Difference between revisions of "Master Projects"
Line 62: | Line 62: | ||
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]'' | ''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]'' | ||
− | === The Modulation | + | === The Modulation experiment: Data Analysis === |
− | + | For years there have been controversial claims of potential new-physics on the basis of time-varying decay rates of radioactive sources on top of ordinary exponential decay. While some of these claims have been refuted, others have still to be confirmed or falsified. To this end, a dedicated experiment - the modulation experiment - has been designed and operational for the past four years. Using four identical and independent setups the experiment is almost ready for a final analysis to conclude on these claims. In this project the student will perform this analysis, preferably resulting in a conclusive paper. This will require combining the data of the four setups and close collaboration with a small group constituting a collaboration of the four different involved institutes (Purdue University (USA), Universität Zürich (Switzerland), Centro Brasileiro de Pesquisas Fisicas (Brasil) and Nikhef). This project is data-analysis oriented. Additionally lab-skills can be required as one of the setups is situated at Nikhef. | |
− | ''Contact: [mailto:z37@nikhef.nl Auke Colijn]'' | + | ''Contact: [mailto:z37@nikhef.nl Auke Colijn] and [mailto:j.angevaare@nikhef.nl Joran Angevaare]'' |
=== Detector R&D: Laser Interferometer Space Antenna (LISA) === | === Detector R&D: Laser Interferometer Space Antenna (LISA) === |
Revision as of 08:15, 8 April 2020
Master Thesis Research Projects
The following Master thesis research projects are offered at Nikhef. If you are interested in one of these projects, please contact the coordinator listed with the project.
Projects with September 2020 start
Lepton Collider: Pixel TPC testbeam
In the Lepton Collider group at Nikhef we work on a tracking detector for a future Collider (e.g. the ILC in Japan). We are developing a gaseous Time Projection Chamber with a pixel readout. At Nikhef we have built an 8-quad GridPix module based on the Timepix3 chip, which is a detector of about 20 cm x 40 cm x 10 cm in size. In August 2020 we will test the device at the DESY particle accelerator in Hamburg. For the project you could work on preparations for the test beam (e.g. running the data acquisition, perform data monitoring using our set up in the lab). The next topics will be the participation in the data taking during the test beam at DESY, the analysis of the data using C++ and ROOT and - finally - publication of the results in a scientific journal.
Our latest paper can be found in https://www.nikhef.nl/~s01/quad_paper.pdf [www.nikhef.nl].
Contact: Peter Kluit and Kees Ligtenberg
ATLAS: Top Spin optimal observables using Artificial Intelligence
The top quark has an exceptional high mass, close to the electroweak symmetry breaking scale and therefore sensitive to new physics effects. Theoretically, new physics is well described in the EFT framework [1]. The (EFT) operators are experimentally well accessible in single top t-channel production where the top quark is produced spin polarized. The focus at Nikhef is the operator O_{tW} with a possible imaginary phase, leading to CP violation. Experimentally, many angular distribution are reconstructed in the top rest frame to hunt for these effects. We are looking for a limited set of optimal observables. The objective of your Master project would be to find optimal observables using simulated events including the detector effects and possible systematic deviations. All techniques are allowed, but promising new developments are methods which involve artifical intelligence. This work could lead to an ATLAS note.
[1] https://arxiv.org/abs/1807.03576
Contact: Marcel Vreeswijk [1] and Jordy Degens [2]
ATLAS: The Next Generation
After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays), advanced analysis techiques (using deep learning methods) and expanding the theory interpretation. Another opportunity would be the development of the first statistical combination of results between the ATLAS and CMS experiment, which could significantly improve the discovery potentional.
[1] https://arxiv.org/abs/1802.04329
Contact: Tristan du Pree and Marko Stamenkovic
ATLAS: The Most Energetic Higgs Boson
The production of Higgs bosons at the highest energies could give the first indications for deviations from the standard model of particle physics, but production energies above 500 GeV have not been observed yet [1]. The LHC Run-2 dataset, collected during the last 4 years, might be the first opportunity to observe such processes, and we have various ideas for new studies. Possible developments include the improvement of boosted reconstruction techniques, for example using multivariate deep learning methods. Also, there are various opportunities for unexplored theory interpretations (using the MadGraph event generator), including effective field theory models (with novel ‘morphing’ techniques) and new interpretations of the newly observed boosted VZ(bb) process.
[1] https://arxiv.org/abs/1709.05543
Contact: Tristan du Pree and Brian Moser
Dark Matter: XENON1T Data Analysis
The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently building the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the data from the XENON1T detector. The work will consist of understanding the detector signals and applying machine learning tools such as deep neutral networks to improve the reconstruction performance in our Python-based analysis tool, following the approach described in arXiv:1804.09641. The final goal is to improve the energy and position reconstruction uncertainties for the dark matter search. There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.
Contact: Patrick Decowski and Auke Colijn
Dark Matter: XAMS R&D Setup
The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 4kg of ultra-pure liquid xenon. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matte rexperiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data him/herself. You will "own" this experiment.
Contact: Patrick Decowski and Auke Colijn
Dark Matter: DARWIN Sensitivity Studies
DARWIN is the "ultimate" direct detection dark matter experiment, with the goal to reach the so-called "neutrino floor", when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2025, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN, as part of a simulation team together with the University of Freiburg and Zurich. We are also working on a "fast simulation" that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills.
Contact: Patrick Decowski and Auke Colijn
Dark Matter: Fast simulation studies
For Dark MAtter experiments it is crucial to understand sources of backgrounds in great detail. The most common way to study the effect of backgrounds to the Dark Matter sensitivity is by the use of Monte Carlo simulations. Unfortunately, the standard Monte Carlo techniques are extremely inefficient. One needs to sometimes simulate millions of events before one background event appears in the Dark Matter search area. We have developed a Monte Carlo technique that accelerates this process by up to 1000x. The method has been validated on very simple and unrealistic detector models. In goal of this project is to make a realistic detector model for the fast detector simulations. For this we are looking for a student with good programming skills, an interest in a software project, and teh desire to deeply understand analysis of Dark Matter experimental data.
Contact: Patrick Decowski and Auke Colijn
Dark Matter & Amsterdam Scientific Instruments: Simulations for Industry
In the Nikhef Dark Matter group we have built up an extensive expertise with Monte Carlo simulations of ionizing radiation. Although these simulations have the aim to estimate background levels in our XENON experiments, the same techniques can be applied to study radiation transport in industrial devices. Amsterdam Scientific Instruments (ASI) is a company at Science Park that develops and sells radiation imaging equipment that is used amongst others in electron microscopy. For this application ASI needs a detailed study of gamma ray backgrounds to optimize shielding for their products. The project aims at optimizing a shielding design based on GEANT4 simulations. The results may be implemented in next generation products of ASI. We are looking for a student with preferably strong computing skills, and with an interest in science-industrial collaboration.
Contact: Patrick Decowski and Auke Colijn
The Modulation experiment: Data Analysis
For years there have been controversial claims of potential new-physics on the basis of time-varying decay rates of radioactive sources on top of ordinary exponential decay. While some of these claims have been refuted, others have still to be confirmed or falsified. To this end, a dedicated experiment - the modulation experiment - has been designed and operational for the past four years. Using four identical and independent setups the experiment is almost ready for a final analysis to conclude on these claims. In this project the student will perform this analysis, preferably resulting in a conclusive paper. This will require combining the data of the four setups and close collaboration with a small group constituting a collaboration of the four different involved institutes (Purdue University (USA), Universität Zürich (Switzerland), Centro Brasileiro de Pesquisas Fisicas (Brasil) and Nikhef). This project is data-analysis oriented. Additionally lab-skills can be required as one of the setups is situated at Nikhef.
Contact: Auke Colijn and Joran Angevaare
Detector R&D: Laser Interferometer Space Antenna (LISA)
The space-based gravitational wave antenna LISA is, without a doubt, one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecraft that are separated by a few million kilometers to measure tiny variations in the distances between test-masses located in each satellite to detect the gravitational waves from sources such as supermassive black holes. The triangular constellation of the LISA mission is dynamic, requiring a constant fine-tuning related to the pointing of the laser links between the spacecraft and a simultaneous refocusing of the telescope. The noise sources related to the laser links expect to provide a dominant contribution to the LISA performance. An update and extension of the LISA science simulation software are needed to assess the hardware development for LISA at Nikhef, TNO, and SRON. A position is therefore available for a master student to study the impact of instrumental noise on the performance of LISA. Realistic simulations based on hardware (noise) characterization measurements performed at TNO will be carried out and compared to the expected tantalizing gravitational wave sources.
Contact: Niels van Bakel,Ernst-Jan Buis
Detector R&D: Spectral X-ray imaging - Looking at colours the eyes can't see
When a conventional X-ray image is taken, one acquires an image that only shows intensities. a ‘black and white’ image. Most of the information carried by the photon energy is lost. Lacking spectral information can result in an ambiguity between material composition and amount of material in the sample. If the X-ray intensity as a function of the energy can be measured (i.e. a ‘colour’ X-ray image) more information can be obtained from a sample. This translates to less required dose and/or to a better understanding of the sample that is being investigated. For example, two fields that can benefit from spectral X-ray imaging are mammography and real time CT.
Detectors using Medipix3 chips are used for X-ray imaging. Such a detector is composed of a pixel chip with a semiconductor sensor bonded on top of it. Photoelectric absorption of X-rays in the sensor results in an amount of charge being released that is proportional to the X-ray energy. This charge is registered by a pixel. Depending on configuration, in each pixel 1, 2, 4 or 8 detection thresholds can be set and so, a number of energy bins can be defined. One of the challenges is to maximise X-ray image quality by minimising effects caused by dispersion in the sensitivity of the pixels. The effects of this dispersion can partly be compensated by applying a specific measurement method in combination with image post processing.
You can work on improving measurement methods and on improving post processing methods. There is flexibility of the planned work depending on the skillset you have. The aim is to get the best X-ray energy resolution over the entire pixel chip. This in turn improves image quality and therefore X-ray CT reconstruction quality.
Important note: Much of this work is to be performed in the laboratory. For as long as corona safety measures are active, the labs at Nikhef are not accessible for students and this project cannot be worked on except for post-processing in software. Currently we hope that the situation will have improved by August. Please see the following videos for examples of our work:
Contact: Martin Fransen,Navrit Bal
Detector R&D: Holographic projector
A difficulty in projecting holograms (based on the interference of light) is the required dense pixel pitch of a projector. One would need a pixel pitch of less than 200 nanometer. With larger pixels artefacts occur due to spatial under sampling. A pixel pitch of 200 nanometer is difficult, if not, impossible, to achieve, especially for larger areas. Another challenge is the massive amount of computing power that would be required to control such a dense pixel matrix.
A new holographic projection method has been developed that reduces under sampling artefacts for projectors with a ‘low’ pixel density. It uses 'pixels' at random but known positions, resulting in an array of (coherent) light points that lacks (or has suppressed) spatial periodicity. As a result a holographic projector can be built with a significantly lower pixel density and correspondingly less required computing power. This could bring holography in reach for many applications like display, lithography, 3D printing, metrology, etc...
Of course, nothing comes for free: With less pixels, holograms become noisier and the contrast will be reduced (not all light ends up in the hologram). The questions: How does the quality of a hologram depend on pixel density? How do we determine projector requirements based on requirements for hologram quality?
Requirements for a hologram can be expressed in terms of: Noise, contrast, resolution, suppression of under sampling artefacts, etc..
For this project we have built a proof of concept holographic emitter. This set-up will be used to verify simulation results (and also to project some cool holograms of course ;-).
Examples of what you could be working on:
a. Calibration/characterisation of the current projector and compensation of systematic errors.
b. To realize a phased array of randomly placed light sources the pixel matrix of the projector must be ‘relayed’ onto a mask with apertures at random but precisely known positions. Determine the best possible relaying optics and design an optimized mask accordingly. Factors like deformation of the projected pixel matrix and limitations in resolving power of the lens system must be taken into account for mask design.
Important note: Much of this work is to be performed in the laboratory. For as long as corona safety measures are active, the labs at Nikhef are not accessible for students and this project cannot be worked on. Currently we hope that the situation will have improved by august.
Contact: Martin Fransen
Theory: The Effective Field Theory Pathway to New Physics at the LHC
A promising framework to parametrise in a robust and model-independent way deviations from the Standard Model (SM) induced by new heavy particles is the Standard Model Effective Field Theory (SMEFT). In this formalism, beyond the SM effects are encapsulated in higher-dimensional operators constructed from SM fields respecting their symmetry properties. In this project, we aim to carry out a global analysis of the SMEFT from high-precision LHC data, including Higgs boson production, flavour observables, and low-energy measurements. This analysis will be carried out in the context of the recently developed SMEFiT approach [1] based on Machine Learning techniques to efficiently explore the complex theory parameter space. The ultimate goal is either to uncover glimpses of new particles or interactions at the LHC, or to derive the most stringent model-independent bounds to date on general theories of New Physics. Of particular interest are novel methods for charting the parameter space [2], the matching to UV-complete theories in explicit BSM scenarios [3], and the interplay between EFT-based model-independent searches for new physics and determinations of the proton structure from LHC data [4].
[1] https://arxiv.org/abs/1901.05965 [2] https://arxiv.org/abs/1906.05296 [3] https://arxiv.org/abs/1908.05588 [4] https://arxiv.org/abs/1905.05215
Contact: Juan Rojo
Theory: Charting the quark and gluon structure of protons and nuclei with Machine Learning
Deepening our knowledge of the partonic content of nucleons and nuclei [1] represents a central endeavour of modern high-energy and nuclear physics, with ramifications in related disciplines such as astroparticle physics. There are two main scientific drivers motivating these investigations of the partonic structure of hadrons. On the one hand, addressing fundamental open issues in our understanding in the strong interactions such as the origin of the nucleon mass, spin, and transverse structure; the presence of heavy quarks in the nucleon wave function; and the possible onset of novel gluon-dominated dynamical regimes. On the other hand, pinning down with the highest possible precision the substructure of nucleons and nuclei is a central component for theoretical predictions in a wide range of experiments, from proton and heavy ion collisions at the Large Hadron Collider to ultra-high energy neutrino interactions at neutrino telescopes. The goal of this project is to exploit Machine Learning and Artificial Intelligence tools [2,3] (neural networks trained by stochastic gradient descent) to pin down the quark and gluon substructure of protons and nuclei by using recent measurements from proton-proton and proton-lead collisions at the LHC. Topics of special interest are i) the strange content of protons and nuclei, ii) parton distributions at higher-orders in the QCD couplings for precision Higgs physics, iii) the interplay between jet, photon, and top quark production data to pin down the large-x gluon, and iv) charm quarks as a probe of gluon shadowing at small-x. The project also involves developing projects for the Electron-Ion Collider (EIC), a new lepton-nucleus experiment to start operations in the next years.
[1] https://arxiv.org/abs/1910.03408 [2] https://arxiv.org/abs/1904.00018 [3] https://arxiv.org/abs/1706.00428
Contact: Juan Rojo