@@ Line 244: / Line 244: @@
 === Regression tests ===
-Savannah bug [https://savannah.cern.ch/bugs/?53192 53192]: '''scas-client: segfaults with malformed lcmaps-glexec.db''' (implemented):
+==== Savannah: https://savannah.cern.ch/bugs/?64057 ====
+DESCRIPTION: glexec fails with a misleading error message if the configuration cannot be read
-The SCAS-client plugin will not trigger a segmentation fault and pull gLExec with it when the SCAS host is not a FQDN.
+REPRODUCE: install glexec in setuid mode
+ -r-sr-sr-s  root.glexec  /usr/sbin/glexec
+and the config file as
+ -r--r-----  root.root    /etc/glexec.conf
+CHECK: Error message
+FAILED: Get
+ [gLExec]:   The user, uid=502(tester), is not whitelisted. The calling user account is not privileged to execute and use gLExec.
+PASSED:
+ [gLExec]:  User tester (uid=502) is not whitelisted, i.e. may not invoke gLExec.
+           If this is unexpected, ask the sysadmin to check the syslog and the
+           permissions of the config file.
+==== Savannah: https://savannah.cern.ch/bugs/?77767 ====
+DESCRIPTION: yaim-glexec-wn must put GLEXEC_LOCATION in grid-env.sh
+REPRODUCE: install YAIM, run yaim-glexec-wn
+CHECK: content of grid-env.sh
+FAILED: No GLEXEC_LOCATION exported in the shell
+PASSED: GLEXEC_LOCATION available and set
+==== Savannah: https://savannah.cern.ch/bugs/?82714 ====
+DESCRIPTION: YAIM should not configure LCAS when Argus is used
+REPRODUCE:
+* install and configure yaim-glexec-wn
+* configure site-info.def to use ARGUS: set in <tt>siteinfo/services/glite-glexec_wn</tt>
+ GLEXEC_WN_ARGUS_ENABLED=yes
+* run YAIM
+CHECK: contents of <tt>/etc/glexec.conf</tt>
+FAILED: configuration file contains <tt>use_lcas = yes</tt>
+PASSED: configuration file must contain <tt>use_lcas = no</tt> (default is to use LCAS).
+==== Savannah: https://savannah.cern.ch/bugs/?86453 ====
+DESCRIPTION: Permissions on glexec in RPM are not setuid root
+REPRODUCE: rpm -qvl glexec
+CHECK: permission of /usr/sbin/glexec
+FAILED:
+ ---x--x--x	1 root	root       	147456 Apr  3 02:59 /usr/sbin/glexec
+PASSED:
+ ---s--x--x	1 root	root       	147456 Apr  3 02:59 /usr/sbin/glexec
+==== Savannah: https://savannah.cern.ch/bugs/?88318 ====
+DESCRIPTION: LCMAPS excessive logging (2)
+REPRODUCE: Normal installation with LCMAPS =<1.4.x, log with gLExec to Syslog, configure to log LOG_INFO
+CHECK: Amount of log lines
+FAILED: More then O(10) log lines
+PASSED: Less then O(10) log lines, provided that you didn�t configure all kinds of plug-ins that each failed to signify a false-positive
+==== Savannah: https://savannah.cern.ch/bugs/?89773 ====
+REFERENCES:
+ https://rt.egi.eu/rt/Ticket/Display.html?id=1474
+ https://rt.egi.eu/rt/Ticket/Display.html?id=1475
+ https://rt.egi.eu/rt/Ticket/Display.html?id=1476
+ https://rt.egi.eu/rt/Ticket/Display.html?id=1641
+ Mirror bug for gLExec
+==== Savannah: https://savannah.cern.ch/bugs/?89792 ====
+DESCRIPTION: YAIM-gLExec-wn should let gLExec do the userswitch
+REPRODUCE: Run YAIM to observe the configuration in the glexec.conf and lcmaps.db
+CHECK: Check if the posix_enf plugin is NOT configured in the lcmaps.db and that the glexec.conf has the configuration: user_identity_switch_by = {glexec,lcmaps} to use �glexec� as the �switch by� setting or has no setting at all (default is switch by glexec).
+FAILED: If the configuration in the glexec.conf or lcmaps.db does not reflect a working �user_identity_switch_by = glexec� configuration
+PASSED: On successful switch by glexec
+==== Savannah: https://savannah.cern.ch/bugs/?91835 ====
+REFERENCES:
+ https://savannah.cern.ch/bugs/index.php?72377
+ https://savannah.cern.ch/bugs/index.php?72378
+ https://rt.egi.eu/rt/Ticket/Display.html?id=465
+ https://rt.egi.eu/rt/Ticket/Display.html?id=466
+ Mirror bug for gLExec
+==== Savannah: https://savannah.cern.ch/bugs/?91836 ====
+DESCRIPTION: Signal handling in gLExec 0.9.0 can hang up gLExec
+REPRODUCE: run glexec and flood it with signals after a very small delay, such that it traps signals e.g. during a syslog call. E.g. run several times:
+<pre>
+#!/bin/bash
+export GLEXEC_CLIENT_CERT=/tmp/x509up_u`id -u`
+export X509_USER_PROXY=/tmp/x509up_u`id -u`
+/usr/sbin/glexec /usr/bin/id -a &
+pid=$!
+ps -fp $pid
+for ((i=1; i<100; i++));do
+       s=$((i%64+1))
+       ((s==9 || s==19 || s==32 || s==33)) && s=11
+       kill -$s $pid
+done
+</pre>
+CHECK: gLExec does not hang up, even after many times.
+FAIL: gLExec locks up and can only be killed with a kill -9, an strace will show gLExec hangs in a lock.
+PASSED: gLExec will get interrupted or killed in a clean way.
+==== Savannah: https://savannah.cern.ch/bugs/?91963 ====
+DESCRIPTION: gLExec should check whether stdin/stdout/stderr exists
+REPRODUCE: run in non-setuid mode:
+ /usr/sbin/glexec /bin/sleep 60 1>&- 2>&- 0<&-
+CHECK: run:
+ ls -l /proc/`ps -o pid= -C glexec`/fd/[012]
+FAILED: e.g. filedescriptor 2 is missing, and filedescriptors 0 and 1 point to a socket (from syslog)
+PASSED: filedescriptors 0-2 point to /dev/null
+==== Savannah: https://savannah.cern.ch/bugs/?92667 ====
+DESCRIPTION: gLExec 0.9.3 segfaults when preserve_env_variables is used in config
+REMARKS: Bug is cross-platform, but segfault occurs on SL6
+REPRODUCE: install glexec-0.9.3 on RH6 system and add preserve_env_variables = anything to the /etc/glexec.conf, then run /usr/sbin/glexec /usr/bin/id
+CHECK: with preserve_env_variables there should be no problem in running glexec
+FAILED:
+ [gLExec]:  Premature exit due to signal, signal: 11
+PASSED: no error message, normal execution.
+==== Savannah: https://savannah.cern.ch/bugs/?92812 ====
+DESCRIPTION: LCMAPS without GSI SIGABORTs in StoRM EMI 2 RC3
+REPRODUCE: install lcmaps version 1.5.2 (EMI RC 3)
+CHECK: run llrun using the without GSI interface.
+PASSED: On successful llrun
+FAILED: On segmentation fault or abort based on an invalid free.
+REMARKS: The 1.5.3 version and newer of LCMAPS fixes the problem observed here
+==== Savannah: https://savannah.cern.ch/bugs/?92818 ====
+DESCRIPTION: glite_wms_wmproxy_server crashes with a SEGV when using the LCMAPS 1.5.2
+REPRODUCE: install lcmaps version 1.5.2 (EMI RC 3)
+CHECK: run llrun using the without GSI interface.
+PASSED: On successful llrun
+FAILED: On segmentation fault or abort based on an invalid free.
+REMARKS: The 1.5.3 version and newer of LCMAPS fixes the problem observed here
+REMARKS: Similar to Savannah bug 92812
+==== Savannah: https://savannah.cern.ch/bugs/?93187 ====
+DESCRIPTION: glexec-configure script contains some errors
+REPRODUCE: run
+ /usr/sbin/glexec-configure -o /tmp/glexec.conf -d /tmp/lcmaps.db argus argus.testbed
+CHECK: the contents of /tmp/glexec.conf and /tmp/lcmaps.db
+FAIL: e.g. endpoint line in pepc entry is missing a " at the end of the line
+PASS: glexec-configure produces valid, working glexec.conf and lcmaps.db files
+==== Savannah: https://savannah.cern.ch/bugs/?93190 ====
+DESCRIPTION: LCMAPS gives misleading error when PDL parsing fails
+REPRODUCE: Remove an �-character from the lcmaps.db file
+CHECK: Error message from LCMAPS
+PASSED: Error message flags it as a parse error
+FAILED: Error message flags it as an out of memory error
+==== Savannah: https://savannah.cern.ch/bugs/?93248 ====
+DESCRIPTION: gLExec in non-linger mode does not set umask() correctly.
+REPRODUCE: Install glexec version 0.9.5 and disable linger mode (linger=no)
+CHECK:
+ umask 0123; /tmp/dummy/usr/sbin/glexec /bin/bash -c umask
+PASSED: output should be 0123
+FAILED: output is 0077 (internal umask setting for glexec)
+==== Savannah: https://savannah.cern.ch/bugs/?101238 ====
+DESCRIPTION: mkgltempdir -t option does not work
+REPRODUCE:
+    export X509_USER_PROXY=<location of valid proxy>
+    export GLEXEC_CLIENT_CERT=$X509_USER_PROXY
+    gldir=`/usr/sbin/mkgltempdir -t 404` && ls -ld $gldir && /usr/sbin/mkgltempdir -r $gldir
+PASSED: lists directory with permissions dr-----r--
+FAILED: gives error messages starting with /bin/chmod: cannot access `<directory name>': Permission denied

Difference between revisions of "EMI gLExec release test plan and report"

Latest revision as of 09:17, 19 April 2013

Navigation menu

Search