Difference between revisions of "Proxy file handling in gLExec"

From PDP/Grid Wiki
Jump to navigationJump to search
 
(47 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
The environment variables of interest are:
 
The environment variables of interest are:
 
* GLEXEC_CLIENT_CERT
 
* GLEXEC_CLIENT_CERT
 +
* X509_USER_PROXY
 
* GLEXEC_SOURCE_PROXY
 
* GLEXEC_SOURCE_PROXY
 
* GLEXEC_TARGET_PROXY
 
* GLEXEC_TARGET_PROXY
−
* X509_USER_PROXY
+
 
 +
'''''Note''''': do ''NOT'' forget to '''export'''/'''setenv''' these variables, so that they are known to gLExec.
  
 
== GLEXEC_CLIENT_CERT ==
 
== GLEXEC_CLIENT_CERT ==
  
−
gLExec needs a (proxy) certificate as input to know who to authorize and to which account you must be mapped. The mapping and authorization decision will be based primarily on this file.
+
gLExec uses this (proxy) certificate as input to know who to authorize and to which account a mapping must be done.
 +
 
 +
In a Multi User Pilot Job (MUPJ) environment this is a proxy with the identity of the payload user.
  
 
The GLEXEC_CLIENT_CERT
 
The GLEXEC_CLIENT_CERT
−
* Contains a file path from the root to the file. Note: "/dir/subdir/../subdir2/proxy" is allowed.
+
* Contains an absolute file path to the proxyfile. Note: "/dir/subdir/../subdir2/proxy" is allowed.
−
* Must contain a public and private key pair in this one file.
+
* The proxyfile MUST contain a public and private key pair.
−
* Must be readable by the user account calling gLExec
+
* The proxyfile MUST be readable by the user account calling gLExec.
−
* Variable must be accessible by gLExec to read.
+
 
−
** Typically that means to '''export''' it into the current shell.
+
=== File permissions ===
−
* Must be set before calling gLExec.
+
 
 +
The file permissions of the file must meet the following:
 +
* The proxyfile MUST be owned by the account that calls gLExec. In pilot job framework use cases: owned by the pilot user
 +
* The proxyfile MUST NOT exceed the file permissions of 0700 which means readable, writeable or executable explicitly for the user of the file. Groups, others and special bits are not allowed.
  
−
=== Troubleshooting hints ===
+
=== Troubleshooting hints for version < 0.6.9 ===
  
 
When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with gLExec's input, in particular the absence of a usable GLEXEC_CLIENT_CERT:
 
When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with gLExec's input, in particular the absence of a usable GLEXEC_CLIENT_CERT:
Line 31: Line 38:
 
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
 
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
  
−
== X509_USER_PROXY (as input) ==
+
== X509_USER_PROXY (on the calling side) ==
 +
 
 +
The X509_USER_PROXY passes through gLExec to the SCAS client or Argus client LCMAPS plug-ins.
  
−
The X509_USER_PROXY passes through gLExec to the SCAS client or Argus client LCMAPS plug-ins. In a Multi User Pilot Job (MUPJ) environment this proxy is owned by the Pilot Job Framework '''Production Manager''' a.k.a. the Pilot User..
+
In a Multi User Pilot Job (MUPJ) environment this is a proxy with the identity of the Pilot Job Framework '''Production Manager''' a.k.a. the Pilot User.
  
−
For the interaction with an site central authorization service these credentials are used to contact the service. The credentials will be used in the policy decision at the service, but for the SCAS interaction this identity (by its VOMS credentials for instance) must be whitelisted to be able to interact with the service. The X509_USER_PROXY is used to setup the mutually authenticated secure channel to the authorization service.
+
For the interaction with a site central authorization service, such as SCAS, Argus or GUMS, these credentials are used to authenticate at the service. The actual mapping decision is based on the identity of the GLEXEC_CLIENT_CERT proxy.  The credentials will be used in the policy decision at the service, but for the SCAS interaction this identity (by its VOMS credentials for instance) must be whitelisted to be able to interact with the service. The X509_USER_PROXY is used to setup the mutually authenticated secure channel to the authorization service.
  
 
The X509_USER_PROXY
 
The X509_USER_PROXY
−
* Contains a file path from the root to the file. Note: "/dir/subdir/../subdir2/proxy" is allowed.
+
* Contains an absolute file path to the proxyfile. Note: "/dir/subdir/../subdir2/proxy" is allowed.
−
* Must contain a public and private key pair in this one file.
+
* The proxyfile MUST contain a public and private key pair.
−
* Must be readable by the user account calling gLExec
+
* The proxyfile MUST be readable by the user account calling gLExec
−
* Variable must be accessible by gLExec to read.
 
−
** Typically that means to '''export''' it into the current shell.
 
−
* Must be set before calling gLExec.
 
  
 
=== Troubleshooting hints: using Argus ===
 
=== Troubleshooting hints: using Argus ===
  
−
When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with LCMAPS plug-in's input, in particular the absence of a usable X509_USER_PROXY:
+
When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with LCMAPS plug-in's input, in particular the absence of a usable X509_USER_PROXY.
 +
 
 +
For LCMAPS c-pep plugin version < 1.0.0 this will incorrectly lead to a gLExec exit code of 202 (misconfigured site error), instead of the correct 203 (authorization failed) exit code. This leads to the following error in the log file:
  
 
  lcmaps.mod-startPluginManager(): error initializing plugin: /opt/glite/lib64/modules/lcmaps_c_pep.mod  
 
  lcmaps.mod-startPluginManager(): error initializing plugin: /opt/glite/lib64/modules/lcmaps_c_pep.mod  
Line 53: Line 61:
 
   Initialization of LCMAPS failed. Please check in syslog or the logfile for LCMAPS (when able to be opened) for more details
 
   Initialization of LCMAPS failed. Please check in syslog or the logfile for LCMAPS (when able to be opened) for more details
  
−
On the shell the exit code of gLExec will signal a 202. This indicates a system level error only resolvable by the System Administrator. This is not a true statement and a known bug in the LCMAPS plug-in C-PEP which will be resolved in the new release and changed to a 203 (authorization failed) error.  
+
For versions ≥ 1.0.0 this behaviour is fixed, gLExec will give a 203 exit code in the absence of a usable X509_USER_PROXY.
  
−
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
+
For more information on the gLExec exit codes, please visit: [[Exit codes of gLExec]]
  
 
=== Troubleshooting hints: using SCAS ===
 
=== Troubleshooting hints: using SCAS ===
Line 67: Line 75:
 
On the shell the exit code of gLExec will signal a 203. This indicates an authorization failure.  
 
On the shell the exit code of gLExec will signal a 203. This indicates an authorization failure.  
  
−
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
+
For more information on the gLExec exit codes, please visit: [[Exit codes of gLExec]]
  
 
== GLEXEC_SOURCE_PROXY (optional) ==
 
== GLEXEC_SOURCE_PROXY (optional) ==
  
−
gLExec has the capability of transferring the proxy file from the calling environment to the target user's environment. The resulting file will then be accessible by the target user. The GLEXEC_SOURCE_PROXY holds the path to the proxy file that needs to be transferred.
+
gLExec has the capability of transferring the proxy file from the calling environment to the target user's environment. The resulting file will then be accessible by the target user.
  
−
The setting is optional. If no GLEXEC_SOURCE_PROXY is present for gLExec to use, no proxy file is transferred (version: 0.6.8-3 and older).
+
''NOTE'': in version 0.8 and higher, the transfer of the proxy file and/or the setting of the corresponding variables in the target environment can be disabled in the config file, using the ''create_target_proxy'' option.
 +
 
 +
The GLEXEC_SOURCE_PROXY holds the path to the proxy file that needs to be transferred. The setting is optional. If no GLEXEC_SOURCE_PROXY is present for gLExec to use, the behaviour depends on the gLExec version, see also [[#Behaviour overview|Behaviour overview]]:
 +
* for version 0.6.8-3 and older, no proxy file is transferred.
 +
* for version 0.7.0 and higher a default equal to GLEXEC_CLIENT_CERT is used.
  
 
When the GLEXEC_SOURCE_PROXY is set:
 
When the GLEXEC_SOURCE_PROXY is set:
−
* Contains a file path from the root to the file. Note: "/dir/subdir/../subdir2/proxy" is allowed.
+
* It contains an absolute file path to the proxyfile. Note: "/dir/subdir/../subdir2/proxy" is allowed.
 
* Must be readable by the user account calling gLExec
 
* Must be readable by the user account calling gLExec
−
* Variable must be accessible by gLExec to read.
 
−
** Typically that means to '''export''' it into the current shell.
 
−
* Must be set before calling gLExec.
 
  
−
When the GLEXEC_TARGET_PROXY environment variable is not set, the proxy will be staged in a default location. The location is by default: '''<target user's $HOME>/.glexec/proxy'''. This location is override-able by using the GLEXEC_TARGET_PROXY.
+
When the [[#GLEXEC_TARGET_PROXY_.28optional.29|GLEXEC_TARGET_PROXY]] environment variable is not set, the proxy will be staged in a default location which depends on the gLExec version:
 +
* for version 0.6.8-3 and older: '''<target users $HOME>/.glexec/proxy'''.
 +
* for version 0.7.0 and higher:
 +
* in logging only mode no file is copied
 +
* in switching/setuid mode '''/tmp/x509up_u<target users uid>.glexec.XXXXXX''' where XXXXXX will be substituted by a sequence of 6 random letters.
 +
 
 +
After a proper copying of the proxy file the '''X509_USER_PROXY''' environment variable will be set to point to the new file.
 +
 
 +
For version 0.7.0 in logging only mode without a GLEXEC_TARGET_PROXY setting, the '''X509_USER_PROXY''' environment variable will be set to point to the GLEXEC_SOURCE_PROXY or its default GLEXEC_CLIENT_CERT.
  
−
As a result of the proper staging of the proxy file the '''X509_USER_PROXY''' environment variable will be set. The X509_USER_PROXY will be set to the path of the proxy file. This could be the default location '''<target user's $HOME>/.glexec/proxy''' or the value of GLEXEC_TARGET_PROXY.
+
=== File permissions ===
 +
 
 +
The file permissions of the file must meet the following:
 +
* The proxyfile MUST be owned by the account that calls gLExec. In pilot job framework use cases: owned by the pilot user
 +
* The proxyfile MUST NOT exceed the file permissions of 0700 which means readable, writeable or executable explicitly for the user of the file. Groups, others and special bits are not allowed.
  
 
=== Troubleshooting hints ===
 
=== Troubleshooting hints ===
  
−
If the GLEXEC_SOURCE_PROXY is not set, gLExec will continue without it.
+
If the GLEXEC_SOURCE_PROXY is not set, gLExec will continue without it or with the default (see [[#GLEXEC_SOURCE_PROXY_.28optional.29|GLEXEC_SOURCE_PROXY]])
−
 
 
−
If the GLEXEC_SOURCE_PROXY is set, but the file is unreadable then the following message will occur on the commandline:
 
  
 +
If the GLEXEC_SOURCE_PROXY is set but not valid, for version &lt; 0.7.0:
 +
*If the GLEXEC_SOURCE_PROXY is set to a not-existing file the following message will occur on the commandline:
 
  [gLExec]:  The stat syscall returned with an error for either $GLEXEC_CLIENT_CERT or $GLEXEC_SOURCE_PROXY.
 
  [gLExec]:  The stat syscall returned with an error for either $GLEXEC_CLIENT_CERT or $GLEXEC_SOURCE_PROXY.
−
 
+
*If the GLEXEC_SOURCE_PROXY is set to an unreadable file, or to a file which is readable by more than just the user, the following message will occur on the commandline:
−
The gLExec exit code will be set to 201, which indicates a user (resolvable) error.  
+
[gLExec]:  Expecting a different set of permissions.
 +
In all these cases the gLExec exit code will be set to 201, which indicates a user (resolvable) error.  
  
 
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
 
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
Line 100: Line 122:
 
== GLEXEC_TARGET_PROXY (optional) ==
 
== GLEXEC_TARGET_PROXY (optional) ==
  
−
The GLEXEC_TARGET_PROXY is the full path of the location where the GLEXEC_SOURCE_PROXY is going to be written. By default gLExec uses the path '''<target user's $HOME>/.glexec/proxy''', but this can be changed by setting this environment option.
+
The GLEXEC_TARGET_PROXY is the full path of the location where the GLEXEC_SOURCE_PROXY is going to be written. See [[#GLEXEC_SOURCE_PROXY_.28optional.29|GLEXEC_SOURCE_PROXY]] for the behaviour when unset. Note that the default behaviour has changed between versions &le;0.6.8-3 and &ge;0.7.0, see also [[#Behaviour overview|Behaviour overview]]
  
 
The path will be checked by gLExec to be assured that:
 
The path will be checked by gLExec to be assured that:
Line 107: Line 129:
  
 
As a result of the proper staging of the proxy file the '''X509_USER_PROXY''' environment variable will have the same value as the set GLEXEC_TARGET_PROXY.
 
As a result of the proper staging of the proxy file the '''X509_USER_PROXY''' environment variable will have the same value as the set GLEXEC_TARGET_PROXY.
 +
 +
From version 0.9 onwards, a value /dev/null in this variable will prevent setting the X509_USER_PROXY for the payload and prevents writing a temporary file.
  
 
=== Troubleshooting hints ===
 
=== Troubleshooting hints ===
Line 113: Line 137:
  
 
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
 
For more information on the gLExec exit code, please visit: [[Exit codes of gLExec]]
 +
 +
== Behaviour overview ==
 +
 +
*C - GLEXEC_CLIENT_CERT (mandatory)
 +
*X - X509_USER_PROXY (mandatory)
 +
*S - GLEXEC_SOURCE_PROXY
 +
*T - GLEXEC_TARGET_PROXY
 +
 +
''NOTES'':
 +
* For gLExec &ge; 0.8 the writing/setting of the proxy on the payload depends on the ''create_target_proxy'' setting in the glexec.conf file, see man [http://www.nikhef.nl/grid/lcaslcmaps/man/glexec.conf.5.0_8_0.html glexec.conf(5)].
 +
* For gLExec &ge; 0.9 the writing/setting of the proxy on the payload can also be disabled by specifying the special GLEXEC_TARGET_PROXY value <tt>/dev/null</tt>.
 +
* In the default /tmp/x509up_u<uid>.glexec.XXXXXX the six X are replaced by random letters following mkstemp().
 +
* The rules should be parsed top to bottom, consecutively.
 +
 +
{| border=1
 +
!
 +
! 0.6.8-3
 +
! 0.7.0 logging only
 +
! 0.7.0 setuid
 +
|-
 +
|'''set''' GLEXEC_SOURCE_PROXY
 +
'''set''' GLEXEC_TARGET_PROXY
 +
|file S copied to file T
 +
var X gets value T
 +
|file S copied to file T
 +
var X gets value T
 +
|file S copied to file T
 +
var X gets value T
 +
|-
 +
|'''set''' GLEXEC_SOURCE_PROXY
 +
'''unset''' GLEXEC_TARGET_PROXY
 +
|file S copied to <mapped homedir>/.proxy/glexec<SUP>*</SUP>
 +
var X gets this filepath as value
 +
|var T gets value S
 +
&nbsp;
 +
 +
var X gets value T
 +
|var T gets value /tmp/x509up_u<uid>.glexec.XXXXXX
 +
file S copied to file T
 +
 +
var X set to value T
 +
|-
 +
|'''unset''' GLEXEC_SOURCE_PROXY
 +
'''set''' GLEXEC_TARGET_PROXY
 +
|var X unchanged<SUP>**</SUP>
 +
var T unused
 +
|var S gets value C
 +
file S copied to file T
 +
 +
var X gets value T
 +
|var S gets value C
 +
file S copied to file T
 +
 +
var X gets value T
 +
|-
 +
|'''unset''' GLEXEC_SOURCE_PROXY
 +
'''unset''' GLEXEC_TARGET_PROXY
 +
|var X unchanged<SUP>**</SUP>
 +
|var S gets value C
 +
var T gets value S
 +
 +
&nbsp;
 +
 +
var X gets value T
 +
|var S gets value C
 +
var T gets value /tmp/x509up_u<uid>.glexec.XXXXXX
 +
 +
file copied to file T
 +
 +
var X gets value T
 +
|}
 +
 +
<SUP>*</SUP> in logging only mode this is unwanted behaviour and therefore changed in version 0.7.0.
 +
 +
<SUP>**</SUP> this is unwanted behaviour and therefore changed in version 0.7.0.

Latest revision as of 14:19, 4 April 2012

gLExec uses four environment variables for various reasons. This section is intended to explain what they do in a pragmatic way so that you should be able to work with them.

The environment variables of interest are:

  • GLEXEC_CLIENT_CERT
  • X509_USER_PROXY
  • GLEXEC_SOURCE_PROXY
  • GLEXEC_TARGET_PROXY

Note: do NOT forget to export/setenv these variables, so that they are known to gLExec.

GLEXEC_CLIENT_CERT

gLExec uses this (proxy) certificate as input to know who to authorize and to which account a mapping must be done.

In a Multi User Pilot Job (MUPJ) environment this is a proxy with the identity of the payload user.

The GLEXEC_CLIENT_CERT

  • Contains an absolute file path to the proxyfile. Note: "/dir/subdir/../subdir2/proxy" is allowed.
  • The proxyfile MUST contain a public and private key pair.
  • The proxyfile MUST be readable by the user account calling gLExec.

File permissions

The file permissions of the file must meet the following:

  • The proxyfile MUST be owned by the account that calls gLExec. In pilot job framework use cases: owned by the pilot user
  • The proxyfile MUST NOT exceed the file permissions of 0700 which means readable, writeable or executable explicitly for the user of the file. Groups, others and special bits are not allowed.

Troubleshooting hints for version < 0.6.9

When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with gLExec's input, in particular the absence of a usable GLEXEC_CLIENT_CERT: 

glexec[10301]: LCAS authorization request
glexec[10301]: lcas.mod-lcas_run_va(): Cannot find certificate chain in pem string(failure)
glexec[10301]: lcas.mod-lcas_run_va(): failed

As a result of not being able to present tokens to be authorized, the gLExec tool will exit with a 203 exit code. This indicates that the authorization of the user has failed.

For more information on the gLExec exit code, please visit: Exit codes of gLExec

X509_USER_PROXY (on the calling side)

The X509_USER_PROXY passes through gLExec to the SCAS client or Argus client LCMAPS plug-ins.

In a Multi User Pilot Job (MUPJ) environment this is a proxy with the identity of the Pilot Job Framework Production Manager a.k.a. the Pilot User.

For the interaction with a site central authorization service, such as SCAS, Argus or GUMS, these credentials are used to authenticate at the service. The actual mapping decision is based on the identity of the GLEXEC_CLIENT_CERT proxy. The credentials will be used in the policy decision at the service, but for the SCAS interaction this identity (by its VOMS credentials for instance) must be whitelisted to be able to interact with the service. The X509_USER_PROXY is used to setup the mutually authenticated secure channel to the authorization service.

The X509_USER_PROXY

  • Contains an absolute file path to the proxyfile. Note: "/dir/subdir/../subdir2/proxy" is allowed.
  • The proxyfile MUST contain a public and private key pair.
  • The proxyfile MUST be readable by the user account calling gLExec

Troubleshooting hints: using Argus

When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with LCMAPS plug-in's input, in particular the absence of a usable X509_USER_PROXY.

For LCMAPS c-pep plugin version < 1.0.0 this will incorrectly lead to a gLExec exit code of 202 (misconfigured site error), instead of the correct 203 (authorization failed) exit code. This leads to the following error in the log file: 

lcmaps.mod-startPluginManager(): error initializing plugin: /opt/glite/lib64/modules/lcmaps_c_pep.mod 
lcmaps.mod-lcmaps_init() error: could not start plugin manager 
 Initialization of LCMAPS failed. Please check in syslog or the logfile for LCMAPS (when able to be opened) for more details

For versions ≥ 1.0.0 this behaviour is fixed, gLExec will give a 203 exit code in the absence of a usable X509_USER_PROXY.

For more information on the gLExec exit codes, please visit: Exit codes of gLExec

Troubleshooting hints: using SCAS

When this environment variable is not available or when the given path is not readable by gLExec the following error messages will occur in the gLExec log indicating a problem with LCMAPS plug-in's input, in particular the absence of a usable X509_USER_PROXY: 

lcmaps_plugin_scas_client-plugin_run(): No client side credentials for SSL handshake to the SCAS service presented. 
                                                 Not in the configuration file and not in the $X509_USER_{PROXY,CERT,KEY} environment variables. 
lcmaps_plugin_scas_client-plugin_run(): scas client plugin failed

On the shell the exit code of gLExec will signal a 203. This indicates an authorization failure.

For more information on the gLExec exit codes, please visit: Exit codes of gLExec

GLEXEC_SOURCE_PROXY (optional)

gLExec has the capability of transferring the proxy file from the calling environment to the target user's environment. The resulting file will then be accessible by the target user.

NOTE: in version 0.8 and higher, the transfer of the proxy file and/or the setting of the corresponding variables in the target environment can be disabled in the config file, using the create_target_proxy option.

The GLEXEC_SOURCE_PROXY holds the path to the proxy file that needs to be transferred. The setting is optional. If no GLEXEC_SOURCE_PROXY is present for gLExec to use, the behaviour depends on the gLExec version, see also Behaviour overview:

  • for version 0.6.8-3 and older, no proxy file is transferred.
  • for version 0.7.0 and higher a default equal to GLEXEC_CLIENT_CERT is used.

When the GLEXEC_SOURCE_PROXY is set:

  • It contains an absolute file path to the proxyfile. Note: "/dir/subdir/../subdir2/proxy" is allowed.
  • Must be readable by the user account calling gLExec

When the GLEXEC_TARGET_PROXY environment variable is not set, the proxy will be staged in a default location which depends on the gLExec version:

  • for version 0.6.8-3 and older: <target users $HOME>/.glexec/proxy.
  • for version 0.7.0 and higher:
* in logging only mode no file is copied
* in switching/setuid mode /tmp/x509up_u<target users uid>.glexec.XXXXXX where XXXXXX will be substituted by a sequence of 6 random letters.

After a proper copying of the proxy file the X509_USER_PROXY environment variable will be set to point to the new file.

For version 0.7.0 in logging only mode without a GLEXEC_TARGET_PROXY setting, the X509_USER_PROXY environment variable will be set to point to the GLEXEC_SOURCE_PROXY or its default GLEXEC_CLIENT_CERT.

File permissions

The file permissions of the file must meet the following:

  • The proxyfile MUST be owned by the account that calls gLExec. In pilot job framework use cases: owned by the pilot user
  • The proxyfile MUST NOT exceed the file permissions of 0700 which means readable, writeable or executable explicitly for the user of the file. Groups, others and special bits are not allowed.

Troubleshooting hints

If the GLEXEC_SOURCE_PROXY is not set, gLExec will continue without it or with the default (see GLEXEC_SOURCE_PROXY)

If the GLEXEC_SOURCE_PROXY is set but not valid, for version < 0.7.0:

  • If the GLEXEC_SOURCE_PROXY is set to a not-existing file the following message will occur on the commandline:
[gLExec]:   The stat syscall returned with an error for either $GLEXEC_CLIENT_CERT or $GLEXEC_SOURCE_PROXY.
  • If the GLEXEC_SOURCE_PROXY is set to an unreadable file, or to a file which is readable by more than just the user, the following message will occur on the commandline:
[gLExec]:   Expecting a different set of permissions.

In all these cases the gLExec exit code will be set to 201, which indicates a user (resolvable) error.

For more information on the gLExec exit code, please visit: Exit codes of gLExec

GLEXEC_TARGET_PROXY (optional)

The GLEXEC_TARGET_PROXY is the full path of the location where the GLEXEC_SOURCE_PROXY is going to be written. See GLEXEC_SOURCE_PROXY for the behaviour when unset. Note that the default behaviour has changed between versions ≤0.6.8-3 and ≥0.7.0, see also Behaviour overview

The path will be checked by gLExec to be assured that:

  • The directory in which the proxy will be written is owned by the target user.
  • Is writeable by the target user.

As a result of the proper staging of the proxy file the X509_USER_PROXY environment variable will have the same value as the set GLEXEC_TARGET_PROXY.

From version 0.9 onwards, a value /dev/null in this variable will prevent setting the X509_USER_PROXY for the payload and prevents writing a temporary file.

Troubleshooting hints

If gLExec is unable to write to the indicated target location a 201 exit code is returned by gLExec, indicating a user (resolvable) error.

For more information on the gLExec exit code, please visit: Exit codes of gLExec

Behaviour overview

  • C - GLEXEC_CLIENT_CERT (mandatory)
  • X - X509_USER_PROXY (mandatory)
  • S - GLEXEC_SOURCE_PROXY
  • T - GLEXEC_TARGET_PROXY

NOTES:

  • For gLExec ≥ 0.8 the writing/setting of the proxy on the payload depends on the create_target_proxy setting in the glexec.conf file, see man glexec.conf(5).
  • For gLExec ≥ 0.9 the writing/setting of the proxy on the payload can also be disabled by specifying the special GLEXEC_TARGET_PROXY value /dev/null.
  • In the default /tmp/x509up_u<uid>.glexec.XXXXXX the six X are replaced by random letters following mkstemp().
  • The rules should be parsed top to bottom, consecutively.
0.6.8-3 0.7.0 logging only 0.7.0 setuid
set GLEXEC_SOURCE_PROXY

set GLEXEC_TARGET_PROXY

file S copied to file T

var X gets value T

file S copied to file T

var X gets value T

file S copied to file T

var X gets value T

set GLEXEC_SOURCE_PROXY

unset GLEXEC_TARGET_PROXY

file S copied to <mapped homedir>/.proxy/glexec*

var X gets this filepath as value

var T gets value S

 

var X gets value T

var T gets value /tmp/x509up_u<uid>.glexec.XXXXXX

file S copied to file T

var X set to value T

unset GLEXEC_SOURCE_PROXY

set GLEXEC_TARGET_PROXY

var X unchanged**

var T unused

var S gets value C

file S copied to file T

var X gets value T

var S gets value C

file S copied to file T

var X gets value T

unset GLEXEC_SOURCE_PROXY

unset GLEXEC_TARGET_PROXY

var X unchanged** var S gets value C

var T gets value S

 

var X gets value T

var S gets value C

var T gets value /tmp/x509up_u<uid>.glexec.XXXXXX

file copied to file T

var X gets value T

* in logging only mode this is unwanted behaviour and therefore changed in version 0.7.0.

** this is unwanted behaviour and therefore changed in version 0.7.0.

Retrieved from "https://wiki.nikhef.nl/grid/index.php?title=Proxy_file_handling_in_gLExec&oldid=7738"