Difference between revisions of "Bieten"

From PDP/Grid Wiki
Jump to navigationJump to search
Line 25: Line 25:
  
 
This machine is connected with a Dell PowerConnect 3524 switch to the Dell MD3200 storage controllers.
 
This machine is connected with a Dell PowerConnect 3524 switch to the Dell MD3200 storage controllers.
 +
 +
Hostnames of the management machine:
 +
* biet-mngt.ipmi.nikhef.nl is to reach the machine itself.
 +
* biet-mngt-oobm.ipmi.nikhef.nl to reach the ipmi/drac/oobm interface of the machine.
 +
 +
= To access and configure the storage =
 +
Log onto the biet-mngt machine as root. Make sure that X forwarding is configured and working.
 +
Start the following command: /opt/dell/mdstoragesoftware/mdstoragemanager/client/SMclient
 +
This will start the Dell storage managent software.

Revision as of 14:17, 24 August 2011

How to manage and configure the Suiker Bieten

First some specs about the cluster:

  • 4 x Dell R710
    • 2 x Intel X5667 quadcore
    • 96GB DDR3 ram
    • 2 x 600GB 15K RPM SAS disks in hardware raid 1
    • Intel dual 10Ge X520-DA2 network card
    • iDRAC6 enterprise management card
    • 2 x SAS 6Gbps External Controller
    • Onboard 1Ge network cards are disabled in the BIOS
  • 4 x Dell MD3200
    • 2 raid controllers
    • 12 x 2TB NearLine SAS 6Gbps 7.2k 3.5" harddrives
    • 4 x Dell MD1200
      • 12 x 2TB NearLine SAS 6Gbps 7.2k 3.5" harddrives

There is also one machine for the management of the storage systems:

  • Dell R210II
    • Intel Core i3-2100
    • 4GB DDR3 ram
    • 250GB 7.2K RPM SATA disk
    • 2 x 1Gbit network card
    • iDRAC6 enterprise management card

This machine is connected with a Dell PowerConnect 3524 switch to the Dell MD3200 storage controllers.

Hostnames of the management machine:

  • biet-mngt.ipmi.nikhef.nl is to reach the machine itself.
  • biet-mngt-oobm.ipmi.nikhef.nl to reach the ipmi/drac/oobm interface of the machine.

To access and configure the storage

Log onto the biet-mngt machine as root. Make sure that X forwarding is configured and working.

Start the following command: /opt/dell/mdstoragesoftware/mdstoragemanager/client/SMclient
This will start the Dell storage managent software.