Difference between revisions of "Agile testbed"

From PDP/Grid Wiki
Jump to navigationJump to search
(Remove link to update plan)
(Update example network interfaces config)
Line 255: Line 255:
 
! ACL
 
! ACL
 
|-
 
|-
| 2
+
| 82
 
| [[NDPF_System_Functions#P4CTB|P4CTB]]
 
| [[NDPF_System_Functions#P4CTB|P4CTB]]
 
| 194.171.96.16/28
 
| 194.171.96.16/28
 
| 194.171.96.30
 
| 194.171.96.30
| br2
+
| br82
 
| No inbound traffic on privileged ports
 
| No inbound traffic on privileged ports
 
|-
 
|-
| 8
+
| 88
 
| [[NDPF_System_Functions#Nordic (Open_Experimental)|Open/Experimental]]
 
| [[NDPF_System_Functions#Nordic (Open_Experimental)|Open/Experimental]]
 
| 194.171.96.32/27
 
| 194.171.96.32/27
 
| 194.171.96.62
 
| 194.171.96.62
| br8
+
| br88
 
| Open
 
| Open
 
|-
 
|-
| 17 (untagged)
+
| 97 (untagged)
 
| local
 
| local
 
| 10.198.0.0/16
 
| 10.198.0.0/16
Line 276: Line 276:
 
| testbed only
 
| testbed only
 
|- style="color: #999;"
 
|- style="color: #999;"
| 4
+
| 84
 
| [[NDPF System Functions#MNGT/IPMI|IPMI and management]]
 
| [[NDPF System Functions#MNGT/IPMI|IPMI and management]]
 
|  172.20.0.0/16
 
|  172.20.0.0/16
Line 288: Line 288:
  
 
  # The primary network interface
 
  # The primary network interface
  auto eth1
+
  auto eth0
  iface eth1 inet manual
+
  iface eth0 inet manual
 +
up ip link set $IFACE mtu 9000
 
   
 
   
 
  auto br0
 
  auto br0
 
  iface br0 inet dhcp
 
  iface br0 inet dhcp
  bridge_ports eth1
+
  bridge_ports eth0
 
   
 
   
  auto br0.2
+
  auto eth0.82
  iface br0.2 inet manual
+
  iface eth0.82 inet manual
  vlan_raw_device br0
+
up ip link set $IFACE mtu 9000
 +
  vlan_raw_device eth0
 
   
 
   
 
  auto br2
 
  auto br2
 
  iface br2 inet manual
 
  iface br2 inet manual
        bridge_ports br0.2
+
bridge_ports eth0.82
 
   
 
   
  auto br2.100
+
  auto eth0.88
  iface br2.100 inet manual
+
  iface eth0.88 inet manual
  vlan_raw_device br2
+
        vlan_raw_device eth0
 +
 +
auto br8
 +
iface br8 inet manual
 +
  bridge_ports eth0.88
 +
 +
auto vlan100
 +
iface vlan100 inet manual
 +
        up ip link set $IFACE mtu 1500
 +
        vlan_raw_device eth0.82
 
   
 
   
 
  auto br2_100
 
  auto br2_100
 
  iface br2_100 inet manual
 
  iface br2_100 inet manual
  bridge_ports br2.100
+
  bridge_ports vlan100
  
In this example VLAN 2 is configured on the first bridge, br0, and this interface is used in a second bridge, br2; the nested VLAN 2.100 is configured on this brigde, and finally a bridge 2_100 is made. So VMs that are added to this brigde will only receive traffic coming from VLAN 100 nested inside VLAN 2.
+
In this example VLAN 82 is configured on the first bridge, br0, and this interface is used in a second bridge, br2; the nested VLAN 82.100 is configured on this brigde, and finally a bridge 2_100 is made. So VMs that are added to this bridge will only receive traffic coming from VLAN 100 nested inside VLAN 2.
  
  

Revision as of 14:47, 9 January 2015