Hooikar/hooiwagen

This article describes the setup of the DPM disk servers hooikar and hooiwagen. These disk servers export file systems which are mounted via iSCSI from the Sun X4500 hosts (hooi-ei-*).

Motivation

The Sun X4500 hosts were installed with operating system CentOS-4 x86-64 and the gLite 3.1 version of DPM. gLite decided to drop support for the gLite 3.1 version of DPM in the course of 2011. Existing installations had to be upgraded to the gLite 3.2 version of DPM under EL5.

Unfortunately, the Sun X4500 series are only certified for use with RHEL4. The combination with RHEL5 is explicitly not supported by the vendor.

Although aware of this support issue, we installed CentOS-5 x86-64 on a test machine and started testing. The results were disappointing. When used under modest load (using rsync to copy from another host, a single-threaded operation), the test machine would halt with a kernel panic in ~6 hours. Leaving the test machine without any load would lead to a kernel panic in a week or so.

These findings and the lack of support by the vendor made us search for another way to use the ~280 TB of disk space using the gLite 3.2 version of DPM.

iSCSI-based setup

The new setup uses a CentOS-4 x86-64 installation of the Sun X4500 hosts as iscsi-target hosts. Each of these hosts exports 20 TB disk space as a single block device via iSCSI.

Two new hosts come into play: hooikar and hooiwagen. They are Dell R610 hosts with dual Myricom 10 Gbps network cards. These hosts are installed with CentOS-5 x86-64 and the gLite 3.2 version of the DPM disk server middleware. They are configured as iSCSI clients and connected via a private network to the the Sun X4500 hosts.