Difference between revisions of "Bachelor Projects"

From Education Wiki
Jump to navigation Jump to search
Line 22: Line 22:
  
 
Supervisors: M.P.  Decowski & J. Aalbers  -->
 
Supervisors: M.P.  Decowski & J. Aalbers  -->
 
  
 
==== Neutrinoless double beta decay sensitivity study in future dark matter detectors ====
 
==== Neutrinoless double beta decay sensitivity study in future dark matter detectors ====
Line 32: Line 31:
 
Supervisors: M.P. Decowski & A. Tiseni
 
Supervisors: M.P. Decowski & A. Tiseni
  
 +
==== Shaking Dark Matter detectors ====
  
 +
Our XENON1T detector is built in the lab underneath the Gran Sasso mountains in central Italy. The lab is very well suited for low-background experiments due to the 1.5km of rock overburden.
 +
However, as you may know, cental Italy has been plagued by earthqaukes over the past decade, with the most recentones occurring in January 2017. We need a BSc student to investigate the
 +
details of such earthquakes in our underground lab. What are the magnitdues by which stuff is moving underground? What are the accelerations? What is the potential effect on our experimental
 +
setup? What would ahppen if an earthquake happens much closer to our lab? Furthermore we are interested to find out whether Earthquakes can be predicted. Some papers claim that before
 +
an earthquake the radon emanating from rock increases. In our lab we measure the radon concentration as a function of time: can you find a correlation between the measurements and recent
 +
earthquakes?
  
 +
If you are interested in finding out more about earthquakes, please contact M.P. Decowski or A.P. Colijn
  
 
==== XAMS - a baby dark matter detector ====
 
==== XAMS - a baby dark matter detector ====

Revision as of 15:01, 15 February 2017

Bachelor Projects

Extreme Astronomy – Preparing for CTA, the Next-Generation Gamma-Ray Observatory

The Cherenkov Telescope Array (CTA) is a planned facility for measuring gamma rays from space covering more than four orders of magnitude in energy, up to energies exceeding 100 TeV. CTA employs the imaging atmospheric Cherenkov technique to measure properties of cosmic gamma rays. This technique is based on measuring Cherenkov light emitted during the development of a gamma-ray air shower. CTA will be built at two experimental sites, one in the Northern, one in the Southern hemisphere, and will consist of up to 100 telescopes. It represents a major leap forward in sensitivity and precision for gamma-ray astronomy, and will allow us to explore very-high-energy processes of the extreme Universe at an unprecedented level.

Two projects for students are available at the CTA group of UvA in the field of optical and photonic R&D contributing to the starting phase of CTA. For the first project the student will conduct measurements to characterise novel kinds of single-photon detectors, referred to as silicon photomultipliers, and evaluate different types of these sensors for their use for CTA. For the second project the student will develop and test an imaging system making use of a liquid crystal display. This flexible light source will be able to mimic images from different light sources of the night sky as seen by cameras of CTA, for instance gamma-ray air showers or stars, and will be used for camera tests and calibration.


Supervisors: David Berge, Maurice Stephan (postdoc)

Dark Matter

Neutrinoless double beta decay sensitivity study in future dark matter detectors

The discovery of neutrino oscillation (Nobel Physics 2015) means that neutrinos have mass. We already know that their masses are tiny, more than one million times smaller than the next-lightest particle in the standard model, the electron. This raises the question if the mass-generation mechanism is the same for neutrinos as it is for the other subatomic particles. In particular, since neutrinos are electrically neutral, they could be their own anti-particles - we call these types of particles Majorana. The only practical way to discover if neutrinos are Majorana is through the search of an extremely rare radioactive decay called neutrinoless double beta decay (0n2b). A few isotopes are candidates for this process, among them Xe-136. The natural abundance of Xe-136 in natural xenon is about 9%, and this gives the opportunity to look for a 0n2b signal in xenon-based dark matter detectors like XENON1T and the future XENONnT and DARWIN detectors.

We are looking for a student interested in doing a sensitivity study for 0n2b in XENONnT and the DARWIN experiments. The first goal will be to understand the physics addressed in neutrinoless double beta decay. Then the student will inventory possible backgrounds for the signal, use a (controversial) claim of a 0n2b signal as a benchmark and finally obtain the sensitivity of these future detectors. The work will involve simulations and analysis, building on an existing framework developed in our group.

Supervisors: M.P. Decowski & A. Tiseni

Shaking Dark Matter detectors

Our XENON1T detector is built in the lab underneath the Gran Sasso mountains in central Italy. The lab is very well suited for low-background experiments due to the 1.5km of rock overburden. However, as you may know, cental Italy has been plagued by earthqaukes over the past decade, with the most recentones occurring in January 2017. We need a BSc student to investigate the details of such earthquakes in our underground lab. What are the magnitdues by which stuff is moving underground? What are the accelerations? What is the potential effect on our experimental setup? What would ahppen if an earthquake happens much closer to our lab? Furthermore we are interested to find out whether Earthquakes can be predicted. Some papers claim that before an earthquake the radon emanating from rock increases. In our lab we measure the radon concentration as a function of time: can you find a correlation between the measurements and recent earthquakes?

If you are interested in finding out more about earthquakes, please contact M.P. Decowski or A.P. Colijn

XAMS - a baby dark matter detector

The Nikhef dark matter group has a small version of the XENON1T detector in the lab. With this detector which is more than a factor 1000 smaller than the newly built XENON1T detector in Gran Sasso we (i) investigate the properties of xenon as a detector, and (ii) aim to improve the methods we use in the XENON1T experiment to detect dark matter. The principles of operation of this smal detector are identical to its big sibling in Gran Sasso.

We are looking for a student interested in dark matter physics, and with a focus on working in the lab (hands-on profile). The student will work with the new AmBe neutron source we have acquired before the start of the project. With such a source we can generate signals in our lab setup that ar identical to the signals we expect from real dark matter interactions in xenon. The goal of this project will be to do the first measurements with the neutron source and analyze the data. Depending on the progress with the hardware we intend to complement the measurements with Monte Carlo study of neutron transport in xenon.

Supervisors: A.P. Colijn & E. Hogenbirk

Radon is bad for Dark Matter

Radon is the dominant background for xenon based dark matter detectors, like the XENON1T experiment. In our lab at Nikhef we are investigating ways to reduce or eliminate the effect of radon on our sensitivity. For our lab setup XAMS we have designed and constructed a radon detector, that can be used in xenon systems at high-pressure. This completely new detector is now waiting for a BSc student to fully chracterize and use it. During this project you will first study the effect that radon contaminations have on dark matter detectors, then you will start working to understand our new radon detector in detail. You will learn howto use a radioactive source to calibrate the detector: this is something which is not easy and has not been done before in our lab. If you manage to succesfully calibrate the detector, we then want to incorporate it into our lab xenon system at Nikhef and maybe at some later stage in the real XENON1T detector!

The profile of the student to work on this project is broad. I expect a good theoretical knowledge in order to quickly get upto speed with understanding dark mater detectors, and in addition I need 'lab-creativity' in order to develop methods for calibrating the new detector. If a good method is developed, it will be used for many years by the Nikhef dark matter group and beyond.

Supervisors: A.P. Colijn & E. Hogenbirk

ATLAS

ATLAS (1): Searching for new physics with the Higgs and W bosons

The strength of the Higgs interactions with electroweak bosons are precisely defined in the Standard Model. Therefore they are sensitive probes of the mechanism of electroweak symmetry breaking and enable searches for new physics beyond the SM. With the data collected by the ATLAS experiment in years 2015-2016 we plan to measure separately the Higgs coupling to longitudinally and transversely polarised W bosons in a process of weak boson fusion. To maximise experimental sensitivity we are developing techniques to separate the signal from background processes. You will take part in investigating possible improvements from reconstructing events in reference frames boosted with respect to the detector. During the project you will learn modern experimental analysis techniques. This project is a part of Vector Boson Scattering Coordination and Action Network (VBSCan) which connects researchers studying this and related topics worldwide.

Supervisors: Pamela Ferrari, Magdalena Slawinska, Bob van Eijk


ATLAS (2): Dark-matter-motivated searches for supersymmetric particles at the LHC

Supersymmetry, a symmetry between fermions and bosons in particle physics, may provide a particle that could be the dark matter in the universe. The observation of an excess of gamma rays originating from the centre of our galaxy could be explained in a model where supersymmetric dark matter particles annihilate each other in the galactic centre, leading to gamma rays.

Given the model parameters, it should also be possible to produce such particles at the LHC, at CERN in Geneva. But it is not so easy to observe them: the signal is small, and the noise (background) is large. In this project, we will use simulations of signal and background to optimize experimental searches for such particles with the ATLAS detector, apply them to the data collected in 2015, and prepare for the new data in 2016 and later.Where possible, we will explore new machine learning techniques.

Supervisors: Paul de Jong, Broos Vermeulen


ATLAS (3): Simulations / Quality tests for the ATLAS High-Luminosity LHC Upgrade

One of the key sub-systems of the ATLAS experiment at the Large Hadron Collider (LHC) is the Inner Detector (ID), designed to provide excellent charged particles momentum and vertex resolution measurements.

At Phase-2 of the LHC run, in ~2025, the operating luminosity of the collider will be increased significantly. This will imply an upgrade of all ATLAS subsystems. In particular, the ID will be fully replaced with a tracker completely made of Silicon, having higher granularity and radiation hardness. The R&D process for the new ATLAS ID is now ongoing. Different geometrical layouts are simulated and their performance is studied under different operating conditions in search for the optimal detector architecture. Also, the performance of the new Si-sensors/modules is under investigation with dedicated laboratory tests.

The focus of the project could be on the simulation of the High-Luminosity LHC version of the ATLAS Inner Detector. The student will learn how a high-energy physics experiment is designed and optimized. Alternatively, if possible at that moment, the student could work on a project at the Nikhef Silicon laboratory at the test-bench for new ATLAS Si-strip detectors and participate in the quality assurance procedure for the new ATLAS Si detectors.

ATLAS (4): Higgs productie in Run-2 van de LHC

In de eerste run van de LHC is onder andere bij het ATLAS experiment het Higgs deeltje gevonden. Nu is de tweede run begonnen en kan het Higgs deeltje worden bevestigd. Door de verhoogde energie ziet de achtergrond er echter heel anders uit, dus is de optimalisatie van het wegsnijden van de achtergronden qua fysica anders. Voor je bachelor project kan met behulp van de ATLAS detector het Higgs deeltje in run twee komen vinden.

Supervisors: Lydia Brenner, Wouter Verkerke

ATLAS (5): De lange staart van het Higgs boson

HiggsMassa.png


Na de ontdekking van het Higgs boson in 2012 zijn we druk bezig om te kijken of zijn eigenschappen overeenkomen met de voorspellingen van het Standaard Model. Een van de belangrijkste eigenschappen is de zogenaamde breedte van het Higgs boson. Als het Higgs boson naast de Standaard Model deeltjes ook in exotische nieuwe speeltje uit elkaar kan vallen (bijvoorbeeld donkere materie) dan zal dat ale eerste zichtbaar worden in een afwijking van de breedte tov de verwachting. We gaan in dit project uitzoeken hoe de strategie die nu gebruikt wordt (meten van de hoeveelheid Higgs bosonen met een extreem hoge massa) precies werkt en kijken of we door het toevoegen van nieuwe ideeën een verbetering kunnen aanbrengen.


Specifiek: We gaan eerst in detail de eigenschappen bekijken van het Higgs signaal en de twee achtergronden die er het meest op lijken. Daarna gaan we op zoek naar de verschillen en een manier waarop we onze kennis daarover kunnen gebruiken om gevoeliger te worden voor het Higgs signaal.

Supervisors: Hella Snoek, Ivo van Vulpen

E-mail: H.Snoek_at_nikhef.nl & Ivo.van.Vulpen_at_nikhef.nl





ATLAS (6): Single Top quark productie als probe voor physics beyond the Standard Model

Single top quark productie is een belangrijk signaal voor het ATLAS experiment bij de LHC van CERN. Het top quark vervalt in andere deeltjes waarvan de gemeten hoekverdelingen met de theorie geconfronteerd kunnen worden. Voor de analyse van de nieuwe 13TeV RunII data zijn we een studie begonnen, waarbij we nieuwe fysica in het Standaard Model modelleren en deze doorrekenen tot gesimuleerde hoekverdelingen. De volgende stap, die heel goed door een bachelorstudent uitgevoerd kan worden, is de analyse van deze (afwijkende) hoeverdelingen. Hoe kunnen de hoeken van de vervalsproducten het beste gemeten worden? Welke verdelingen zijn het gevoeligst voor nieuwe fysica?

De student moet affiniteit hebben met programmeren. We werken in dit project weliswaar in C++, maar een goede basis in Python is afdoende. Voor het schrijven van je scriptie zal je ook enige theorie moeten begrijpen m.b.t. de productie van top quarks.

Supervisors: Marcel Vreeswijk (h73_at_nikhef.nl) en Marc de Beurs (mdebeurs_at_nikhef.nl)

KM3Net

The KM3NeT collaboration is constructing a new generation neutrino telescope with a volume of several cubic kilometers (final configuration) in the deep waters of the Mediterranean Sea. With the data, scientists will look for the astrophysical sources of neutrinos such as supernovae, colliding stars or gamma-ray bursts. In the domain of particle physics the properties of neutrinos will be investigated, in particular the unknown neutrino mass hierachy.

The KM3NeT telescope detects the Cherenkov light emitted by the secondary particles produced in neutrino interactions using an array of thousands of sensitive 3 inch photo-multiplier tubes housed in 17 inch pressure resistant glass spheres, digital-optical-modules (DOMs), together with electronics. The DOMs are oriented along 700m long vertical lines, called detection units.

The first phase of the KM3NeT neutrino telescope is currently under construction, with the first two detection units operational at 3500m depth in the Mediterranean Sea, 100 km off the coast of Sicily.


KM3NeT (1): Photon counting in KM3NeT

The details of a neutrino interaction, such as its incoming direction and energy, determine the pattern, time and amount, of recorded photons (´hits´) by the photo-multplier tubes. The time of arrival is recorded with nanosecond accuracy and the amount of photons is encoded in the length of the pulse(time-over-threshold, ToT). Currently, only the photon arrival time and the number of photo-multipliers that record a hit are used in reconstructing event properties. In this project, the distributions of the ToT mainly originating from photons from potassium-40 decays in the sea-water and from atmospheric muons passing through the water will be studied. The goals are to investigate the properties of the ToT distributions obtained from data and simulation, in particular the dependence on the photo-multiplier efficiency and atmospheric muon flux. In this project we will be extensively using the programming language C++ to analyse the data, so a reasonable proficiency is required.

Supervisors: Ronald Bruijn & Karel Melis

Email: rbruijn_at_nikhef.nl

KM3NeT (2): Cosmic (relic) neutrino background

CMBPlanck.png

Je kent waarschijnlijk het beroemde plaatje van de cosmic microwave background radiation, de fotonen die afkomstig zijn van het moment (ongeveer 380.000 jaar na de Big Bang) waarop atomen gevormd werden en het heelal ineens transparant werd voor fotonen. De 'temperatuur' van deze fotonen is nu afgekoeld tot 2.7 K door de uitzetting van het heelal en het levert een schat aan informatie, bijvoorbeeld over structuurformatie etc. Maar daar gaat dit project niet over.

Ongeveer 1 seconde na de Big bang, veel eerder dan de fotonen dus, ontkoppelden de neutrino's. Deze zogenaamde cosmic neutrino background zweven nog steeds rond in het heelal en hoewel niemand het bestaan van deze neutrino's betwist zijn ze nog niet waargenomen. Tot een paar jaar geleden dacht niemand dat het ons ooit zou lukken om deze neutrino's waar te nemen, maar er is een experiment in de opstartfase (PTOLEMY) die een poging gaat ondernemen. Omdat het niet duidelijk is of het ze gaat lukken gaan we in dit bachelorproject bekijken of we ook op een andere manier de Nobelprijs binnen kunnen slepen met een (uitbreiding van) de KM3Net detector.

Als een neutrino maar genoeg energie heeft kan het in een botsing met deze relic neutrino's een Z boson maken. Deze neutrino's halen dan niet de aarde en als je maar genoeg zeer zeer hoog energetische neutrino's meet moet je dus een tekort zien ten opzichte van wat je verwacht als er geen relic neutrino's in het heelal rondzweven.

Zulke hoog energetische neutrino's kan je niet meten met de huidige opzet van KM3Net omdat de detector te klein is om deze zeer zeldzame neutrino's te zien. Nou is er gelukkig een andere techniek beschikbaar,. Naast het meten van Cherenkov fotonen kunnen we de botsing van de neutrino's ook letterlijk 'horen' met behulp van zeer gevoelige hydrofoons. Puur acoustisch dus. De vraag die nu voor ligt, en ideaal is voor een bachelor project is de volgende: hoe werkt precies een hydrofoon, hoe groot moet een detector zijn om de detectie voor elkaar te krijgen en wat zouden we kunnen leren als dit ooit realiteit wordt ?

We gaan in Python aan de slag om het verwachte signaal te simuleren en om te bestuderen met welke precisie we dit signaal zouden kunnen meten.

Informatie: https://en.wikipedia.org/wiki/Cosmic_neutrino_background

paper: https://arxiv.org/pdf/hep-ph/0412122.pdf

Supervisors: Ernst-Jan Buis, Ivo van Vulpen

E-mail: ejbuis_at_gmail.com & Ivo.van.Vulpen_at_nikhef.nl


VIRGO

"It is anticipated that in the next few years, Advanced LIGO and Advanced Virgo will start observing gravitational waves from binary neutron star mergers. Prior to merger, as two neutron stars spiral towards each other, the tidal field of one star will cause a deformation in the other. These deformations affect the orbital motion, which in turn gets imprinted onto the gravitational wave signal. This way we can find out how deformable a neutron star is in the first place, which will yield information about the interior of neutron stars; the latter is the main open problem in nuclear astrophysics.

To succeed in this, good models are needed for the gravitational waveforms. The best model currently available which can be generated sufficiently fast on a computer to be useful in data analysis, contains a state-of-the art description of tidal effects, but not neutron star spins. It is generally assumed that neutron stars are slowly spinning, but it needs to be determined how measurements of tides would be affected by the absence of spins in our analyses.

In practice, the project will consist of learning how to use pre-existing gravitational wave data analysis tools, setting up simulations based on them, and interpreting the results."

The VIRGO collaboration operates the advanced VIRGO gravitational waves detector in Italy, and forms together with the LIGO collaboration a consortium that analyzes the data from both VIRGO and LIGO. For projects in the Nikhef VIRGO group, please contact Jo van den Brand (jo_at_nikhef.nl) or Chris van den Broeck (vdbroeck_at_nikhef.nl)

LHCb

Begeleider: Sean Benson

Title: Searching for physics beyond the Standard Model with LHCb

The LHCb experiment is designed to study the "The Flavour Problem" in particle physics: Why is the universe dominated by matter over antimatter? Why are there three generations of elementary particles? What is the origin of quark flavour changing interactions.

To solve these riddles, LHCb performs precision measurements on b-quark particle decays. An intriguing signal has recently been observed in the decay of a B-meson to a K* and two muons: Bd→K*μμ, which does not seem to behave according to the predictions of the Standard Model In this project the bachelor student will investigate this further by studying the case where the K* particle decays to a so-called k-short particle and a π0. The observation of such a final state will provide valuable information in the search for physics beyond the Standard Model.

In this ambitious project the student is expected to study both a theory on the mechanism of CP violation with B mesons, in addition to data analysis with B decays. Programming experience in python is required.

The LHCb experiment at CERN analyzes the properties of B-hadrons produced in proton-proton collisions at the LHC. For projects in the LHCb group, please contact Marcel Mark (marcel.merk_at_nikhef.nl)