VL-e Resource Guide

From PDP/Grid Wiki
Jump to navigationJump to search

This document focuses on listing the grid resources that are available for VL-e project members. It does not explain how to use these resources; for that, you should consult the Grid Tutorial documentation. It is recommended that new users come to the Grid Tuturial, which is held every year.

The grid resources for VL-e are provided jointly by Nikhef and Sara, who participate in a larger framework for grid computing worldwide, in particular for the high energy physics experiments of the LHC. The grid middleware is provided by the European EGEE project. As a national project, VL-e has to share the resources with other applications.

Nikhef and Sara play a somewhat different role: Nikhef focuses mainly on computational clusters, while Sara has a tape storage facility for long-term data storage.


Computing

The clusters are accessible through the gLite stack of software developed by the EGEE project, based largely on Globus. You can use the command-line tools, as explained in the Grid Tutorial. If you require the VL-e Proof of Concept software distribution, you should add a requirement to your JDL file that says:

Requirements = Member("nl.vl-e.poc-release-2", other.GlueHostApplicationSoftwareRunTimeEnvironment);


The following list shows the compute elements that are available to VL-e VOs. This information can be retrieved with

lcg-infosites --vo pvier ce

and will vary according to per-VO configurations at the sites. The information system can be publicly queried by standard ldap tools, such as ldapsearch:

ldapsearch -x -H ldap://bdii03.nikhef.nl:2170/ -b 'mds-vo-name=NIKHEF-ELPROD,mds-vo-name=local,o=grid'  

An excellent ldap browser (written in Java) is found here[1]. To browse the information system, connect to bdii03.nikhef.nl on port 2170 and enter 'o=grid' as the base dn.

List of available queues
Resource name maximum wall time comments
tbn20.nikhef.nl:2119/jobmanager-pbs-qlong 30 hours The Nikhef cluster has 1156 CPU cores
tbn20.nikhef.nl:2119/jobmanager-pbs-qshort 5 hours
ce.gina.sara.nl:2119/jobmanager-pbs-short 4 hours GINA (Grid In Almere) has 160 CPU cores
ce.gina.sara.nl:2119/jobmanager-pbs-medium 33 hours


Your VO affiliation greatly affects your ability to run jobs. While the dutch sites support the VL-e VOs, they also support many other VOs on the same infrastructure. This leads to competition for cycles. The mechanism to address this issue is to allow a fair share of the cycles to be used by a VO, and to give higher priority to VOs who have used little of their fair share in the last period.

Scheduling on the cluster is straightforward, but from a user perspective it is less straightforward to predict how quickly your job will run. The parameter that is of most interest is the estimated response time, which expresses the expected time it will take for a job that is submitted right now to start running on a cluster. See for instance this graph.

Running tests and debugging

If your grid jobs are not behaving as expected, debugging can be a really frustrating ordeal. You have no way to inspect a running job up close, and the turnaround for each modification to your job is high.

To shorten the turnaround, you may request (from mailto:grid.support@sara.nl) the privilege to use the express queues on the GINA an Matrix clusters. The restriction is that jobs may last no longer than a couple of minutes.

If this is still not enough, and an application requires serious testing and debugging, you may request the use of the VL-e P4 Certification Test Bed. Contact mailto:vle-pfour-team@lists.vl-e.nl for support.

Storage

Grid Storage Elements can be discovered with the command

lcg-infosites --vo pvier se

(where you should replace pvier by the name of your own VO).

storage elements reported on August 22, 2007 for pvier
Avail Space(Kb) Used Space(Kb) SEs Remarks
482906560 1587920944 tbn15.nikhef.nl classic SE; don't use this old one.
1710000000 137730 tbn18.nikhef.nl Modern DPM system with SRM interface; use this one.
317044396 539916244 mu2.matrix.sara.nl DCache system with SRM interface

Note that the numbers may be different for other VOs, and there may actually be fewer SEs showing up. If you need more disk quota, please contact grid support (mailto:grid.support@nikhef.nl or mailto:grid.support@sara.nl).

LFC

The Logical File Catalog (LFC) is a way to have easy to remember aliases for grid storage files. Think symbolic links. To use the lfc-* tools, set

LFC_HOST=lfc.grid.sara.nl
export LFC_HOST

and of course you need a valid proxy. Now you can do, e.g.

lfc-ls /grid/vlemed/

SRB

Besides these SRM enabled systems, there is a SRB system provided by Sara. Unfortunately it cannot be used with the standard grid tools for logical file names, replicas, etc.; however, there is a gridftp front end. You need to obtain an SRB account by contacting mailto:grid.support@sara.nl (see the quickstart guide).

To use Srb, create a directory called .srb in your home directory and create a dummy file .MdasAuth (contents are irrelevant) and a file .MdasEnv:

mdasCollectionName '/VLENL/home/your.name.vlenl'
mdasCollectionHome '/VLENL/home/your.name.vlenl'
mdasDomainName 'vlenl'
mdasDomainHome 'vlenl'
srbUser 'your.name'
srbHost 'srb.grid.sara.nl'
srbPort '50000'
defaultResource 'vleGridStore'
AUTH_SCHEME 'GSI_AUTH'
SERVER_DN '/O=dutchgrid/O=hosts/OU=sara.nl/CN=srb.grid.sara.nl'

Replace your.name with your SRB account name.

The web-interface to SRB can be reached here [2].

There is a grid-ftp frontend to SRB on the same server on port 50097. This can be accessed (for example) with uberftp :

(create proxy as usual)
uberftp -P 50097 srb.grid.sara.nl

Tape storage

There is no default storage to tape. If you need tape storage, you have to explicitly request it. Sara can provide tape storage with various regimes, such as automatic disk-to-tape migration. Contact mailto:grid.support@sara.nl for more information.

about data replication

The Grid Tutorial explains how you can replicate your data to multiple storage elements, so that when you submit a job that needs this data, the resource broker may find a compute element 'close' to one of your copies. The current situation for VL-e members is such that all clusters on which a job may land are within the Netherlands. Thus, there is no gain in having more than one replica of your data around to improve the transfer efficiency.

Grid Access

Accessing the Grid means using grid tool; installing these tools can be tricky. Currently, there are a number of choices:

Monitoring

There are various ways to get information about the current state of the Grid and your grid jobs.

If you want to be informed of updates, downtimes, etc. you can subscribe to the infrastructure-announce mailing list.

Sara uses Ganglia:

Nikhef shows some useful statistics:

External monitoring tools

VO specific monitoring

Documentation

Links