/
 cp AtlfastStandardOptions.py  ./HiggsGen_BASICS/
 

We also copy the joboptions file there and rename it

   
  cp joboptions_HiggsGeneration.py ./HiggsGen_BASICS/joboptions_HiggsGeneration.py.BASIC
  

b) Edit the standard joboptions file

To allow the script to change the job-dependent settings in the joboptions file we'll now have to change 3 lines in the joboptions file.

1) Change Number of events

theApp.EvtMax = 10 . changes to ->

theApp.EvtMax = XNEVENTSX

2) Change Random number seeds for Pythia

AtRndmGenSvc.Seeds = ["PYTHIA 5769791 690419913", "PYTHIA_INIT 690501 4106941"]. changes to ->

AtRndmGenSvc.Seeds = ["PYTHIA XRNDPYTHIA0X XRNDPYTHIA1X", "PYTHIA_INIT XRNDPYTHIA2X XRNDPYTHIA3X"]

3) Change Name output file (and output directory)

NTupleSvc.Output = [ "FILE1 DATAFILE='./HiggsNtuple.root' OPT='NEW'" ]. changes to ->

NTupleSvc.Output = [ "FILE1 DATAFILE='./XOutputDirCBNTX/HiggsNtuple.JobXJOBNUMBERX.root' OPT='NEW'"]

c) Create an output directory (Ntuples and Logfiles)

 To store the ntuples and Logfiles we create an output directory
  
 cd /project/atlas/users/<your_login_name>/MyGeneration/
 mkdir HiggsGen_OUTPUT
 mkdir HiggsGen_OUTPUT/InputAndLogfiles
 

d) Get the script and tailor it to your needs

First copy the main script to your running directory

  
 cd /project/atlas/users/<your_login_name>/MyGeneration/
 cp /user/ivov/Higgs_Tutorial_Files/ShipOff_HiggsGen.py .
 

The main user control flags that need to be edited are listed at the bottom of the script where you see: User control flags

output_dir          = "/project/atlas/users/<your_login_name>/MyGeneration/HiggsGen_OUTPUT/"
steering_files_dir  = "/project/atlas/users/<your_login_name>/MyGeneration/HiggsGen_BASICS/"
Nevents_joboptions  =      20  # Number of events per job
Njobs               =       2  # Number of jobs
f_LogFile           =       0  # Logfile yes/no

By default what will happen is that for job 1, a directory called Job1 is produced that contains the files from HiggsGen_OUTPUT/ and a unique joboptions file (20 events with a unique random number sequence for Pythia). In the directory a link is put to the HiggsGen_BASICS/ directory. After the job is finished the Ntuple called HiggsNtuple.Job1.root is put in that directory. For job number 2 a similar thing happened.

e) The real thing

Now, once this is running, you might want to change 2 more things.

First, you should opt for the automatic logfile:

f_LogFile           =       1  # Logfile yes/no

Then you should remove the # from the line

#CleanUp_Job(i_file)

This will make that at the end of the job both the logfile and the joboptions file for this job will be copied to the directory "HiggsGen_OUTPUT/InputAndLogfiles" and that the directory is removed.

Finally, chaning the Number of events to 1000 and the number of jobs to 10, you will produce 10,000 events with H->ZZ->