Software development on Arista hardware
Development platform
My development platform is an Arista 7148S switch and compatible devices. The firmware version used is EOS 4.7 which based on Fedora Core 12 (with some small exceptions).
Project: arp-2-bgp
https://github.com/okoeroo/arp-2-bgp
Helper tools
https://github.com/okoeroo/arista-EOS-rc
External links
Managing Extensions
http://arisq.ylb.jp/documents/extensions
Document website .jp
Unstructured notes
The flash disk is a FAT32 disk of 2GB and by default mounted on /mnt/flash
The /mnt/flash/persistent/ directory contains the system disk images.
The file /mnt/flash/rc.eos is executed at the end of the boot (switch reload) time. It has the file /etc/swi-version sourced, exposing the EOS version.
The switch CLI is executed by the python script:
/usr/bin/Cli
If you run this shell from the admin user on the switch, then this will not succeed for all switch-CLI commands. Perform a privilege upgrade on the bash shell with "su" or let a cron job run with root privileges.
Switch CLI commands of interest
show ip arp
This exposes the IP addresses of the connected hosts and on with Vlan they reside.
show run | include network
Show active run information, and filter on the announced networks.
ena conf t
Go into configuration mode
ip route 192.168.10.1/24 vlan 66
Add a static route to 192.168.10.1/24 on Vlan 66
