How to manage and configure the Suiker Bieten

First some specs about the cluster:

4 x Dell R710
- 2 x Intel X5667 quadcore
- 96GB DDR3 ram
- 2 x 600GB 15K RPM SAS disks in hardware raid 1
- Intel dual 10Ge X520-DA2 network card
- iDRAC6 enterprise management card
- 2 x SAS 6Gbps External Controller
- Onboard 1Ge network cards are disabled in the BIOS
4 x Dell MD3200
- 2 raid controllers
- 12 x 2TB NearLine SAS 6Gbps 7.2k 3.5" harddrives
- 4 x Dell MD1200
  - 12 x 2TB NearLine SAS 6Gbps 7.2k 3.5" harddrives

There is also one machine for the management of the storage systems:

This machine is connected with a Dell PowerConnect 3524 switch to the Dell MD3200 storage controllers.

Hostnames of the management machine:

biet-mngt.ipmi.nikhef.nl is to reach the machine itself.
biet-mngt-oobm.ipmi.nikhef.nl to reach the ipmi/drac/oobm interface of the machine.

To access and configure the storage

Log onto the biet-mngt machine as root. Make sure that X forwarding is configured and working.

Start the following command: /opt/dell/mdstoragesoftware/mdstoragemanager/client/SMclient

This will start the Dell storage management software.

If you'll want to reconfigure one of the storage blocks from scratch, do the following:

Start the Dell storage management software.
Click once on the storage device you want to reconfigure.
Click on Tools > Load Storage Array Configuration
You'll get a pop-up that you're sure that you want to do that, click on Yes
You'll get a screen where you can see a couple of *.cfg files, choose the one that has the same name as the storage device.
Click on Execute and wait when the script has finished configuring the storage device.
The storage device is now back in the state that we normally use for production. (It can take 24 hours before the storage is done with configuring all the drives and the raid-sets)