Sensor connections

Feedthroughs

This page contains the information about the connections made with the sensors trough the electrical feedthroughs. There are three feedthroughs as seen on the image below, the different feedthroughs will be numbered. We will also, when possible try to keep every feedthrough dedicated to one sort of sensor. The pins will be number 1 to 9 from top-left to bottom right as showed in the schematic below.

• Feedthrough 1: Not dedicated
• Feedthrough 2: Temperature sensors
• Feedthrough 3: SiPM's

Temperature sensor

Temperature sensor 1

The first temperature sensor will be connected using a D-sub feedthrough number 2. And will be connected using pin 1 (blue) and pin 6 (red).

Cable outside

Cable inside [[File:|frameless|caption}}

Temperature sensor 2

tekst

Temperature sensor 3

tekst

Silicon Photomultipliers

SiPM 1

The first SiPM will be connected using a D-sub feedthrough number 3. And will be connected using pin 1 (grey) and pin 6 (white).

Cable outside

Cable inside