DAQ systems

From Atlas Wiki
Revision as of 15:26, 9 February 2023 by Aalonso@nikhef.nl (talk | contribs) (fix FELIX instructions link)
Jump to navigation Jump to search

FELIX is one of the main components of the new ATLAS TDAQ architecture. This DAQ system will be installed in all the ATLAS sub-detectors in Run 4. At Nikhef, a setup has been assembled in lab N221 with the purpose of training before petal arrival. In this setup, shown below, Phase-I FELIX (FLX-712) is used. Due to the lack of petals at the time, the sensor is an old barrel module with one ABC chip and one HCC chip, but no sensing material and no AMAC chip (there is a wire bond in its place to provide power). The VLDB+ with the Nikhef adapter board substitutes the EoS board, since the module has no AMAC chip, there is no external connection between the VLDB+ and the Nikhef adapter board, but whenever we use a module with it, we will need to connect them through a mini-HDMI cable. The lpGBT on the VLDB+ is not efused. For more information about this training setup, you can contact Andrea García Alonso ([[1]]).

Nikhef FELIXservers 20220517 electronics dep Back-2.jpg
FELIXsetup september22-2.jpg


How to connect to FELIX: Follow these FELIX instructions !!!!


To run scans, the necessary repositories are:

https://gitlab.cern.ch/itk-strips-at-sr1/scan-tools-for-yarr/-/tree/EC-Freiburg

https://gitlab.cern.ch/arnaez/YARR/-/tree/devel_SR1



Useful links I gathered during the first months working with the FELIX system:

The ATLAS FELIX project webpage
https://atlas-project-felix.web.cern.ch/atlas-project-felix/
FELIX manual latest version
https://atlas-project-felix.web.cern.ch/atlas-project-felix/dev/staging/www/user/felix-user-manual/versions/Latest/
ATLAS FELIX lab (also called playground) at Nikhef
https://redmine.nikhef.nl/et/projects/atlas-felix/wiki/Atlas_setup_in_H148
Latest FELIX Phase II PDR indico page (status and introduction of the software, hardware and test activities)
https://indico.cern.ch/event/1108368/
TTC specs on edms
https://edms.cern.ch/document/2379978/1
For further reading about timing, trigger and control
relevant page in the TDAQ phase II TDR: https://cds.cern.ch/record/2285584/files/ATLAS-TDR-029.pdf#page=105
LPGBT webpage
https://lpgbt.web.cern.ch/lpgbt/

For access to the lpgbtv1 manual, subscribe to lpgbt-users@cern.ch egroup

Other egroups (meetings, information, updates etc): atlas-tdaq@cern.ch, atlas-tdaq-software@cern.ch, atlas-tdaq-felix-users@cern.ch, atlas-tdaq-felix-developers@cern.ch

Tests at CERN SR1
https://twiki.cern.ch/twiki/bin/viewauth/Atlas/FelixStripsTestsAtSR1, https://twiki.cern.ch/twiki/bin/viewauth/Atlas/FelixStripsTestsAtSR1#lpGBT_configuration_with_VLDB
Twiki page of the DAQ Demonstrator
https://twiki.cern.ch/twiki/bin/viewauth/Atlas/HGTDDaqDemonstratorEMU
Raspberry Pi 4
https://pigbt.web.cern.ch/manual/quick_start.html#connect-to-pigbt-wired-network
lpGBT
https://lpgbt.web.cern.ch/lpgbt/v0/introduction.html
FELIX Software for testing
https://gitlab.cern.ch/itk-felix-sw/itk-felix-sw/-/blob/master/Readme.md
ABCStar
https://edms.cern.ch/ui/file/1809573/1/ABCStar_Spec_07.66.pdf
HCCStar
https://edms.cern.ch/ui/file/1809590/1/HCCStar_Spec_10.pdf