NikhefVeloTasks

Vacuum (twiki, EDMS)

• answer questions of and perform discussions with the CERN vacuum group about the new vacuum control system (Rodrigo Ferreira, Giuseppe Bregliozzi, Paulo Gomes, Henrik Vestergard)
• maintain SmsVacTool script and start it in Neon periods (running on vedcs02)
• check APDP in Neon periods (velo_user_panel)
• change status to ready for beam to ECS after interventions by the CERN vacuum group (watch for date in run meeting; be available for monitoring while Didier takes the actions; make sure to go through 'evacuate' after Didier is ready)

Motion (twiki, EDMS

• perform potmeter calibration: WinCC-panel, data-analysis, upload results to motion-PLC (once a year! see manual)
• discussions with CERN PH-DT group on the new motion control system (Giovanna Lehmann, Xavier Pons and Sylvain Ravat; link to meeting)
• put detectors in place before/after Neon periods (see e.g. elog before, elog after)

Cooling (twiki, EDMS)

• be able to put CO2-pumps under gas for pump maintenance (see EDMS manuals, one for each pump)
• theory and practice: sub-cooling on input of pump, control PLC-screen, make and interprete trend plots, superheated CO2 (?), preheaters, SMS tool
• special plots for TL-pump (monitor TL_Diffp_plus in trending tree of velo_user_panel)
• check long-term behaviour of system (best: sensor NTC temperatures; simplest: coockie temperatures) , e.g. to reduce risks of thermal runaway (if cooling becomes worse we probably loose pressure due to clogged filters; watch pt104 and pt003 in vecool)
• maintain alarm levels in the alert system (PLC?)
• be standby 365, 24/5 to react when system switches to backup, or if anything else goes wrong
• maintain telephone numbers in PLC sms tool
• lend assistance to Seicar for chiller maintaince (phone, e-mail?)
• put system in correct state before/after Neon (setpoints, interlock, see elog)
• keep track of TinyTags data and dry air flow
• order spare parts and coordinate maintenance and repair (how?)

Common vacuuum/motion/cooling

• check UPS systems and maintain spares (?)
• maintain email lists of UPS systems (?)
• check VMC system after yearly AUG and diesel tests (?)
• update interlock settings before/after Neon period (see elog)
• take care of storage in Bld 169
• maintain manuals pages in VELO-twiki and EDMS documents
• participate in VELO run meeting on Tuesday morning

Velo upgrade

• co-coordination of WP5: keep track of anything that relates to modules such as sensors, readout, data tapes, markers, LV- and HV-cables, components (substrates, hybrids, ...)
• participate in module-0 meeting on Tuesday
• take care of wafer and glass parts in clean room storage at Nikhef