Difference between revisions of "Last years MSc Projects"

From Education Wiki
Jump to navigation Jump to search
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
== 2022 ==
 +
 +
=== ALICE: The next-generation multi-purpose detector at the LHC ===
 +
This main goal of this project is to focus on the next-generation multi-purpose detector planned to be built at the LHC. Its core will be a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X0 per layer, with the innermost layers possibly positioned inside the beam pipe. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou] and [mailto:Alessandro.Grelli@cern.ch Alessandro Grelli] and [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen]''
 +
 +
=== ALICE: Searching for the strongest magnetic field in nature ===
 +
In a non-central collision between two Pb ions, with a large value of impact parameter, the charged nucleons that do not participate in the interaction (called spectators) create strong magnetic fields. A back of the envelope calculation using the Biot-Savart law brings the magnitude of this filed close to 10^19Gauss in agreement with state of the art theoretical calculation, making it the strongest magnetic field in nature. The presence of this field could have direct implications in the motion of final state particles. The magnetic field, however, decays rapidly. The decay rate depends on the electric conductivity of the medium which is experimentally poorly constrained. Overall, the presence of the magnetic field, the main goal of this project, is so far not confirmed experimentally.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
 +
 +
=== ALICE: Looking for parity violating effects in strong interactions ===
 +
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions, in the presence of a deconfined state, gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, what is called the Chiral Magnetic Effect (CME).
 +
The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, however further studies are needed to constrain background effects. These highly anticipated results have the potential to reveal exiting, new physics.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
 +
 +
=== ALICE: Machine learning techniques as a tool to study the production of heavy flavour particles ===
 +
There was recently a shift in the field of heavy-ion physics triggered by experimental results obtained in collisions between small systems (e.g. protons on protons). These results resemble the ones obtained in collisions between heavy ions. This consequently raises the question of whether we create the smallest QGP droplet in collisions between small systems. The main objective of this project will be to study the production of charm particles such as D-mesons and Λc-baryons in pp collisions at the LHC. This will be done with the help of a new and innovative technique which is based on machine learning (ML). The student will also extend the studies to investigate how this production rate depends on the event activity e.g. on how many particles are created after every collision.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou] and [mailto:Alessandro.Grelli@cern.ch Alessandro Grelli]''
 +
 +
===ATLAS: The Higgs boson's self-coupling===
 +
 +
The coupling of the Higgs boson to itself is one of the main unobserved interactions of the Standard Model and its observation is crucial to understand the shape of the Higgs potential. Here we propose to study the 'ttHH' final state: two top quarks and two Higgs bosons produced in a single collision. This topology is yet unexplored at the ATLAS experiment and the project consists of setting up the new analysis (including multivariate analysis techniques to recognise the complicated final state), optimising the sensitivity and including the result in the full ATLAS study of the Higgs boson's coupling to itself. With the LHC data from the upcoming Run-3, we might be able to see its first glimpses!
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree]''
 +
 +
===ATLAS: The Next Generation===
 +
 +
After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays) and advanced analysis techiques (using deep learning methods).
 +
 +
[https://atlas.cern/updates/briefing/charming-Higgs-decay][https://arxiv.org/abs/1802.04329 https://atlas.cern/updates/briefing/charming-Higgs-decay]
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree]''
 +
 +
===ATLAS: Searching for new particles in very energetic diboson production===
 +
 +
The discovery of new phenomena in high-energy proton–proton collisions is one of the main goals of the Large Hadron Collider (LHC). New heavy particles decaying into a pair of vector bosons (WW, WZ, ZZ) are predicted in several extensions to the Standard Model (e.g. extended gauge-symmetry models, Grand Unified theories, theories with warped extra dimensions, etc). In this project we will investigate new ideas to look for these resonances in a region that is yet unexplored in the data. We will focus on the final states where both vector bosons decay into quarks as they are expected to bring the highest sensitivity [1]. We will try to reconstruct and exploit new ways to identify vector bosons (using machine learning methods) and then tackle the problem of estimating contributions from beyond the Standard Model processes in the tails of the mass distribution.
 +
 +
[1] https://arxiv.org/abs/1906.08589
 +
 +
''Contact: [mailto:f.dias@nikhef.nl Flavia de Almeida Dias]''
 +
 +
===ATLAS top-quark and Higgs-boson analysis combination, and Effective Field Theory interpretation===
 +
 +
We are looking for a master student with interest in theory and data-analysis in the search for physics beyond the Standard Model in the top-quark and Higgs-boson sectors.
 +
 +
Your master-project starts just at the right time for preparing the Run-3 analysis of the ATLAS experiment at the LHC.  In Run-3 (2022-2026), three times more data becomes available, enabling analysis of rare processes with innovative software tools and techniques.
 +
 +
This project aims to explore the newest strategy to combine the top-quark and Higgs-boson measurements in the perspective of constraining the existence of new physics beyond the Standard Model (SM) of Particle Physics.  We selected the pp->tZq and gg->HZ processes as promising candidates for a combination to constrain new physics  in the context of  Standard Model Effective Field Theory (SMEFT).  SMEFT is the state-of-the-art framework for theoretical interpretation of LHC data. In particular, you will study the SMEFT OtZ and Ophit operators, which are not well constrained by current measurements.
 +
 +
Besides affinity with particle physics theory, the ideal candidate for this project has developed python/C++ skills and is eager to learn advanced techniques. You start with a simulation of the signal and background samples using existing software tools. Then, an event selection study is required using Machine Learning techniques. To evaluate the SMEFT effects, a fitting procedure based on the innovative  Morphing technique is foreseen, for which the basic tools in the ROOT and RooFit framework are available. The work is carried out in the ATLAS group at Nikhef and may lead to an ATLAS note.
 +
 +
''Contact: [mailto:geoffrey.gilles@cern.ch> Geoffrey Gilles] and [mailto:verkerke@nikhef.nl Wouter Verkerke] and [mailto:h73@nikhef.nl Marcel Vreeswijk]''
 +
 +
=== ATLAS Machine learning to enhance reconstruction of very rare Higgs decays ===
 +
Since the Higgs boson discovery in 2012 at the ATLAS experiment, the investigation of the properties of the Higgs boson has been a priority for research at the Large Hadron Collider (LHC). However, there are still a many open questions: Is the Higgs boson the only origin of Electroweak Symmetry Breaking? Is there a mechanism which can explain the observed mass pattern of SM particles? Many of these questions are linked to the Higgs boson coupling structure.
 +
 +
While the Higgs boson coupling to fermions of the third generation has been clearly, the investigation of the Higgs boson coupling to the light fermions of the second generation will be a major project for the upcoming data-taking period starting this year. The Higgs boson decay to muons is most sensitive channel to establish a coupling of the Higgs boson to second generation fermions. In this project you will work on an improvement of the H-->mumu search: In about 5% of the events, a photon is radiated off the outgoing muons. By recognizing these photons and taking their effect into account we can improve the reconstruct these events better. For this project we will use machine learning to best identify these special events and to take their energy contribution into account to improve the overall sensitivity.
 +
 +
''Contact: [mailto:oliver.rieger@nikhef.nl Oliver Rieger] and [mailto:verkerke@nikhef.nl Wouter Verkerke] and [mailto:s01@nikhef.nl Peter Kluit]''
 +
 +
=== ATLAS: Scrutinising Higgs decaying into W bosons ===
 +
Observation of the Higgs boson happened 10 years ago and since then scientists’ interest has shifted towards measuring precisely its properties. An example is a coupling strength telling us how does the Higgs boson interact with different particles such as W bosons. Measuring H→ WW →lnu lnu process allows us to not only probe the Standard Model (SM), by measuring the coupling strength or indirectly probe Higgs boson width, but also test against the theories beyond (for instance in the context of the effective field theory framework).
 +
 +
The student will take active part in the ATLAS HWW group. There are multiple possible areas of contribution within the group depending on the interest of the student. For instance, utilising machine learning techniques to optimise for the selection of HWW signal process, determining the fake background processes, interpreting the results through the beyond SM theories and others.
 +
Contact:  ''[mailto:mvozak@cern.ch Matouš Vozák] and [mailto:Ivo.van.Vulpen@nikhef.nl Ivo van Vulpen]''
 +
=== ATLAS: HGTD detector ===
 +
The ATLAS is going to get a new ability:  a Timing Layer. This allows us to reconstruct tracks not only in the 3 dimensions of space but adds the ability of measuring very precisely also the time (at picosecond level) at which the particles pass the sensitive layers of the HGTD detector. This allow to construct the trajectories of the particles created at the LHC in 4 dimensions and ultimately will lead to a better reconstruction of physics at ATLAS. The new HGTD detector is still in construction and work needs to be done on different levels such as understanding the detector response (taking measurements in the lab and performing simulations) or developing algorithms to reconstruct the particle trajectories (programming and analysis work). With this work you will be part of the Atlas group and/or the Fast Timing detector group together with the R&D department at Nikhef.
 +
 +
Contact me to discuss the possibilities. 
 +
Contact:  ''[mailto:hella.snoek@nikhef.nl Hella Snoek]''
 +
=== Dark Matter: Building better Dark Matter Detectors - the XAMS  R&D Setup===
 +
The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 0.5kg of ultra-pure liquid xenon in the central volume. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matter experiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data themselves You will "own" this experiment.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
===Dark Matter: Searching for Dark Matter Particles - XENONnT Data Analysis ===
 +
The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently operating the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the new data coming from the XENONnT detector. The work will consist of understanding the detector signals and applying a deep neural network  to improve the (gas-) background discrimination in our Python-based analysis tool to improve the sensitivity for low-mass dark matter particles. The work will continue a study started by a recent graduate.  There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
===Dark Matter: The Ultimate Dark Matter Experiment - DARWIN Sensitivity Studies===
 +
DARWIN is the “ultimate” direct detection dark matter experiment, with the goal to reach the so-called “neutrino floor”, when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2027, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN. We are also working on a “fast simulation” that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills.
 +
 +
''Contact: [mailto:t.pollmann@nikhef.nl Tina Pollmann], [mailto:decowski@nikhef.nl Patrick Decowski] or [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
===Dark Matter: Sensitive tests of wavelength-shifting properties of materials for dark matter detectors===
 +
Rare event search experiments that look for neutrino and dark matter interactions are performed with highly sensitive detector systems, often relying on scintillators, especially liquid noble gases, to detect particle interactions. Detectors consist of structural materials that are assumed to be optically passive, and light detection systems that use reflectors, light detectors, and sometimes, wavelength-shifting materials. MSc theses are available related to measuring the efficiency of light detection systems that might be used in future detectors. Furthermore, measurements to ensure that presumably passive materials do not fluoresce, at the low level relevant to the detectors, can be done. Part of the thesis work can include Monte Carlo simulations and data analysis for current and upcoming dark matter detectors, to study the effect of different levels of desired and nuisance wavelength shifting. In this project, students will acquire skills in photon detection, wavelength shifting technologies, vacuum systems, UV and extreme-UV optics, detector design, and optionally in Python and C++ programming, data analysis, and Monte Carlo techniques.
 +
 +
''Contact: [mailto:Tina.Pollmann@tum.de Tina Pollmann] and [mailto:decowski@nikhef.nl Patrick Decowski]''
 +
=== Detector R&D: Time resolution of ultrathin monolithic timing detectors ===
 +
For the upgrade of ALICE and LHCb vertex detectors, new silicon pixel detectors are being developed now that can register the passing particles with a time precision of tens of picoseconds. ALICE is the first experiment at the LHC to have installed monolithic sensors where electronics is integrated into the sensor. New prototypes of their sensors have arrived at Nikhef. New prototypes of other sensors able to withstand very high radiation fluences of the LHC are arriving soon. In this project, you will tackle the challenge to accurately measure the time resolution of one of these sensors with our laser setups in the laboratory. You will have the chance to work in an international collaboration where you will report about the performance of these novel sensors. There may even be an opportunity to join beam tests at CERN. For this project, we are looking for someone who is interested to work with high-tech sensors and equipment in our Nikhef laboratory and with python programming skills.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
=== Detector R&D: Performance of monolithic sensors for the ALICE upgrade from test beam data ===
 +
For the upgrade of the ALICE detector, ultrathin picosecond timing integrated sensors are being developed now, of which the first prototypes are now at Nikhef and are being studied in test beams at CERN and DESY in Hamburg. Sensors are studied with the ALPIDE (ALICE PIxel DEtector) telescope that uses the same sensors that have recently installed in the heart of the ALICE experiment at CERN. In this project, you will analyze data from beam tests to measure the efficiency and time resolution of the new prototypes for the ALICE upgrade with the latest data from test beams at CERN. If the travel situation allows, you will have the opportunity to join the ALICE test beam group at CERN or in Hamburg at DESY to take part in the exciting experience of taking real data. We are looking for someone with good programming and data analysis skills.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
=== Detector R&D: Modeling radiation damage in silicon sensors ===
 +
In the coming years, the ATLAS experiment at the LHC works on upgrades to prepare for the high-luminosity LHC, where many more collisions will take place than today. Both analysis of data and decisions made in preparation of these detectors and on data taking heavily rely on simulations, especially those that model the damage done to sensors after many collisions. It may sound counterintuitive, but particle detectors do not actually like particles: after many collisions at the LHC, a silicon pixel detector has seen so many particles that its bulk gathers defects. Charge generated by traversing particles can get trapped in defects resulting in less charge induced in the readout electrodes, reducing detector performance in resolution and efficiency. In this project, you will be a member of the international ATLAS collaboration where you will compare different models of radiation damage with measured data. You will learn technology computer aided design (TCAD), widely used in industry, and contribute to the open source program Allpix Squared that is widely used for simulations in many areas of particle physics. Here we are looking for someone with good programming and data analysis skills who would like to contribute to upgrades of collider experiments.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
=== Detector R&D: Fast trigger ===
 +
Muons in cosmic rays are for free! In this project we are not looking for where cosmic rays come from or what physics can be studied with them. Instead, we are using them to test some of our particle detectors. Muons are short lived particles that carry the same charge as electrons, have a high penetrating power and can be detected relatively easy. In practice a test set-up consists of a ‘trigger’ and a device under test. The ‘trigger’ is a detector that gives a signal when a muon passes by, which is a signal to check the result in the device under test. Did the device under test respond to the muon in the expected way?
 +
 +
For the planned upgrades of particle detectors at CERN, for LHC experiments (LHCb, ATLAS, ALICE, CMS), new particle detectors are under development. Some of these new detectors must be able to measure within tens of ps (10e-12 s) precise when a particle was detected.
 +
 +
To facilitate testing these new detectors by using muons we need a trigger set up with a matching precision in timing (order tens of ps). We want to investigate several potentially interesting technologies to develop such a fast trigger. In one scenario the trigger could be based on the use of Cherenkov light. Cherenkov light is generated when a charged particle traverses a medium faster than the speed of light in that medium. This light can be generated in for example plexiglass, which in turn can be mounted on top of a light sensor. In our case the light sensor could be a so called silicon photo multiplier, which is capable of detecting only a few photons and gives a signal within a few hundred ps.  Another possible scenario would be to use a so called LGAD (Low Gain Avalanche Diode) to measure the signal that a muon generates as it traverses the sensor.
 +
 +
The Question(s): Which technology should we use for a fast trigger and what is the best timing precision that we can achieve?
 +
 +
This project will involve a lot of 'hands on work' in the lab.
 +
 +
''Contact: [mailto:martinfr@nikhef.nl Martin Fransen] and [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
=== Detector R&D: Characterisation of Trench Isolated Low Gain Avalanche Detectors (TI-LGAD) ===
 +
The future vertex detector of the LHCb Experiment needs to measure the spatial coordinates and time of the particles originating in the LHC proton-proton collisions with resolutions better than 10 um and 50 ps, respectively. Several technologies are being considered to achieve these resolutions. Among those is a novel sensor technology called Trench Isolated Low Gain Avalanche Detector. Prototype pixelated sensors have been manufactured recently and have to be characterised. Therefore these new sensors will be bump bonded to a Timepix4 ASIC which provides charge and time measurements in each of 230 thousand pixels. Characterisation will be done using a lab setup at Nikhef, and includes tests with a micro-focused laser beam, radioactive sources, and possibly with particle tracks obtained in a test-beam. This project involves data taking with these new devices and analysing the data to determine the performance parameters such as the spatial and temporal resolution. as function of temperature and other operational conditions.
 +
 +
''Contacts: [mailto:kazu.akiba@nikhef.nl Kazu Akiba] and [mailto:martinb@nikhef.nl Martin van Beuzekom]''
 +
 +
=== Detector R&D: Simulation of 3D silicon sensors ===
 +
For the upgrade of the vertex detector of the LHCb experiment novel silicon pixel detectors have to be developed that can register the passing particles with a time precision of tens of picoseconds. Given the harsh radiation environment very close to the LHCb interaction point only a limited number of technologies can be applied. One of the most promising technologies are the so-called 3D sensors whose readout electrodes are pillars that are placed into the sensor perpendicular to the surface; this in contrast to ’standard’ planar silicon sensors where the pixel electrodes are at the surface, similar to the camera in your smartphone. To understand the time response of these 3D sensors, simulations with TCAD software have to be performed and the results will be compared to measured data. These simulations involve the creation/adaptation of the 3D structures of the model, optimising the simulation speed, and analysing the signals as function voltage, track impact point and deposited charge.  Hands-on experience with such 3D sensors in the R&D labs at Nikhef is planned within the scope of this project.
 +
 +
''Contacts: [mailto:martinb@nikhef.nl Martin van Beuzekom] and [mailto:kazu.akiba@nikhef.nl Kazu Akiba]''
 +
 +
===Detector R&D: Laser Interferometer Space Antenna (LISA) - Wavefront sensors for gravitational wave detection ===
 +
 +
The space-based gravitational wave antenna LISA is one of the most challenging space missions ever proposed. ESA plans to launch around 2034 three spacecraft separated by a few million kilometres. This constellation measures tiny variations in the distances between test-masses located in each satellite to detect gravitational waves from sources such as supermassive black holes. LISA is based on laser interferometry, and the three satellites form a giant Michelson interferometer. LISA measures a relative phase shift between one local laser and one distant laser by light interference. The phase shift measurement requires sensitive wavefront sensors. The Nikhef DR&D group fabricated prototype sensors in 2020 together with the Photonics industry and the Dutch institute for space research SRON. Nikhef & SRON are responsible for the Quadrant PhotoReceiver (QPR) system: the sensors, the housing including a complex mount to align the sensors with 10's of nanometer accuracy, various environmental tests at the European Space Research and Technology Centre (ESTEC), and the overall performance of the QPR in the LISA instrument. Currently we are discussing possible sensor improvements for a second fabrication run in 2022, optimizing the mechanics and preparing environmental tests. As a MSc student, you will work on various aspects of the wavefront sensor development: study the performance of the epitaxial stacks of Indium-Gallium-Arsenide, setting up test benches to characterize the sensors and QPR system, performing the actual tests and data analysis, in combination with performance studies and simulations of the LISA instrument.
 +
 +
''Contact: [mailto:nielsvb@nikhef.nl Niels van Bakel]''
 +
 +
===FCC: The Next Collider===
 +
 +
After the LHC, the next planned large collider at CERN is the proposed 100 kilometer circular collider "FCC". In the first stage of the project, as a high-luminosity electron-positron collider, precision measurements of the Higgs boson are the main goal. One of the channels that will improve by orders of magnitude at this new accelerator is the decay of the Higgs boson to a pair of charm quarks. This project will estimate a projected sensitivity for the coupling of the Higgs boson to second generation quarks, and in particular target the improved reconstruction of the topology of long-lived mesons in the clean environment of a precision e+e- machine.
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree]''
 +
 +
===LHCb: New physics in the angular distributions of B decays to K*ee===
 +
 +
Lepton flavour violation in B decays can be explained by a variety of non-standard model interactions. Angular distributions in decays of a B meson to a hadron and two leptons are an important source of information to understand which model is correct. Previous analyses at the LHCb experiment have considered final states with a pair of muons. Our LHCb group at Nikhef concentrates on a new measurement of angular distributions in decays with two electrons. The main challenge in this measurement is the calibration of the detection efficiency. In this project you will confront estimates of the detection efficiency derived from simulation with decay distributions in a well known B decay. Once the calibration is understood, the very first analysis of the angular distributions in the electron final state can be performed.
 +
 +
Contact:  [mailto:m.senghi.soares@nikhef.nl Mara Soares] and [mailto:wouterh@nikhef.nl Wouter Hulsbergen]
 +
 +
===LHCb: Discovering heavy neutrinos in B decays===
 +
 +
Neutrinos are the lightest of all fermions in the standard model. Mechanisms to explain their small mass rely on the introduction of new, much heavier, neutral leptons. If the mass of these new neutrinos is below the b-quark mass, they can be observed in B hadron decays.
 +
 +
In this project we search for the decay of B+ mesons in into an ordinary electron or muon and the yet undiscovered heavy neutrino. The heavy neutrino is expected to be unstable and in turn decay quickly into a charged pion and another electron or muon. The final state in which the two leptons differ in flavour, "B+ to e mu pi", is particularly interesting: It is forbidden in the standard model, such that backgrounds are small. The analysis will be performed within the LHCb group at Nikhef using LHCb run-2 data.
 +
 +
''Contact: [mailto:v.lukashenko@nikhef.nl Lera Lukashenko] and''  [mailto:wouterh@nikhef.nl Wouter Hulsbergen]
 +
===LHCb: The exotic 4-quark state X(3872) in exclusive production===
 +
The nature of the X(3872) is still unknown. Is it a regular charmonium with an unexpected mass, a compact 4-quark state, or a DD molecule? Or a quantum superposition of all that? Either way, finding out will tell us something about how quark organise in hadrons and colour confinement. The project is to measure a very peculiar production mode: pp->Xpp. Only the X is seen in the detector and nothing else. Data from LHCb run 2 will be used and the analysis will build on previous work.
 +
 +
''Contact: [mailto:patrick.koppenburg@cern.ch Patrick Koppenburg]''
 +
 +
===LHCb: Scintillating Fibre tracker software===
 +
The installation of the scintillating-fibre tracker in LHCb’s underground cavern was recently completed. This detector uses 10000 km of fibres to track particle trajectories in the LHCb detector when the LHC starts up again later this year. The light emitted by the scintillating fibres when a particle interacts with them is measured using photon multiplier tubes. The studies proposed for this project will focus on software, and could include writing a framework to monitor the detector output, improving the detector simulation or working on the data processing.
 +
 +
''Contact: [mailto:e.gabriel@nikhef.nl Emmy Gabriel]''
 +
 +
===LHCb: Vertex detector calibration===
 +
In summer 2022 LHCb has started data taking will an almost entirely new detector. At the point closest to the interaction point, the trajectories of charge particles are reconstructed with a so-called silicon pixel detector. The design hit resolution of this detector is about 15 micron. However, to actually reach this resolution a precise calibration of the spatial positions of the silicon sensors needs to be performed. In this project, you will use the first data of the new LHCb detector to perform this calibration and measure the detector performance.
 +
 +
''Contact: [mailto:wouterh@nikhef.nl Wouter Hulsbergen]''
 +
 +
===LHCb: Search for light dark particles===
 +
The Standard Model of elementary particles does not contain a proper Dark Matter candidate. One of the most tantalizing theoretical developments is the so-called ''Hidden Valley models'': a mirror-like copy of the ''Standard Model'', with dark particles that communicate with standard ones via a very feeble interaction. These models predict the existence of ''dark hadrons'' – composite particles that are bound similarly to ordinary hadrons in the ''Standard Model''. Such ''dark hadrons'' can be abundantly produced in high-energy proton-proton collisions, making the LHC a unique place to search for them. Some ''dark hadrons'' are stable like a proton, which makes them excellent ''Dark Matter'' candidates, while others decay to ordinary particles after flying a certain distance in the collider experiment. The LHCb detector has a unique capability to identify such decays, particularly if the new particles have a mass below ten times the proton mass.
 +
 +
This project assumes a unique search for light ''dark hadrons'' that covers a mass range not accessible to other experiments. It assumes an interesting program on data analysis (python-based) with non-trivial machine learning solutions and phenomenology research using fast simulation framework. Depending on the interest, there is quite a bit of flexibility in the precise focus of the project.
 +
 +
''Contact: [mailto:andrii.usachov@nikhef.nl Andrii Usachov]''
 +
 +
===LHCb: Measuring new decays with excited Ds states in semileptonic Bs decays===
 +
One of the most striking discrepancies between the Standard Model and measurements are the lepton flavour universality (LFU) measurements with tau decays. At the moment, we have observed an excess of 3-4 sigma in ''B → Dτν'' decays. This could point even to a new force of nature! To understand this discrepancy, we need to make further measurements.
 +
 +
There are two very exciting (pun intended) projects to verify these discrepancies. These involve measuring the ''B<sub>s</sub> → D<sub>s2</sub><sup>*</sup>τν'' and/or ''B<sub>s</sub> → D<sub>s1</sub><sup>*</sup>τν'' decays. These decays with excited states of the ''D<sub>s</sub>'' meson have not been observed before, and have a unique way of coupling to potential new physics candidates that can only be measured in ''B<sub>s</sub>'' decays [1].
 +
 +
Another measurement with excited ''D<sub>s</sub>'' mesons is the decay of ''B<sub>s</sub> → D<sub>s</sub>(2317)μν'', which has also never been observed before. The ''D<sub>s</sub>(2317)'' meson is much lighter than it should be according to the theoretical predictions, raising the question if it is actually a molecular state or perhaps a tetraquark. By measuring this semileptonic decay, we can shed some light on its structure [1,2].
 +
 +
[1] https://arxiv.org/abs/1606.09300
 +
 +
[2] https://arxiv.org/abs/1501.03422
 +
 +
''Contact: [mailto:suzannek@nikhef.nl Suzanne Klaver]''
 +
 +
===Neutrinos: Neutrino scattering: the ultimate resolution===
 +
 +
Neutrino telescopes like IceCube and KM3NeT aim at detecting neutrinos from cosmic sources. The neutrinos are detected with the best resolution when charged current interactions with nucleons produce a muon, which can be detected with high accuracy (depending on the detector). A crucial ingredient in the ultimate achievable pointing accuracy of neutrino telescopes is the scattering angle between the neutrino and the muon. While published computations have investigated the cross-section of the process in great detail, this important scattering angle has not received much attention. The aim of the project is to compute and characterize the distribution of this angle, and that the ultimate resolution of a neutrino telescope. If successful, the results of this project can lead to publication of interest to the neutrino telescope community.
 +
 +
Depending on your interests, the study could be based on a first-principles calculation (using the deep-inelastic scattering formalism), include state-of-the-art parton distribution functions, and/or exploit existing event-generation software for a more experimental approach.
 +
 +
''Contacts: [mailto:aart.heijboer@nikhef.nl Aart Heijboer]''
 +
 +
===Neutrinos: acoustic detection of ultra-high energy neutrinos===
 +
 +
The study of the cosmic neutrinos of energies above 1017 eV, the so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent astrophysical sources, such as gamma ray bursts, supernovae or even dark matter. In addition, the observation of high energy neutrinos may provide a unique tool to study interactions at high energies. The energy deposition of these extreme neutrinos in water induce a thermo-acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope.
 +
 +
The work will be executed at the Nikhef institute and/or the TNO laboratories in Delft. In this project master students have the opportunity to contribute in the following ways:
 +
 +
'''Project 1:''' Hardware development on fiber optics hydrophones technology Goal: characterize existing prototype optical fibre hydrophones in an anechoic basin at TNO laboratory. Data collection, calibration, characterization, analysis of consequences for design future acoustic hydrophone neutrino telescopes;
 +
Keywords: Optical fiber technology, signal processing, electronics, lab.
 +
 +
'''Project 2:''' Investigation of ultra-high energy neutrinos and their interactions with matter. Goal: Discriminate the neutrino signals from the background noises, in particular clicks from whales and dolphins in the deep sea. Study impact on physics reach for future acoustic hydrophone neutrino telescopes;
 +
Keywords: Monte Carlo simulations, particle physics, neutrino physics, data analysis algorithms.
 +
 +
Further information: Info on ultra-high energy neutrinos can be found at: http://arxiv.org/abs/1102.3591; Info on acoustic detection of neutrinos can be found at: http://arxiv.org/abs/1311.7588
 +
 +
''Contact: [mailto:ernst-jan.buis@tno.nl Ernst Jan Buis]'' or ''[mailto:ivo.van.vulpen@nikhef.nl Ivo van Vulpen]''
 +
 +
===Neutrinos: Oscillation analysis with the first data of KM3NeT===
 +
 +
The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In this project the available data will be used together with simulations to best reconstruct the event topologies and optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector. The data will then be used to measure neutrino oscillation parameters, and prepare for a future neutrino mass ordering determination.
 +
 +
Programming skills are essential, mostly root and C++ will be used.
 +
''Contact: [mailto:bruijn@nikhef.nl Ronald Bruijn] [mailto:h26@nikhef.nl Paul de Jong]''
 +
 +
 +
===Neutrinos: the Deep Underground Neutrino Experiment (DUNE)===
 +
 +
The Deep Underground Neutrino Experiment (DUNE) is under construction in the USA, and will consist of a powerful neutrino beam originating at Fermilab, a near detector at Fermilab, and a far detector in the SURF facility in Lead, South Dakota, 1300 km away. During travelling, neutrinos oscillate and a fraction of the neutrino beam changes flavour; DUNE will determine the neutrino oscillation parameters to unrivaled precision, and try and make a first detection of CP-violation in neutrinos. In this project, various elements of DUNE can be studied, including the neutrino oscillation fit, neutrino physics with the near detector, event reconstruction and classification (including machine learning), or elements of data selection and triggering.
 +
 +
''Contact: [mailto:h26@nikhef.nl Paul de Jong]''
 +
 +
===Neutrinos: Searching for Majorana Neutrinos with KamLAND-Zen===
 +
The KamLAND-Zen experiment, located in the Kamioka mine in Japan, is a large liquid scintillator experiment with 750kg of ultra-pure Xe-136 to search for neutrinoless double-beta decay (0n2b). The observation of the 0n2b process would be evidence for lepton number violation and the Majorana nature of neutrinos, i.e. that neutrinos are their own anti-particles. Current limits on this extraordinary rare hypothetical decay process are presented as a half-life, with a lower limit of 10^26 years. KamLAND-Zen, the world’s most sensitive 0n2b experiment, is currently taking data and there is an opportunity to work on the data analysis, analyzing data with the possibility of taking part in a ground-breaking discovery. The main focus will be on developing new techniques to filter the spallation backgrounds, i.e.  the production of radioactive isotopes by passing muons. There will be close collaboration with groups in the US (MIT, Berkeley, UW) and Japan (Tohoku Univ).
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski]''
 +
 +
=== Cosmic Rays/Neutrinos: Seasonal muon flux variations and the pion/kaon ratio ===
 +
The KM3NeT ARCA and ORCA detectors, located kilometers deep in the Mediterranean Sea, have neutrinos as primary probes. Muons from cosmic ray interactions reach the detectors in relatively large quantities too. These muons, exploiting the capabilities and location of the detectors allow the study of cosmic rays and their interactions. In this way, questions about their origin, type, propagation can be addressed. In particular these muons are tracers of hadronic interactions at energies inaccessible at particle accelerators.
 +
 +
The muons reaching the depths of the detectors result from decays of mesons, mostly pions and kaons, created in interactions of high-energy cosmic rays with atoms in the upper atmosphere. Seasonal changes of the temperature – and thus density - profile of  the atmosphere modulate the balance between the probability for these mesons to decay (producing muons) or to re-interact. Pions and kaons are affected differently, allowing to extract their production ratio by determining how changes in muon rate depend on changes in the effective temperature – an integral over the atmospheric temperature profile weighted by a depth dependent meson production rate.
 +
 +
In this project, the aim is to measure the rate of muons in the detectors and  to calculate the effective temperature above the KM3NeT detectors from atmospheric data, both as function of time. The relation between these two can be used to extract the pion to kaon ratio.
 +
 +
''Contact: [mailto:rbruijn@nikhef.nl Ronald Bruijn]''
 +
 +
===Gravitational Waves: Computer modelling to design the laser interferometers for the Einstein telescope===
 +
 +
A new field of instrument science led to the successful detection of gravitational waves by the LIGO detectors in 2015. We are now preparing the next generation of gravitational wave observatories, such as the Einstein Telescope, with the aim to increase the detector sensitivity by a factor of ten, which would allow, for example, to detect stellar-mass black holes from early in the universe when the first stars began to form. This ambitious goal requires us to find ways to significantly improve the best laser interferometers in the world.
 +
 +
Gravitational wave detectors, such as LIGO and VIRGO, are complex Michelson-type interferometers enhanced with optical cavities. We develop and use numerical models to study these laser interferometers, to invent new optical techniques and to quantify their performance. For example, we synthesize virtual mirror surfaces to study the effects of higher-order optical modes in the interferometers, and we use opto-mechanical models to test schemes for suppressing quantum fluctuations of the light field. We can offer several projects based on numerical modelling of laser interferometers. All projects will be directly linked to the ongoing design of the Einstein Telescope.
 +
 +
''Contact: [mailto:a.freise@nikhef.nl Andreas Freise]''
 +
 +
=== Theory: Effective Field Theories of Particle Physics from low- to high-energies===
 +
Known elementary matter particles exhibit a surprising three-fold structure. The particles belonging to each of these three “generations” seem to display a remarkable pattern of identical properties, yet have vastly different masses. This puzzling pattern is unexplained. Equally unexplained is the bewildering imbalance between matter and anti-matter observed in the universe, despite minimal differences in the properties of particles and anti-particles. These two mystifying phenomena may originate from a deeper, still unknown, fundamental structure characterised by novel types of particles and interactions, whose unveiling would revolutionise our understanding of nature. Until recently, it was widely assumed that matter particles from each of the three generations interact with the same (“universal”) strength. This hypothesis is being challenged by new measurements at the Large Hadron Collider (LHC) at CERN, which hint towards non-universal interactions. If confirmed, these measurements will be the first signs of new particles and interactions in high-energy colliders. These exciting findings indicate the urgent need to explore such phenomena in depth. The ultimate goal of particle physics is uncovering a fundamental theory which allows the coherent interpretation of phenomena taking place at all energy and distance scales. In this project, the students will exploit the Effective Field Theory (EFT) formalism, which allows the theoretical interpretation of particle physics data in terms of new fundamental quantum interactions which relate seemingly disconnected processes. Specifically, the goal is to connect measurements from ATLAS and LHCb among them and to jointly interpret this information with that provided by other experiments, from CMS and Belle-II to very low-energy probes such as the anomalous magnetic moment of the muon or electric dipole moments of the electron and neutron.
 +
 +
This project will be based on theoretical calculations in particle physics, numerical simulations in Python, analysis of existing data from the LHC and other experiments, as well as formal developments in understanding the operator structure of effective field theories. This project accommodates several students, who would work together in developing the main formalism while each of them focuses on a specific sub-project. Depending on the student profile, sub-projects with a strong computational and/or machine learning component are also possible.
 +
 +
'''Subproject #1: SMEFT & Flavour symmetries'''. While the power of the Standard Model EFT (named SMEFT) framework is its generality and lack of assumptions, the number of operators is somewhat daunting. A popular way to trim the number of operators is to assume flavour symmetries that relate operators with different quark and lepton flavours. In this project you will investigate the theoretical basis for commonly-used flavour symmetries and what they imply for the connection between high-energy observables involving third-generation particles (top and bottom quarks and tau leptons) and low-energy precision tests involving first- and second-generation particles.
 +
 +
'''Subproject #2: SMEFT & magnetic moment of the muon'''. The magnetic moment of the muon appears to differ from the Standard Model expectations by a large amount, well beyond the known experimental and theoretical uncertainties. Recent experiments have only strengthened the significance of this anomaly. In this project, the students will investigate the feasibility of implementing the measurement of the magnetic moment of the muon into a global SMEFT analysis, by exploiting recently provided calculations. Special attention will be devoted to the flavour assumptions required to consistently match this measurement with the LHC data. The SMEFiT analysis framework will be used to connect the g-2 data with high-energy LHC measurements.
 +
 +
References: arXiv:2105.00006, <nowiki>https://arxiv.org/abs/1901.05965</nowiki> , <nowiki>https://arxiv.org/abs/1906.05296</nowiki> ,  <nowiki>https://arxiv.org/abs/1908.05588</nowiki>,  <nowiki>https://arxiv.org/abs/1905.05215</nowiki>
 +
 +
''Contacts: [Mailto:j.rojo@vu.nl Juan Rojo], [mailto:K.vos@maastrichtuniversity.nl Keri Vos], [mailto:j.devries4@uva.nl Jordy de Vries]''
 +
 +
===Theory: High-energy neutrino-nucleon interactions at the Forward Physics Facility ===
 +
High-energy collisions at the High-Luminosity Large Hadron Collider (HL-LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing experiments. The proposed Forward Physics Facility (FPF) to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). High statistics neutrino detection will provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. The FPF has the promising potential to probe our understanding of the strong interactions as well as of proton and nuclear structure, providing access to both the very low-x and the very high-x regions of the colliding protons. The former regime is sensitive to novel QCD production mechanisms, such as BFKL effects and non-linear dynamics, as well as the gluon parton distribution function (PDF) down to x=1e-7, well beyond the coverage of other experiments and providing key inputs for astroparticle physics. In addition, the FPF acts as a neutrino-induced deep-inelastic scattering (DIS) experiment with TeV-scale neutrino beams. The resulting measurements of neutrino DIS structure functions represent a valuable handle on the partonic structure of nucleons and nuclei, particularly their quark flavour separation, that is fully complementary to the charged-lepton DIS measurements expected at the upcoming Electron-Ion Collider (EIC).
 +
 +
In this project, the student(s) will carry out updated predictions for the neutrino fluxes expected at the FPF, assess the precision with which neutrino cross-sections will be measured, and quantify their impact on proton and nuclear structure by means of machine learning tools and state-of-the-art calculations in perturbative Quantum Chromodynamics.
 +
 +
References: arXiv:2109.10905, arXiv:2201.12363 , arXiv:2109.02653
 +
 +
''Contacts: [Mailto:j.rojo@vu.nl Juan Rojo]''
 +
 +
===Theory: Probing the origin of the proton spin with machine learning===
 +
At energy-frontier facilities such as the Large Hadron Collider (LHC), scientists study the laws of Nature in their quest for novel phenomena both within and beyond the Standard Model of particle physics. An in-depth understanding of the quark and gluon substructure of protons and heavy nuclei is crucial to address pressing questions from the nature of the Higgs boson to the origin of cosmic neutrinos. The key to address some of these questions is by carrying out an universal analysis of nucleon structure from the simultaneous determination of the momentum and spin distributions of quarks and gluons and their fragmentation into hadrons. This effort requires combining an extensive experimental dataset and cutting-edge theory calculations within a machine learning framework where neural networks parametrise the underlying physical laws while minimizing ad-hoc model assumptions.
 +
 +
In this project, the student(s) will carry out a new global analysis of the spin structure of the proton by means of machine learning tools and state-of-the-art calculations in perturbative Quantum Chromodynamics, and integrate it within the corresponding global NNPDF analyses of unpolarised proton and nuclear structure in the framework of a combined integrated global analysis of non-perturbative QCD.
 +
 +
References: arXiv:2201.12363 , arXiv:2109.02653
 +
 +
''Contacts: [Mailto:j.rojo@vu.nl Juan Rojo]''
 +
------------------------------------------------------------------
 +
 +
 +
 +
== 2021 ==
 +
 +
===ALICE: The next-generation multi-purpose detector at the LHC===
 +
This main goal of this project is to focus on the next-generation multi-purpose detector planned to be built at the LHC. Its core will be a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X0 per layer, with the innermost layers possibly positioned inside the beam pipe. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou] and [mailto:Alessandro.Grelli@cern.ch Alessandro Grelli] and [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen]''
 +
 +
===ALICE: Searching for the strongest magnetic field in nature===
 +
In case of a non-central collision between two Pb ions, with a large value of impact parameter (b), the charged nucleons that do not participate in the interaction (called spectators) create strong magnetic fields. A back of the envelope calculation using the Biot-Savart law brings the magnitude of this filed close to 10^19Gauss in agreement with state of the art theoretical calculation, making it the strongest magnetic field in nature. The presence of this field could have direct implications in the motion of final state particles. The magnetic field, however, decays rapidly. The decay rate depends on the electric conductivity of the medium which is experimentally poorly constrained. Overall, the presence of the magnetic field, the main goal of this project, is so far not confirmed experimentally.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
 +
 +
===ALICE: Looking for parity violating effects in strong interactions===
 +
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions, in the presence of a deconfined state, gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, what is called the Chiral Magnetic Effect (CME).
 +
The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, however further studies are needed to constrain background effects. These highly anticipated results have the potential to reveal exiting, new physics.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
 +
 +
===ALICE: Machine learning techniques as a tool to study the production of heavy flavour particles===
 +
There was recently a shift in the field of heavy-ion physics triggered by experimental results obtained in collisions between small systems (e.g. protons on protons). These results resemble the ones obtained in collisions between heavy ions. This consequently raises the question of whether we create the smallest QGP droplet in collisions between small systems. The main objective of this project will be to study the production of charm particles such as D-mesons and Λc-baryons in pp collisions at the LHC. This will be done with the help of a new and innovative technique which is based on machine learning (ML). The student will also extend the studies to investigate how this production rate depends on the event activity e.g. on how many particles are created after every collision.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou] and [mailto:Alessandro.Grelli@cern.ch Alessandro Grelli]''
 +
 +
===ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma===
 +
One of the ways to study the quark-gluon plasma that is formed in high-energy nuclear collisions, is using high-energy partons (quarks or gluons) that are produced early in the collision and interact with the quark-gluon plasma as they propagate through it. There are several current open questions related to this topic, which can be explored in a Master's project. For example, we would like to use the new Monte Carlo generator framework JetScape to simulate collisions to see whether we can extract information about the interaction with the quark-gluon plasma. In the project you will collaborate with one of the PhD students or postdocs in our group to use the model to generate predictions of measurements and compare those to data analysis results. Depending on your interests, the project can focus more on the modeling aspects or on the analysis of experimental data from the ALICE detector at the LHC.
 +
 +
''Contact: [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen] and [mailto:marta.verweij@cern.ch Marta Verweij]''
 +
 +
===ALICE: Extreme Rare Probes of the Quark-Gluon Plasma===
 +
The quark-gluon plasma is formed in high-energy nuclear collisions and also existed shortly after the big bang.  With the large amount of data collected in recent years at the Large Hadron Collider at CERN, rare processes that previously were not accessible provide now new ways to study how the quark-gluon plasma emerges from the fundamental theory of strong interaction. One of such processes is the heavy W boson which in many cases decays to two quarks. The W boson itself doesn’t interact with the quark-gluon plasma because it doesn’t carry color, but the quark decay products do interact with the plasma and therefore provide an ideal tool to study the space-time evolution of this hot and dense medium. In this project you will use data from the ALICE detector at the LHC and simulated data from generators to study various physics mechanisms that could be happening in the real collisions.
 +
 +
''Contact: [mailto:marta.verweij@cern.ch Marta Verweij] and [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen]''
 +
 +
===ALICE: Jet Quenching with Machine Learning ===
 +
 +
Machine learning applications are rising steadily as a vital tool in the field of data science but are relatively new in the particle physics community. In this project machine learning tools will be used to gain insights into the modification of a parton shower in the quark-gluon plasma (QGP). The QGP is created in high-energy nuclear collisions and only lives for a very short period of time. Highly energetic partons created in the same collisions interact with the plasma while they travers it and are observed as a collimated spray of particles, known as jets, in the detector.  One of the key recent insights is that the internal structure of jets provides information about the evolution of the QGP. With data recorded by the ALICE experiment, you will use jet substructure techniques in combination with machine learning algorithms to dissect the structure of the QGP. Machine learning will be used to select the regions of radiation phase space that are affected by the presence of the QGP.
 +
 +
''Contact: [mailto:marta.verweij@cern.ch Marta Verweij] and [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen]''
 +
 +
 +
===ATLAS: Top Spin and EFTs in the Wtb vertex ===
 +
 +
The top quark has an exceptional high mass, close to the electroweak symmetry breaking scale and therefore sensitive to new physics effects. Theoretically, new physics is well described in the EFT framework [1]. The (EFT) operators are experimentally well accessible in single top t-channel production where the top quark is produced spin polarized. The focus at Nikhef is the operator O_{tW} with a possible imaginary phase, leading to CP violation. Experimentally, many angular distribution are reconstructed in the top rest frame to hunt for these effects.  There are several challenging analysis-topics for master students, which can also be tailored a bit your interests:
 +
1) MC study EFT effects from background substraction.
 +
2) NLO reweighting (as function of EFT parameters)  based on Madgraph
 +
3) Kinematic Fitter neural network estimation vs analytic as available
 +
4) Pt dependent analysis of existing analysis
 +
5) Make a combination with a higgs channel? (difficult)
 +
6) Make a combination with other top channels? (difficult)
 +
 +
More info in this presentation:
 +
www.nikhef.nl/~h73/top_masterstudenten_mrt2021.pptx
 +
and/or in the video:
 +
https://video.uva.nl/media/t/0_0f2fuazf
 +
 +
 +
[1] https://arxiv.org/abs/1807.03576
 +
 +
''Contact: Marcel Vreeswijk [mailto:h73@nikhef.nl] and Jordy Degens [mailto:jdegens@nikhef.nl]  ''
 +
 +
===ATLAS: The Next Generation===
 +
 +
After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays), advanced analysis techiques (using deep learning methods) and expanding the theory interpretation. Another opportunity would be the development of the first statistical combination of results between the ATLAS and CMS experiment, which could significantly improve the discovery potentional.
 +
 +
[1] https://arxiv.org/abs/1802.04329
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree]''
 +
 +
===ATLAS: The Most Energetic Higgs Boson===
 +
 +
The production of Higgs bosons at the highest energies could give the first indications for deviations from the standard model of particle physics, but production energies above 500 GeV have not been observed yet [1]. The LHC Run-2 dataset, collected during the last 4 years, might be the first opportunity to observe such processes, and we have various ideas for new studies. Possible developments include the improvement of boosted reconstruction techniques, for example using multivariate deep learning methods. Also, there are various opportunities for unexplored theory interpretations (using the MadGraph event generator), including effective field theory models (with novel ‘morphing’ techniques) and new interpretations of the newly observed boosted VZ(bb) process.
 +
 +
[1] https://arxiv.org/abs/1709.05543
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree]''
 +
 +
===ATLAS: Searching for new particles in very energetic diboson production===
 +
 +
The discovery of new phenomena in high-energy proton–proton collisions is one of the main goals of the Large Hadron Collider (LHC). New heavy particles decaying into a pair of vector bosons (WW, WZ, ZZ) are predicted in several extensions to the Standard Model (e.g. extended gauge-symmetry models, Grand Unified theories, theories with warped extra dimensions, etc). In this project we will investigate new ideas to look for these resonances in a region that is yet unexplored in the data. We will focus on the final states where both vector bosons decay into quarks as they are expected to bring the highest sensitivity [1]. We will try to reconstruct and exploit the polarisation of the vector bosons (using machine learning methods) and then tackle the problem of estimating contributions from beyond the Standard Model processes in the tails of the mass distribution.
 +
 +
[1] https://arxiv.org/abs/1906.08589
 +
 +
''Contact: [mailto:f.dias@nikhef.nl Flavia de Almeida Dias]''
 +
===ATLAS R&D: Study of LGAD sensors===
 +
The Atlas detector has been installed more than a decade ago. Several upgrades of the detector are being worked on that will adapt the ATLAS experiment to the so-called High Luminosity LHC. A new (sub)detector that will be installed and become part of the Atlas detector is the High-Granularity Timing Detector (HGTD) detector. The HGTD will measure very precisely the passage time of particles in the detector and will help identify from which of the plurious proton-proton collisions the particle originates from. The HGTD is partly made of LGAD sensors. These are granulated silicon sensors dedicatedly designed for the HGTD. In this project we will characterise the LGAD sensors. 
 +
 +
''Contact: [mailto:f.dias@nikhef.nl Hella Snoek]''
 +
 +
===LHCb: Measuring differences between electrons and muons, beyond the Standard Model===
 +
A current “hot topic” in the field of particle physics is the potential violation of lepton-universality.
 +
At the LHCb experiment, lepton-universality tests are performed by looking at the ratio of decays
 +
into muons and into electrons/taus. Recent measurements in meson modes show hints (2 ? 3?) of lepton non-universality.
 +
Baryonic modes, however, have been less studied and provide an independent test of lepton-universality.
 +
At Nikhef, we study the decay Lambdab->Lambda l+l- , where l can be an electron or a muon.
 +
There are two possible project topics:
 +
 +
1. Identifying novel analysis techniques in the high di-lepton invariant mass region. Electrons in this region undergo more Bremsstrahlung, and therefore have a worse momentum resolution,
 +
meaning background from the resonant Psi(2S) mode can leak into our signal. Since we expect most of our signal in this region, it is important to improve this, most likely using machine learning techniques.
 +
 +
2. Identifying, simulating, and setting up a rejection for partially reconstructed Lambdab->Lambda* l+l- backgrounds. By not fully reconstructing the excited Lambda*0, we can mis-reconstruct it as a signal
 +
candidate. Machine learning techniques could be explored.
 +
 +
''Contact: [mailto:l.greeven@nikhef.nl Lex Greeven] and [mailto:h71@nikhef.nl Niels Tuning]''
 +
 +
===LHCb: New physics in the angular distributions of B decays to K*ee===
 +
 +
Lepton flavour violation in B decays can be explained by a variety of non-standard model interactions. Angular distributions in decays of a B meson to a hadron and two leptons are an important source of information to understand which model is correct. Previous analyses at the LHCb experiment have considered final states with a pair of muons. Our LHCb group at Nikhef concentrates on a new measurement of angular distributions in decays with two electrons. The main challenge in this measurement is the calibration of the detection efficiency. In this project you will confront estimates of the detection efficiency derived from simulation with decay distributions in a well known B decay. Once the calibration is understood, the very first analysis of the angular distributions in the electron final state can be performed.
 +
 +
Contact: [mailto:wouterh@nikhef.nl Wouter Hulsbergen] and [mailto:m.senghi.soares@nikhef.nl Mara Soares]
 +
 +
===LHCb: Discovering heavy neutrinos in B decays===
 +
 +
Neutrinos are the lightest of all fermions in the standard model. Mechanisms to explain their small mass rely on the introduction of new, much heavier, neutral leptons. If the mass of these new neutrinos is below the b-quark mass, they can be observed in B hadron decays.
 +
 +
In this project we search for the decay of B+ mesons in into an ordinary electron or muon and the yet undisovered heavy neutrino. The heavy neutrino is expected to be unstable and in turn decay quickly into a charged pion and another electron or muon. The final state in which the two leptons differ in flavour, "B+ to e mu pi", is particularly interesting: It is forbidden in the standard model, such that backgrounds are small. The analysis will be performed within the LHCb group at Nikhef using LHCb run-2 data.
 +
 +
 +
''Contact: [mailto:v.lukashenko@nikhef.nl Lera Lukashenko] and''  [mailto:wouterh@nikhef.nl Wouter Hulsbergen]
 +
 +
===LHCb: Searching for dark matter in exotic six-quark particles===
 +
3/4 of the mass in the Universe is of unknown type. Many hypotheses about this dark matter have been proposed, but none confirmed. Recently it has been proposed that it could be made of particles made of the six quarks uuddss. Such a particle could be produced in decays of heavy baryons. It is proposed to use Xi_b baryons produced at LHCb to search for such a state. The latter would appear as missing 4-momentum in a kinematically constrained decay. The project consists in optimising a selection and applying it to LHCb data. See [https://arxiv.org/abs/1708.08951 arXiv:1708.08951]
 +
 +
''Contact: [mailto:patrick.koppenburg@cern.ch Patrick Koppenburg]''
 +
 +
=== LHCb: Measuring new decays with excited Ds states in semileptonic Bs decays to measure LFU ===
 +
One of the most striking discrepancies between the Standard Model and measurements are the lepton flavour universality (LFU) measurements with tau decays. At the moment, we have observed an excess of 3-4 sigma in B → Dτν decays. This could point even to a new force of nature! To understand this discrepancy, we need to make further measurements.
 +
 +
There are two very exciting (pun intended) projects to verify these discrepancies. These involve measuring the Bs → Ds2*τν and/or Bs → Ds1*τν decays. These decays with excited states of the Ds meson have not been observed before, and have a unique way of coupling to potential new physics candidates that can only be measured in Bs decays [1].
 +
 +
Another measurement with excited Ds mesons is the decay of Bs → Ds(2317)μν, which has also never been observed before. The Ds(2317) meson is much lighter than it should be according to the theoretical predictions, raising the question if it is actually a molecular state or perhaps a tetraquark. By measuring this semileptonic decay, we can shed some light on its structure [1,2].
 +
 +
[1] https://arxiv.org/abs/1606.09300
 +
 +
[2] https://arxiv.org/abs/1501.03422
 +
 +
Contact: [mailto:suzannek@nikhef.nl Suzanne Klaver]
 +
 +
===With the Dark Matter group: Fine structure constant===
 +
The fine-structure constant has been measured by many experiments in the past and it is one of the most precisely known constants in nature. The goal of this project is to design and build an experiment to do an in-house measurement of the fine structure constant by investigating positron annihilation to two and to three photons. The work within this project encompasses the full breadth of experimental physics: from a conceptual design to the final analysis of the data. In addition, there is a budget of 10kEuro available to purchase the necessary hardware for the project. Supervision will be done by Colijn and the Nikhef director Bentvelsen.
 +
 +
''Contact: [mailto:colijn@nikhef.nl Auke-Pieter Colijn]''
 +
 +
===Dark Matter: Sensitive tests of wavelength-shifting properties of materials for dark matter detectors===
 +
Rare event search experiments that look for neutrino and dark matter interactions are performed with highly sensitive detector systems, often relying on scintillators, especially liquid noble gases, to detect particle interactions. Detectors consist of structural materials that are assumed to be optically passive, and light detection systems that use reflectors, light detectors, and sometimes, wavelength-shifting materials. MSc theses are available related to measuring the efficiency of light detection systems that might be used in future detectors. Furthermore, measurements to ensure that presumably passive materials do not fluoresce, at the low level relevant to the detectors, can be done. Part of the thesis work can include Monte Carlo simulations and data analysis for current and upcoming dark matter detectors, to study the effect of different levels of desired and nuisance wavelength shifting. In this project, students will acquire skills in photon detection, wavelength shifting technologies, vacuum systems, UV and extreme-UV optics, detector design, and optionally in C++ programming, data analysis, and Monte Carlo techniques.
 +
 +
''Contact: [mailto:Tina.Pollmann@tum.de Tina Pollmann] and [mailto:decowski@nikhef.nl Patrick Decowski]''
 +
 +
=== Dark Matter: Building better Dark Matter Detectors - the XAMS  R&D Setup===
 +
The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 4kg of ultra-pure liquid xenon. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matter experiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data him/herself. You will "own" this experiment.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
===Dark Matter: Searching for Dark Matter Particles - XENONnT Data Analysis===
 +
The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently starting the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the new data coming from the XENONnT detector. The work will consist of understanding the detector signals and applying a deep neural network  to improve the (gas-) background discrimination in our Python-based analysis tool to improve the sensitivity for low-mass dark matter particles. The work will continue a study started by a recent graduate.  There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
===Dark Matter: The Ultimate Dark Matter Experiment - DARWIN Sensitivity Studies===
 +
DARWIN is the “ultimate” direct detection dark matter experiment, with the goal to reach the so-called “neutrino floor”, when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2027, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN, as part of a simulation team together with the University of Freiburg and Zurich. We are also working on a “fast simulation” that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills.
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
===Detector R&D: Test beam with a bent ALPIDE monolithic active pixel sensor===
 +
The next ALICE inner tracking system that is to be installed in 2025 at the large hadron collider (LHC) will feature ultrathin silicon monolithic active pixel sensors (MAPS). The current ALICE tracking system that has just been installed already features this new, very thin pixel detectors with low noise and low power consumption, but for the next tracker they will be bent around the beam pipe. In this project, you will be part of the international ALICE collaboration. You will analyze data from beam tests performed at CERN and DESY to characterize bent pixel detectors. You will be part of the Nikhef R&D group and will also have the opportunity to perform your own measurements in the lab on the ALICE pixel detector (ALPIDE) or on an even thinner version thereof. If the travel situation allows, you will have the opportunity to join the ALICE test beam group in Hamburg at DESY to take part in the exciting experience of taking real data.
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
===Detector R&D: Modeling radiation damage for the next generation ATLAS pixel detector===
 +
In 2026 the ATLAS tracker will be upgraded to the largest silicon tracker in the world. This tracker will have to cope with very large data rates foreseen in the upgraded high luminosity large hadron collider (HL-LHC). From then on, this tracker will see very high rates of radiation, particularly in the inner tracker closest to the LHC beam line. In this project you will evaluate the performance of the silicon pixel sensors for the new ATLAS inner tracker. You will learn to use commercial technology computer aided design software (TCAD) for modeling semiconductors widely used in the semiconductor industry and compare your simulation results with data from the beam tests performed on the new modules for ATLAS ITk at CERN. You will also use and develop fast simulation tools like Allpix Squared for which you will use your C++ programming skills. As a member of the international ATLAS collaboration you will present your work in an international environment, and you will be part of the Nikhef detector R&D group where you will learn about the newest fast timing silicon detector technologies for LHC experiments and beyond.
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
===Detector R&D: Characterisation of Trench Isolated Low Gain Avalanche Detectors (TI-LGAD) ===
 +
The future vertex detector of the LHCb Experiment needs to measure the spatial coordinates and time of the particles originating in the LHC proton-proton collisions with resolutions better than 10 um and 50 ps, respectively. Several technologies are being considered to achieve these resolutions.  Among those is a novel sensor  technology called Trench Isolated Low Gain Avalanche Detector.
 +
Prototype pixelated sensors have been manufactured recently and have to be characterised. Therefore these new sensors will be bump bonded to a Timepix4 ASIC which provides charge and time measurements in each of 230 thousand pixels. Characterisation will be done using a lab setup at Nikhef, and includes tests with a micro-focused laser beam, radioactive sources, and possibly with particle tracks obtained in a test-beam.  This project involves data taking with these new devices and analysing the data to determine the performance parameters such as the spatial and temporal resolution. as function of temperature and other operational conditions.
 +
 +
''Contacts: [mailto:kazu.akiba@nikhef.nl Kazu Akiba] and [mailto:martinb@nikhef.nl Martin van Beuzekom]''
 +
 +
===Detector R&D: Studying fast timing detectors===
 +
Fast timing detectors are the solution for future tracking detectors. In future LHC operation conditions and future colliders, more and more particles are produced per collision. The high particle densities make it increasingly more difficult to separate particle trajectories with the spatial information that current silicon tracking detectors provide. A solution would be to add very precise (in order of 10ps) timestamps to the spatial measurements of the particle trackers. A good understanding of the performance of fast timing detectors is necessary. With the user of a pulsed laser in the lab we study the characteristics of several prototype detectors.
 +
 +
''Contact: [mailto:hella.snoek@.nl Hella Snoek] or [mailto:kazu.akiba@nikhef.nl Kazu Akiba]''
 +
===Detector R&D: Laser Interferometer Space Antenna (LISA) - Wavefront sensors for gravitational wave detection ===
 +
The space-based gravitational wave antenna LISA is one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecraft separated by a few million kilometres. This constellation measures tiny variations in the distances between test-masses located in each satellite to detect gravitational waves from sources such as supermassive black holes. LISA is based on laser interferometry, and the three satellites form a giant Michelson interferometer. LISA measures a relative phase shift between one local laser and one distant laser by light interference. The phase shift measurement requires sensitive wavefront sensors. The Nikhef DR&D group fabricated prototype sensors in 2020 together with the Photonics industry and the Dutch institute for space research SRON. As an MSc student, you will work on various aspects of the wavefront sensor development: study the performance of the epitaxial stacks of Indium-Gallium-Arsenide, setting up test benches to characterize the sensors, and performing the actual tests and data analysis.
 +
 +
''Contact: [mailto:nielsvb@nikhef.nl Niels van Bakel]''
 +
 +
===Detector R&D: Time tracking Cosmic rays ===
 +
One of the main challenges in particle physics detector technologies is to perform precise time measurements while maintaining, or even improving, the excellent spatial resolution. New sensor prototypes need to be characterised using charged particles in order to determine the actual temporal resolution.  Such a characterisation can be done for instance with high energy cosmic rays.  In this project you will work on building, commissioning and characterising a compact timing cosmic ray setup, aiming to achieve a resolution better than 100 picoseconds.  The work will take place in the R&D labs at Nikhef using a combination of existing detectors and readout electronics as well as new silicon detectors with internal gain (LGADs), and/or fast Micro Channel Plates (MCPs).
 +
 +
''Contacts: [mailto:kazu.akiba@nikhef.nl Kazu Akiba] and [mailto:martinb@nikhef.nl Martin van Beuzekom]''
 +
 +
===Neutrinos: Searching for Majorana Neutrinos with KamLAND-Zen===
 +
The KamLAND-Zen experiment, located in the Kamioka mine in Japan, is a large liquid scintillator experiment with 750kg of ultra-pure Xe-136 to search for neutrinoless double-beta decay (0n2b). The observation of the 0n2b process would be evidence for lepton number violation and the Majorana nature of neutrinos, i.e. that neutrinos are their own anti-particles. Current limits on this extraordinary rare hypothetical decay process are presented as a half-life, with a lower limit of 10^26 years. KamLAND-Zen, the world’s most sensitive 0n2b experiment, is currently taking data and there is an opportunity to work on the data analysis, analyzing data with the possibility of taking part in a ground-breaking discovery. The main focus will be on developing new techniques to filter the spallation backgrounds, i.e.  the production of radioactive isotopes by passing muons. There will be close collaboration with groups in the US (MIT, Berkeley, UW) and Japan (Tohoku Univ).
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski]''
 +
 +
===Neutrinos: acoustic detection of ultra-high energy neutrinos===
 +
 +
The study of the cosmic neutrinos of energies above 1017 eV, the so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent astrophysical sources, such as gamma ray bursts, supernovae or even dark matter. In addition, the observation of high energy neutrinos may provide a unique tool to study interactions at high energies. The energy deposition of these extreme neutrinos in water induce a thermo-acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope.
 +
 +
The work will be executed at the Nikhef institute and/or the TNO laboratories in Delft. In this project master students have the opportunity to contribute in the following ways:
 +
 +
'''Project 1:''' Hardware development on fiber optics hydrophones technology Goal: characterize existing prototype optical fibre hydrophones in an anechoic basin at TNO laboratory. Data collection, calibration, characterization, analysis of consequences for design future acoustic hydrophone neutrino telescopes;
 +
Keywords: Optical fiber technology, signal processing, electronics, lab.
 +
 +
'''Project 2:''' Investigation of ultra-high energy neutrinos and their interactions with matter. Goal: Discriminate the neutrino signals from the background noises, in particular clicks from whales and dolphins in the deep sea. Study impact on physics reach for future acoustic hydrophone neutrino telescopes;
 +
Keywords: Monte Carlo simulations, particle physics, neutrino physics, data analysis algorithms.
 +
 +
Further information: Info on ultra-high energy neutrinos can be found at: http://arxiv.org/abs/1102.3591; Info on acoustic detection of neutrinos can be found at: http://arxiv.org/abs/1311.7588
 +
 +
''Contact: [mailto:ernst-jan.buis@tno.nl Ernst Jan Buis]'' or ''[mailto:ivo.van.vulpen@nikhef.nl Ivo van Vulpen]''
 +
 +
===Neutrinos: Oscillation analysis with the first data of KM3NeT===
 +
 +
The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In this project the available data will be used together with simulations to best reconstruct the event topologies and optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector. The data will then be used to measure neutrino oscillation parameters, and prepare for a future neutrino mass ordering determination.
 +
 +
Programming skills are essential, mostly root and C++ will be used.
 +
''Contact: [mailto:bruijn@nikhef.nl Ronald Bruijn] [mailto:h26@nikhef.nl Paul de Jong]''
 +
 +
===Neutrinos: Searching for New Heavy Neutrinos or Other Exotic Particles in KM3NeT===
 +
 +
In this project we will be searching for a new heavy neutrino, looking at signatures created by atmospheric neutrinos interacting in the detector volume of KM3NeT-ORCA. The aim of this project is to study a specific event topology which appears as double blobs of signals detected separately by densely instrumented ORCA detector units. We will be exploiting the tau reconstruction algorithms to verify the possibility of ORCA to detect such signals and to estimate the potential sensitivity of the experiment as well. The data also opens up the possibility to search for other exotic new particles, such as magnetic monopoles. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (and possibly C++) and ROOT are advantageous but not mandatory.
 +
 +
''Contact: [mailto:suzanbp@nikhef.nl Suzan B. du Pree] [mailto:dveijk@nikhef.nl Daan van Eijk] [mailto:h26@nikhef.nl Paul de Jong]''
 +
 +
===Neutrinos: Dark Matter with KM3NeT-ORCA===
 +
 +
Dark Matter is thought to be everywhere (we should be swimming through it), but we have no idea what it is. Using the good energy and angular resolutions of the KM3NeT neutrino telescope, we can search for Dark Matter signatures that originate from the center of our galaxy. In this project, we will search for such signatures using the reconstructed track and shower events with the KM3NeT-ORCA detector to discover relatively light Dark Matter particles. Since this year, the KM3NeT-ORCA  experiment has 6 detection lines under the Mediterranean Sea: fully operational and continuously taking data. Using the available data, it is possible to compare data and simulation for different event topologies and to estimate the experiment's sensitivity. The project is suitable for a student who is interested to explore new physics scenarios and willing to develop new skills. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (possibly C++) and ROOT data analysis tool are advantageous but not mandatory.
 +
 +
''Contact: [mailto:suzanbp@nikhef.nl Suzan B. du Pree] [mailto:dveijk@nikhef.nl Daan van Eijk]''
 +
 +
===Neutrinos: the Deep Underground Neutrino Experiment (DUNE)===
 +
 +
The Deep Underground Neutrino Experiment (DUNE) is under construction in the USA, and will consist of a powerful neutrino beam originating at Fermilab, a near detector at Fermilab, and a far detector in the SURF facility in Lead, South Dakota, 1300 km away. During travelling, neutrinos oscillate and a fraction of the neutrino beam changes flavour; DUNE will determine the neutrino oscillation parameters to unrivaled precision, and try and make a first detection of CP-violation in neutrinos. In this project, various elements of DUNE can be studied, including the neutrino oscillation fit, neutrino physics with the near detector, event reconstruction and classification (including machine learning), or elements of data selection and triggering.
 +
 +
''Contact: [mailto:h26@nikhef.nl Paul de Jong]''
 +
 +
 +
===Gravitational Waves: Computer modelling to design the laser interferometers for the Einstein telescope===
 +
 +
A new field of instrument science led to the successful detection of gravitational waves by the LIGO detectors in 2015. We are now preparing the next generation of gravitational wave observatories, such as the Einstein Telescope, with the aim to increase the detector sensitivity by a factor of ten, which would allow, for example, to detect stellar-mass black holes from early in the universe when the first stars began to form. This ambitious goal requires us to find ways to significantly improve the best laser interferometers in the world.
 +
 +
Gravitational wave detectors, such as LIGO and VIRGO, are complex Michelson-type interferometers enhanced with optical cavities. We develop and use numerical models to study these laser interferometers, to invent new optical techniques and to quantify their performance. For example, we synthesize virtual mirror surfaces to study the effects of higher-order optical modes in the interferometers, and we use opto-mechanical models to test schemes for suppressing quantum fluctuations of the light field. We can offer several projects based on numerical modelling of laser interferometers. All projects will be directly linked to the ongoing design of the Einstein Telescope.
 +
 +
''Contact: [mailto:a.freise@nikhef.nl Andreas Freise]''
 +
 +
=== Gravitational Waves: Digging away the noise to find the signal ===
 +
 +
Gravitational Wave interferometers are extremely sensitive, but suffer
 +
from instrumental issues that produce noise that mimics astrophysical
 +
signals. This needs to be solved as much as possible before the data
 +
analysis. The problem is that  instrumentalists don't know about
 +
analysis pipelines, and data analysts don't know about experimental
 +
details. We need your help to bridge the gap. This is a good opportunity
 +
to learn about both sides and contribute directly to a booming
 +
international field. We have several tools and new ideas for correlating
 +
noises with the state of the instrument. These need to be developed
 +
further, used on years of data, and written up. Will require Python,
 +
signal processing and statistics.
 +
 +
''Contact: [mailto:swinkels@nikhef.nl Bas Swinkels] and [mailto:physarah@gmail.com Sarah Caudill]''
 +
 +
===Theory: The electroweak phase transition and baryogenesis/gravitational wave production===
 +
 +
In extensions of the Standard Model the electroweak phase transition can be first order and proceed via the nucleation of bubbles. Colliding bubbles can produce gravitational waves [1] and plasma particles interacting with the bubbles can generate a matter-antimatter asymmetry [2]. A detailed understanding of the dynamics of the phase transitions is needed to accurately describe these processes.  One project is to study QFT at finite temperature and compare/apply methods that address the non-perturbative IR dynamics of the thermal processes [3,4].  Another project is to calculate the velocity by which the bubbles expand, which is an important parameter for gravitational waves production and baryogensis. A final option is to study the phase transition in conformal Higgs models, which naturally have a strong 1st order phase transition [5].
 +
 +
[1]https://arxiv.org/abs/1705.01783
 +
[2]https://arxiv.org/pdf/hep-ph/0609145.pdf
 +
[3]https://arxiv.org/pdf/1609.06230.pdf
 +
[4]https://arxiv.org/pdf/1612.00466.pdf
 +
[5]https://arxiv.org/abs/1910.13460.pdf
 +
 +
''Contact: [mailto:mpostma@nikhef.nl Marieke Postma]''
 +
 +
===Theory: Higgs inflation===
 +
 +
The Higgs boson can drive cosmic inflation provided it has new couplings to gravity [1]. Although classically the model is in excellent agreement with the data, in the full quantum theory there are theoretical consistency issues. One possible project would be to embed Higgs inflation in [2] -- motivated to solve the Strong CP problem and explain the matter-antimatter asymmetry -- as the extended Higgs sector can alleviate the theoretical constraints. Another direction is to consider multiple new couplings to gravity [3], to see whether the ensuing inflationary dynamics allows for the production of primordial black holes.
 +
 +
[1]https://arxiv.org/pdf/1307.0708.pdf
 +
[2]https://arxiv.org/pdf/2007.12711.pdf
 +
[3]https://arxiv.org/abs/2011.09485.pdf
 +
 +
''Contact: [mailto:mpostma@nikhef.nl Marieke Postma]''
 +
 +
===Theory: Neutrinos, hierarchy problem and cosmology===
 +
 +
The electroweak hierachy is radiatively stable if the quadratic term in the Higgs potential is generated dynamically. This is achieved in 'the neutrino option' [1] where the Higgs potential stems exclusively from quantum effects of heavy right-handed neutrinos, which can also generate the mass pattern of the oberved left-handed neutrinos.  The project focusses on model building aspects (e.g. [2]) and the cosmology (e.g. leptogenesis [3]) of these set-ups.
 +
 +
[1] https://arxiv.org/pdf/1703.10924.pdf
 +
[2] https://arxiv.org/pdf/1807.11490.pdf
 +
[3] https://arxiv.org/pdf/1905.12642.pdf
 +
 +
''Contact: [mailto:mpostma@nikhef.nl Marieke Postma]''
 +
 +
 +
== 2020 ==
 +
 +
=== ATLAS: Top Spin optimal observables using Artificial Intelligence ===
 +
 +
The top quark has an exceptional high mass, close to the electroweak symmetry breaking scale and therefore sensitive to new physics effects. Theoretically, new physics is well described in the EFT framework [1]. The (EFT) operators are experimentally well accessible in single top t-channel production where the top quark is produced spin polarized. The focus at Nikhef is the operator O_{tW} with a possible imaginary phase, leading to CP violation. Experimentally, many angular distribution are reconstructed in the top rest frame to hunt for these effects. We are looking for a limited set of optimal observables. The objective of your Master project would be to find optimal observables using simulated events including the detector effects and possible systematic deviations. All techniques are allowed, but promising new developments are methods which involve artifical intelligence. This work could lead to an ATLAS note.
 +
 +
[1] https://arxiv.org/abs/1807.03576
 +
 +
''Contact: Marcel Vreeswijk [mailto:h73@nikhef.nl] and Jordy Degens [mailto:jdegens@nikhef.nl]  ''
 +
 +
=== ATLAS: The Next Generation ===
 +
 +
After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays), advanced analysis techiques (using deep learning methods) and expanding the theory interpretation. Another opportunity would be the development of the first statistical combination of results between the ATLAS and CMS experiment, which could significantly improve the discovery potentional.
 +
 +
[1] https://arxiv.org/abs/1802.04329
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree and Marko Stamenkovic]''
 +
 +
=== ATLAS: The Most Energetic Higgs Boson ===
 +
 +
The production of Higgs bosons at the highest energies could give the first indications for deviations from the standard model of particle physics, but production energies above 500 GeV have not been observed yet [1]. The LHC Run-2 dataset, collected during the last 4 years, might be the first opportunity to observe such processes, and we have various ideas for new studies. Possible developments include the improvement of boosted reconstruction techniques, for example using multivariate deep learning methods. Also, there are various opportunities for unexplored theory interpretations (using the MadGraph event generator), including effective field theory models (with novel ‘morphing’ techniques) and new interpretations of the newly observed boosted VZ(bb) process.
 +
 +
[1] https://arxiv.org/abs/1709.05543
 +
 +
''Contact: [mailto:tdupree@nikhef.nl Tristan du Pree and Brian Moser]''
 +
 +
=== LHCb: Measurement of delta md  ===
 +
The decay B0->D-pi+ is very abundant in LHCb, and therefore ideal to study the oscillation frequency
 +
delta md, with which B0 mesons oscillate into anti-B0 mesons, and vice versa.
 +
This process proceeds through a so-called box diagram which might hide new yet-undiscovered particles.
 +
Recently, it has been realized that value of delta md is in tension with the valu of CKM-angle gamma,
 +
triggering renewed interest in this measurement.
 +
 +
''Contact: [mailto:Marcel.Merk@nikhef.nl Marcel Merk]''
 +
 +
=== LHCb: Searching for CPT violation ===
 +
CPT symmetry is closely linked to Lorentz symmetry, and any violation
 +
would revolutionize science. There are possibilities though that supergravity could
 +
cause CPT violating effects in the system of neutral mesons.
 +
The precise study of B0s oscillations in the abundant Bs->Dspi decays can
 +
give the most stringent limits on Im(z) to date.
 +
 +
''Contact: [mailto:Marcel.Merk@nikhef.nl Marcel Merk]''
 +
 +
=== LHCb: BR(B0->D-pi+) and fd/fu with B+->D0pi+ ===
 +
The abundant decay B0->D-pi+ is often used as normalization channel, given its
 +
clean signal, and well-known branching fraction, as measured by the B-factories.
 +
However, this branching fraction can be determined more precisely, when comparing
 +
to the decay B+->D0pi+ , which has a twice better precision.
 +
In addition, the production of B0 and B+ mesons is often assumed to be equal,
 +
based on isospin symmetry. The study of B+->D0pi+ and B0->D-pi+ allows for the
 +
first measurement of this ratio, fd/fu.
 +
 +
''Contact: [mailto:Marcel.Merk@nikhef.nl Marcel Merk]''
 +
 +
 +
=== LHCb: Optimization studies for Vertex detector at the High Lumi LHCb ===
 +
The LHCb experiment is dedicated to measure tiny differences between matter and antimatter through the precise study of rare processes involving b or c quarks.  The LHCb detector will undergo a major modification in order to dramatically increase the luminosity and be able to  measure indirect effects of physics beyond the standard model.  In this environment, over 42 simultaneous collisions are expected to happen at a time interval of 200 ps where the two proton bunches overlap. The particles of interest have a relatively long lifetime and therefore the best way to distinguish them from the background collisions is through the precise reconstruction of displaced vertices and pointing directions.  The new detector considers using extremely recent or even future technologies to measure space (with resolutions below 10 um) and time (100 ps or better) to efficiently reconstruct the events of interest for physics.  The project involves changing completely  the LHCb Vertex Locator (VELO) design in simulation and determine what can be the best performance for the upgraded detector, considering different spatial and temporal resolutions.
 +
 +
''Contact: [mailto:kazu.akiba@nikhef.nl Kazu Akiba]''
 +
 +
=== LHCb: Measurement of charge multiplication in heavily irradiated sensors ===
 +
During the R&D phase for the LHCb VELO Upgrade detector a few sensor prototypes were irradiated to the extreme fluence expected to be achieved during the detector lifetime. These samples were tested using high energy particles at the SPS facility at CERN with their trajectories reconstructed by the Timepix3 telescope. A preliminary analysis revealed that at the highest irradiation levels the amount of signal observed is higher than expected, and even larger than the signal obtained at lower doses.  At the Device Under Test (DUT) position inside the telescope, the spatial resolution attained by this system is below 2 um. This means that a detailed analysis can be performed in order to study where and how this signal amplification happens within  the 55x55 um^2 pixel cell.  This project involves analysing the telescope and DUT data to investigate the charge multiplication mechanism at the microscopic level.
 +
 +
''Contact: [mailto:kazu.akiba@nikhef.nl Kazu Akiba]''
 +
 +
=== LHCb: Testing the flavour anomalies at LHCb ===
 +
Lepton Flavour Universality (LFU) is an intrinsic property of the Standard Model, which implies that the three generation of leptons are subject to the same interactions. This fundamental law of the SM can be investigated by looking at rare B-meson decay with muons or electron in the final state. Recent measurements of these decays from LHCb show deviation from the SM (known as flavour anomalies) that, if confirmed, would lead to a major discovery of New Physics (NP). The project consists in the analysis of the 2017-18 dataset, which will double the statistic of the current results. This new dataset will lead to a measurement with better precision, which can either confirm or exclude the contribution of NP to these decays. The project will explore all the crucial aspect of data analysis, from simulation to signal modeling, including cutting-edge software, such us fitting large amount of data using GPU (Graphic Processing Unit).
 +
 +
''Contact: [mailto:a.mauri@cern.ch Andrea Mauri] and [mailto:marcel.merk@nikhef.nl Marcel Merk]''
 +
 +
=== LHCb: Search for long-lived heavy neutral leptons in B decays ===
 +
The mass of neutrinos are many orders of magnitude smaller than that of the other fermions. In the seesaw mechanism this puzzling fact is explained by the existence of another set of neutral leptons that are much heavier in mass. If their mass is below about 5 GeV such neutrinos can be produced at the LHC in decays of B hadrons. Their small coupling will lead to a lifetime of the order of pico-seconds which means that they will fly an observable distance before they decay. In this project we search for such long-lived heavy neutrinos in decays of charged B mesons using the LHCb run-2 dataset.
 +
 +
'' Contact: [mailto:v.lukashenko@nikhef.nl Lera Lukashenko] and [mailto:wouter.hulsbergen@nikhef.nl Wouter Hulsbergen]''
 +
 +
=== LHCb: Discovering the Bc->eta_c mu nu decay ===
 +
The Bc meson, consisting of heavy c and anti-b quarks, is of great interest for flavour physics. Recent LHCb measurement on Bc->J/psi l nu decays [1] showed a possible deviation from the Standard Model prediction, which entered the so-called lepton universality puzzle - the hottest topic in the b-physics in recent years. Following that, the study of a similar decay mode - Bc->eta_c mu nu - is strongly requested by the theory community. However, the reconstruction of the eta_c meson is challenging, so that the decay has not been discovered yet. The project aims at discovery of the Bc->eta_c mu nu decay using unique capabilities of the LHCb experiment. The data analysis will consist of finding the optimal event selection using machine learning techniques, research on background sources, performing fits to data, etc. The project requires to be not afraid of analysis software and statistics. The results will be presented in collaboration: talks at working group meetings, analysis note, etc.  Skills in git, python and ROOT (and similar packages) are extremely welcome.
 +
 +
[1] https://arxiv.org/pdf/1711.05623.pdf
 +
 +
''Contact: [mailto:andrii.usachov@nikhef.nl Andrii Usachov] and [mailto:marcel.merk@nikhef.nl Marcel Merk]''
 +
 +
=== ALICE: Searching for the strongest magnetic field in nature ===
 +
In case of a non-central collision between two Pb ions, with a large value of impact parameter (b), the charged nucleons that do not participate in the interaction (called spectators) create strong magnetic fields. A back of the envelope calculation using the Biot-Savart law brings the magnitude of this filed close to 10^19Gauss in agreement with state of the art theoretical calculation, making it the strongest magnetic field in nature. The presence of this field could have direct implications in the motion of final state particles. The magnetic field, however, decays rapidly. The decay rate depends on the electric conductivity of the medium which is experimentally poorly constrained. Overall, the presence of the magnetic field, the main goal of this project, is so far not confirmed experimentally.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
 +
 +
=== ALICE: Looking for parity violating effects in strong interactions ===
 +
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions, in the presence of a deconfined state, gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, what is called the Chiral Magnetic Effect (CME).
 +
The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, however further studies are needed to constrain background effects. These highly anticipated results have the potential to reveal exiting, new physics.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
 +
 +
=== ALICE: Machine learning techniques as a tool to study the production of heavy flavour particles ===
 +
There was recently a shift in the field of heavy-ion physics triggered by experimental results obtained in collisions between small systems (e.g. protons on protons). These results resemble the ones obtained in collisions between heavy ions. This consequently raises the question of whether we create the smallest QGP droplet in collisions between small systems. The main objective of this project will be to study the production of charm particles such as D-mesons and Λc-baryons in pp collisions at the LHC. This will be done with the help of a new and innovative technique which is based on machine learning (ML). The student will also extend the studies to investigate how this production rate depends on the event activity e.g. on how many particles are created after every collision.
 +
 +
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou] and [mailto:Alessandro.Grelli@cern.ch Alessandro Grelli]''
 +
 +
=== ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma ===
 +
One of the ways to study the quark-gluon plasma that is formed in high-energy nuclear collisions, is using high-energy partons (quarks or gluons) that are produced early in the collision and interact with the quark-gluon plasma as they propagate through it. There are several current open questions related to this topic, which can be explored in a Master's project. For example, we would like to use the new Monte Carlo generator framework JetScape to simulate collisions to see whether we can extract information about the interaction with the quark-gluon plasma. In the project you will collaborate with one of the PhD students or postdocs in our group to use the model to generate predictions of measurements and compare those to data analysis results. Depending on your interests, the project can focus more on the modeling aspects or on the analysis of experimental data from the ALICE detector at the LHC.
 +
 +
''Contact: [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen] and [mailto:marta.verweij@cern.ch Marta Verweij]''
 +
 +
=== ALICE: Extreme Rare Probes of the Quark-Gluon Plasma ===
 +
The quark-gluon plasma is formed in high-energy nuclear collisions and also existed shortly after the big bang.  With the large amount of data collected in recent years at the Large Hadron Collider at CERN, rare processes that previously were not accessible provide now new ways to study how the quark-gluon plasma emerges from the fundamental theory of strong interaction. One of such processes is the heavy W boson which in many cases decays to two quarks. The W boson itself doesn’t interact with the quark-gluon plasma because it doesn’t carry color, but the quark decay products do interact with the plasma and therefore provide an ideal tool to study the space-time evolution of this hot and dense medium. In this project you will use data from the ALICE detector at the LHC and simulated data from generators to study various physics mechanisms that could be happening in the real collisions.
 +
 +
''Contact: [mailto:marta.verweij@cern.ch Marta Verweij] and [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen]''
 +
 +
=== ALICE: Jet Quenching with Machine Learning ===
 +
 +
Machine learning applications are rising steadily as a vital tool in the field of data science but are relatively new in the particle physics community. In this project machine learning tools will be used to gain insights into the modification of a parton shower in the quark-gluon plasma (QGP). The QGP is created in high-energy nuclear collisions and only lives for a very short period of time. Highly energetic partons created in the same collisions interact with the plasma while they travers it and are observed as a collimated spray of particles, known as jets, in the detector.  One of the key recent insights is that the internal structure of jets provides information about the evolution of the QGP. With data recorded by the ALICE experiment, you will use jet substructure techniques in combination with machine learning algorithms to dissect the structure of the QGP. Machine learning will be used to select the regions of radiation phase space that are affected by the presence of the QGP.
 +
 +
''Contact: [mailto:marta.verweij@cern.ch Marta Verweij] and [mailto:marco.van.leeuwen@cern.ch Marco van Leeuwen]''
 +
 +
=== Lepton Collider: Pixel TPC testbeam ===
 +
In the Lepton Collider group at Nikhef we work on a tracking detector for a future Collider (e.g. the ILC in Japan). We are developing a gaseous Time Projection Chamber with a pixel readout. At Nikhef we have built an 8-quad GridPix module based on the Timepix3 chip, which is a detector of about 20 cm x 40 cm x 10 cm in size. In August 2020 we will test the device at the DESY particle accelerator in Hamburg. For the project you could work on preparations for the test beam (e.g. running the data acquisition, perform data monitoring using our set up in the lab). The next topics will be the participation in the data taking during the test beam at DESY, the analysis of the data using C++ and ROOT and - finally - publication of the results in a scientific journal.
 +
 +
Our latest paper can be found in https://www.nikhef.nl/~s01/quad_paper.pdf [www.nikhef.nl].
 +
 +
''Contact: [mailto:Peter.Kluit@nikhef.nl Peter Kluit] and Kees Ligtenberg''
 +
 +
=== Dark Matter: Sensitive tests of wavelength-shifting properties of materials for dark matter detectors ===
 +
Rare event search experiments that look for neutrino and dark matter interactions are performed with highly sensitive detector systems, often relying on scintillators, especially liquid noble gases, to detect particle interactions. Detectors consist of structural materials that are assumed to be optically passive, and light detection systems that use reflectors, light detectors, and sometimes, wavelength-shifting materials. MSc theses are available related to measuring the efficiency of light detection systems that might be used in future detectors. Furthermore, measurements to ensure that presumably passive materials do not fluoresce, at the low level relevant to the detectors, can be done. Part of the thesis work can include Monte Carlo simulations and data analysis for current and upcoming dark matter detectors, to study the effect of different levels of desired and nuisance wavelength shifting. In this project, students will acquire skills in photon detection, wavelength shifting technologies, vacuum systems, UV and extreme-UV optics, detector design, and optionally in C++ programming, data analysis, and Monte Carlo techniques.
 +
 +
''Contact: [mailto:Tina.Pollmann@tum.de Tina Pollmann] and [mailto:decowski@nikhef.nl Patrick Decowski]''
 +
 +
=== Dark Matter: Signal reconstruction in XENONnT ===
 +
The next generation direct detection dark matter experiment - XENONnT - comprises close to 500 photomultiplier tubes (PMTs) in the main detector volume. These PMTs are configured to be able to detect even single photons. When a single photoelectron (PE) signal is detected the detected signal (a pulse) is convoluted with the detector response of the PMT. Due to this detector response the pulse shape of a single PE is spread out in time. For XENONnT we would like to explore the possibility to implement a digital (software) filter to deconvolve the detected pulse back to the “true” instantaneous shape (without the detector spread). This is a virtually unexplored new step in the Xenon analysis framework. Later in the analysis framework these pulses from all the PMTs are combined into a signal referred to as a ‘peak’. For XENONnT it is of essence to be extremely good in discriminating between two types of peaks caused by interactions in the detector; a prompt primary scintillation signal (S1) and a secondary ionization signal (S2). The parameters in the software haven’t - as of the time of writing - been optimized for the XENONnT-detector conditions.
 +
The student would investigate how a deconvolution filter would benefit the XENONnT analysis framework and develop such a filter. Furthermore, the student will work on the classification of these signals to fully exploit the XENONnT-detector to optimize the classification. This will be done with simulated data at first but may later even be performed on actual XENONnT-data. As an extension, the possibility of applying machine learning to correctly distinguish between the two signals could be explored. This is a data-analysis oriented project where Python skills are paramount.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:j.angevaare@nikhef.nl Joran Angevaare]''
 +
 +
=== Dark Matter: XAMS  R&D Setup ===
 +
The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 4kg of ultra-pure liquid xenon. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matter experiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data him/herself. You will "own" this experiment.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
=== Dark Matter: DARWIN Sensitivity Studies ===
 +
DARWIN is the "ultimate" direct detection dark matter experiment, with the goal to reach the so-called "neutrino floor", when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2025, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN, as part of a simulation team together with the University of Freiburg and Zurich. We are also working on a "fast simulation" that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
=== Dark Matter: Fast simulation studies ===
 +
For Dark Matter experiments it is crucial to understand sources of backgrounds in great detail. The most common way to study the effect of backgrounds to the Dark Matter sensitivity is by the
 +
use of Monte Carlo simulations. Unfortunately, the standard Monte Carlo techniques are extremely inefficient. One needs to sometimes simulate millions of events before one background event appears in the Dark Matter search area. We have developed a Monte Carlo technique that accelerates this process by up to 1000x. The method has been validated on very simple and unrealistic detector models. In goal of this project is to make a realistic detector model for the fast detector simulations. For this we are looking for a student with good programming skills, an interest in a software project, and the desire to deeply understand analysis of Dark Matter experimental data. 
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
=== Dark Matter & Amsterdam Scientific Instruments: Simulations for Industry ===
 +
In the Nikhef Dark Matter group we have built up an extensive expertise with Monte Carlo simulations of ionizing radiation. Although these simulations have the aim to estimate background levels in our XENON experiments, the same techniques can be applied to study radiation transport in industrial devices. Amsterdam Scientific Instruments (ASI) is a company at Science Park that develops and sells radiation imaging equipment that is used amongst others in electron microscopy. For this application ASI needs a detailed study of gamma ray backgrounds to optimize shielding for their products. The project aims at optimizing a shielding design based on GEANT4 simulations. The results may be implemented in next generation products of ASI. We are looking for a student with preferably strong computing skills, and with an interest in science-industrial collaboration.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
=== The Modulation experiment: Data Analysis  ===
 +
For years there have been controversial claims of potential new-physics on the basis of time-varying decay rates of radioactive sources on top of ordinary exponential decay. While some of these claims have been refuted, others have still to be confirmed or falsified. To this end, a dedicated experiment - the modulation experiment - has been designed and operational for the past four years. Using four identical and independent setups the experiment is almost ready for a final analysis to conclude on these claims. In this project the student will perform this analysis, preferably resulting in a conclusive paper. This will require combining the data of the four setups and close collaboration with a small group constituting a collaboration of the four different involved institutes (Purdue University (USA), Universität Zürich (Switzerland), Centro Brasileiro de Pesquisas Fisicas (Brasil) and Nikhef). This project is data-analysis oriented. Additionally, lab-skills can be required as one of the setups is situated at Nikhef.
 +
 +
 +
''Contact: [mailto:z37@nikhef.nl Auke Colijn] and [mailto:j.angevaare@nikhef.nl Joran Angevaare]''
 +
 +
=== Detector R&D: Performance of the ALPIDE monolithic active pixel sensor with radiation damage ===
 +
The ALICE inner tracking system (ITS) 2 is currently being installed at the large hadron collider (LHC) at CERN. This detector makes use of ultra-lightweight monolithic active pixel sensors, the first to use this technology at a particle collider after the STAR experiment at RHIC in Brookhaven. These very thin pixel detectors have a low power consumption, result in very little material in the detector, and still have optimal timing and resolution -- and are a promising technology for future experiments. You will be part of the international ALICE collaboration and investigate the ALICE ALPIDE chip. Although ALICE will not see high levels of radiation at the LHC, it has so far not been tested whether this chip can withstand very high levels of radiation and could be, if there is no large degradation in performance, be used in experiments like ATLAS as well. You will be part of the Nikhef R&D group where you will learn about new detector technologies for high energy physics and learn to design a test setup to characterize the ALPIDE chip in a particle beam using the many instruments at the Nikhef R&D labs. You will then test the chip at the Delft or Groningen facilities that provide a particle beam.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
=== Detector R&D: Studying fast timing detectors ===
 +
 +
Fast timing detectors are the solution for future tracking detectors. In future LHC operation conditions and future colliders, more and more particles are produced per collision. The high particle densities make it increasingly more difficult to separate particle trajectories with the spatial information that current silicon tracking detectors provide. A solution would be to add very precise (in order of 10ps) timestamps to the spatial measurements of the particle trackers. A good understanding of the performance of fast timing detectors is necessary. With the user of a pulsed laser in the lab we study the characteristics of several prototype detectors.
 +
 +
''Contact: [mailto:hella.snoek@.nl Hella Snoek] or [mailto:kazu.akiba@nikhef.nl Kazu Akiba]''
 +
 +
=== Detector R&D: Time resolution of a high voltage monolithic active pixel sensor ===
 +
For the first time, CMOS monolithic active pixel sensors (MAPS), where chip and sensor are integrated, are being used in an experiment at the LHC. Although this is a common technology in industry, it is rather new in the high rate, high radiation environments of high energy particle physics. The ALICE experiment is currently installing such MAPS to which a moderate bias voltage can be applied. You will work in the international RD50 collaboration that works on radiation hard semiconductor devices for very high luminosity colliders, and investigate their MAPS that can be biased to very high voltages to avoid signal degradation after radiation damage. You will be part of the Nikhef R&D group where you will learn about new detector technologies for high energy physics and learn to design a test setup to get a first measurement of time resolution of the RD50 HV-CMOS chip using the many instruments at the Nikhef R&D labs.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
 +
=== Detector R&D: Test beam with a bent ALPIDE monolithic active pixel sensor ===
 +
The ALICE inner tracking system (ITS) 2 is currently being installed at the large hadron collider (LHC) at CERN. This detector makes use of ultra-lightweight monolithic active pixel sensors, the first to use this technology at a particle collider after the STAR experiment at RHIC in Brookhaven. These very thin pixel detectors have a low power consumption, result in very little material in the detector, and still have optimal timing and resolution -- and are a promising technology for future experiments. For the next long shutdown in 2025, an even smaller feature size version of the ALPIDE chip will be used and will be installed by bending larger surfaces of sensor around the beam pipe. Recent test beams at DESY in Hamburg show this yields good results. You will be part of the Nikhef R&D group where you will learn about new detector technologies for high energy physics and learn to design a test setup to characterize the ALPIDE chip using the many instruments at the Nikhef R&D labs. You will work within an international collaboration where you will learn to analyze test beam data. If the travel situation allows, you will have the opportunity to join the ALICE test beam group in Hamburg at DESY to take part in the exciting experience of taking real data.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
=== Detector R&D: Simulating the performance of the ATLAS pixel detector after years of radiation ===
 +
The innermost detector of the ATLAS experiment at the large hadron collider (LHC) that is closest to the beam pipe is the ATLAS pixel detector. The pixel sensors in this area receive the highest amounts of radiation and their performance suffers accordingly. To better understand the effects of radiation damage and to be able to predict the future performance, the pixel sensors are modeled using programs such as technology computer aided design (TCAD) for modeling electric fields that serves as input for programs such as AllPix2 for modeling observables affecting the signal quality such as charge collection efficiency. In this project, you will learn to use TCAD, a tool widely used in the semiconductor industry, to model electric field maps of the sensor, and get an estimate of the uncertainties by comparing the prediction for different models. You will compare your simulations to real data from the ATLAS experiment as well as to data from test beams. You will work in an international environment within the ATLAS collaboration and be part of the Nikhef detector R&D group where you will learn about the newest detector technologies for high energy physics and beyond. Your improved predictions for the performance of the next ATLAS pixel detector will help ATLAS better prepare for future LHC data taking after the installation of this detector in 2025.
 +
 +
''Contact: [mailto:jory.sonneveld@nikhef.nl Jory Sonneveld]''
 +
 +
=== Detector R&D: Laser Interferometer Space Antenna (LISA) ===
 +
The space-based gravitational wave antenna LISA is, without a doubt, one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecraft that are separated by a few million kilometers to measure tiny variations in the distances between test-masses located in each satellite to detect the gravitational waves from sources such as supermassive black holes. The triangular constellation of the LISA mission is dynamic, requiring a constant fine-tuning related to the pointing of the laser links between the spacecraft and a simultaneous refocusing of the telescope. The noise sources related to the laser links expect to provide a dominant contribution to the LISA performance.
 +
An update and extension of the LISA science simulation software are needed to assess the hardware development for LISA at Nikhef, TNO, and SRON. A position is therefore available for a master student to study the impact of instrumental noise on the performance of LISA. Realistic simulations based on hardware (noise) characterization measurements performed at TNO will be carried out and compared to the expected tantalizing gravitational wave sources.
 +
 +
''Contact: [mailto:nielsvb@nikhef.nl Niels van Bakel],[mailto:ernst-jan.buis@tno.nl  Ernst-Jan Buis]''
 +
 +
=== Detector R&D: Spectral X-ray imaging - Looking at colours the eyes can't see ===
 +
When a conventional X-ray image is taken, one acquires an image that only shows intensities. a ‘black and white’ image. Most of the information carried by the photon energy is lost. Lacking spectral information can result in an ambiguity between material composition and amount of material in the sample. If the X-ray intensity as a function of the energy can be measured (i.e. a ‘colour’ X-ray image) more information can be obtained from a sample. This translates to less required dose and/or to a better understanding of the sample that is being investigated. For example, two fields that can benefit from spectral X-ray imaging are mammography and real time CT.
 +
 +
Detectors using Medipix3 chips are used for X-ray imaging. Such a detector is composed of a pixel chip with a semiconductor sensor bonded on top of it. Photoelectric absorption of X-rays in the sensor results in an amount of charge being released that is proportional to the X-ray energy. This charge is registered by a pixel. Depending on configuration, in each pixel 1, 2, 4 or 8 detection thresholds can be set and so, a number of energy bins can be defined. One of the challenges is to maximise X-ray image quality by minimising effects caused by dispersion in the sensitivity of the pixels. The effects of this dispersion can partly be compensated by applying a specific measurement method in combination with image post processing.
 +
 +
You can work on improving measurement methods and on improving post processing methods. There is flexibility of the planned work depending on the skillset you have. The aim is to get the best X-ray energy resolution over the entire pixel chip. This in turn improves image quality and therefore X-ray CT reconstruction quality.
 +
 +
Important note: Much of this work is to be performed in the laboratory. Because of the corona pandemic it is not sure if it is possible to be physically present for enough of the time for this project. Please contact us to discuss the possibilities.
 +
 +
Please see the following videos for examples of our work:
 +
 +
https://youtu.be/cgwQvjfUYns
 +
 +
https://youtu.be/tf9ZLALPVNY
 +
 +
https://youtu.be/vjPX7SxvSUk
 +
 +
https://youtu.be/LqjNVSm7Hoo
 +
 +
''Contact: [mailto:martinfr@nikhef.nl Martin Fransen],[mailto:navritb@nikhef.nl Navrit Bal]''
 +
 +
=== Detector R&D: Holographic projector ===
 +
 +
A difficulty in projecting holograms (based on the interference of light) is the required dense pixel pitch of a projector. One would need a pixel pitch of less than 200 nanometer. With larger pixels artefacts occur due to spatial under sampling. A pixel pitch of 200 nanometer is difficult, if not, impossible, to achieve, especially for larger areas. Another challenge is the massive amount of computing power that would be required to control such a dense pixel matrix.
 +
 +
A new holographic projection method has been developed that reduces under sampling artefacts for projectors with a ‘low’ pixel density. It uses 'pixels' at random but known positions, resulting in an array of (coherent) light points that lacks (or has suppressed) spatial periodicity. As a result a holographic projector can be built with a significantly lower pixel density and correspondingly less required computing power. This could bring holography in reach for many applications like display, lithography, 3D printing, metrology, etc...
 +
 +
Of course, nothing comes for free: With less pixels, holograms become noisier and the contrast will be reduced (not all light ends up in the hologram). The questions: How does the quality of a hologram depend on pixel density? How do we determine projector requirements based on requirements for hologram quality?
 +
 +
Requirements for a hologram can be expressed in terms of: Noise, contrast, resolution, suppression of under sampling artefacts, etc..
 +
 +
For this project we have built a proof of concept holographic emitter. This set-up will be used to verify simulation results (and also to project some cool holograms of course ;-).
 +
 +
Examples of what you could be working on:
 +
 +
a. Calibration/characterisation of the current projector and compensation of systematic errors.
 +
 +
b. To realize a phased array of randomly placed light sources the pixel matrix of the projector must be ‘relayed’ onto a mask with apertures at random but precisely known positions. Determine the best possible relaying optics and design an optimized mask accordingly. Factors like deformation of the projected pixel matrix and limitations in resolving power of the lens system must be taken into account for mask design.
 +
 +
Important note: Much of this work is to be performed in the laboratory. Because of the corona pandemic it is not sure if it is possible to be physically present for enough of the time for this project. Please contact me to discuss the possibilities. 
 +
 +
''Contact: [mailto:martinfr@nikhef.nl Martin Fransen]''
 +
 +
=== Theory: The Effective Field Theory Pathway to New Physics at the LHC ===
 +
A promising framework to parametrise in a robust and model-independent way deviations from the Standard Model (SM) induced by new heavy particles is the Standard Model Effective Field Theory (SMEFT). In this formalism, beyond the SM effects are encapsulated in higher-dimensional operators constructed from SM fields respecting their symmetry properties. In this project, we aim to carry out a global analysis of the SMEFT from high-precision LHC data, including Higgs boson production, flavour observables, and low-energy measurements. This analysis will be carried out in the context of the recently developed SMEFiT approach [1] based on Machine Learning techniques to efficiently explore the complex theory parameter space. The ultimate goal is either to uncover glimpses of new particles or interactions at the LHC, or to derive the most stringent model-independent bounds to date on general theories of New Physics. Of particular interest are novel methods for charting the parameter space [2], the matching to UV-complete theories in explicit BSM scenarios [3], and the interplay between EFT-based model-independent searches for new physics and determinations of the proton structure from LHC data [4].
 +
 +
[1] https://arxiv.org/abs/1901.05965
 +
[2] https://arxiv.org/abs/1906.05296
 +
[3] https://arxiv.org/abs/1908.05588
 +
[4] https://arxiv.org/abs/1905.05215
 +
 +
''Contact: [mailto:j.rojo@vu.nl Juan Rojo]''
 +
 +
=== Theory: Charting the quark and gluon structure of protons and nuclei with Machine Learning ===
 +
Deepening our knowledge of the partonic content of nucleons and nuclei [1] represents a central endeavour of modern high-energy and nuclear physics, with ramifications in related disciplines such as astroparticle physics. There are two main scientific drivers motivating these investigations of the partonic structure of hadrons. On the one hand, addressing fundamental open issues in our understanding in the strong interactions such as the origin of the nucleon mass, spin, and transverse structure; the presence of heavy quarks in the nucleon wave function; and the possible onset of novel gluon-dominated dynamical regimes. On the other hand, pinning down with the highest possible precision the substructure of nucleons and nuclei is a central component for theoretical predictions in a wide range of experiments, from proton and heavy ion collisions at the Large Hadron Collider to ultra-high energy neutrino interactions at neutrino telescopes. The goal of this project is to exploit Machine Learning and Artificial Intelligence tools [2,3] (neural networks trained by stochastic gradient descent) to pin down the quark and gluon substructure of protons and nuclei by using recent measurements from proton-proton and proton-lead collisions at the LHC. Topics of special interest are i) the strange content of protons and nuclei, ii) parton distributions at higher-orders in the QCD couplings for precision Higgs physics, iii) the interplay between jet, photon, and top quark production data to pin down the large-x gluon, and iv) charm quarks as a probe of gluon shadowing at small-x. The project also involves developing projects for the Electron-Ion Collider (EIC), a new lepton-nucleus experiment to start operations in the next years.
 +
 +
[1] https://arxiv.org/abs/1910.03408
 +
[2] https://arxiv.org/abs/1904.00018
 +
[3] https://arxiv.org/abs/1706.00428
 +
 +
''Contact: [mailto:j.rojo@vu.nl Juan Rojo]''
 +
 +
=== Theory: Machine learning for Electron Microscopy for next-generation materials ===
 +
Machine Learning tools developed and applied for particle physics hold great potential for applications in material science, in particular concerning faithful uncertainty estimation and model training for large parameter spaces. In this project, carried out in collaboration with the group of Dr. Sonia Conesa-Boj from the Kavli Institute Nanoscience Delft, http://www.conesabojlab.tudelft.nl, we will  develop and deploy ML tools for data analysis in Electron Microscopy. We will focus on pinning down the properties of novel quantum materials such as topological insulators and van der Waals materials. Examples of possible applications include model-independent background subtraction in electron-energy loss spectroscopy, automatic classification of crystalline structures, and enhancing spatial and spectral resolution using convolutional networks.
 +
 +
''Contact: [mailto:j.rojo@vu.nl Juan Rojo]''
 +
 +
===Theory: The electroweak phase transition and baryogenesis/gravitational wave production ===
 +
 +
In extensions of the Standard Model the electroweak phase transition can be first order and proceed via the nucleation of bubbles. Colliding bubbles can produce gravitational waves [1] and plasma particles interacting with the bubbles can generate a matter-antimatter asymmetry [2]. A detailed understanding of the dynamics of the phase transitions is needed to accurately describe these processes.  One project is to study QFT at finite temperature and compare/apply methods that address the non-perturbative IR dynamics of the thermal processes [3,4].  Another project is to calculate the velocity by which the bubbles expand, which is an important parameter for gravitational waves production and baryogensis. This entails among other things tunneling dymamics, (thermal) scattering rates and Boltzmann equations [5].
 +
 +
[1]https://arxiv.org/abs/1705.01783
 +
[2]https://arxiv.org/pdf/hep-ph/0609145.pdf
 +
[3]https://arxiv.org/pdf/1609.06230.pdf
 +
[4]https://arxiv.org/pdf/1612.00466.pdf
 +
[5]https://arxiv.org/pdf/1809.04907.pdf
 +
 +
''Contact: [mailto:mpostma@nikhef.nl Marieke Postma]''
 +
 +
===Theory: Cosmology of the QCD axion ===
 +
 +
The QCD axion provides an elegant solution to the strong CP problem in QCD[1]. This project focus on the cosmological dynamics of this hypothesized axion field, and in particular the possibility that it can both produce the observed matter-antimatter asymmetry and dark matter abundance in our universe [2,3].
 +
 +
[1]https://arxiv.org/abs/1812.02669
 +
[2]https://arxiv.org/pdf/hep-ph/0609145.pdf
 +
[3]https://arxiv.org/pdf/1910.02080.pdf
 +
 +
''Contact: [mailto:mpostma@nikhef.nl Marieke Postma]''
 +
 +
===Theory: Neutrinos, hierarchy problem and cosmology ===
 +
 +
The electroweak hierachy problem is absent if the quadratic term in the Higgs potential is generated dynamically. This is achieved in 'the neutrino option' [1] where the Higgs potential stems exclusively from quantum effects of heavy right-handed neutrinos, which can also generate the mass pattern of the oberved left-handed neutrinos.  The project focusses on model building aspects (e.g. [2]) and the cosmology (e.g. leptogenesis [3]) of these set-ups.
 +
 +
[1] https://arxiv.org/pdf/1703.10924.pdf
 +
[2] https://arxiv.org/pdf/1807.11490.pdf
 +
[3] https://arxiv.org/pdf/1905.12642.pdf
 +
 +
''Contact: [mailto:mpostma@nikhef.nl Marieke Postma]''
 +
 +
=== KM3NeT: Reconstruction of first neutrino interactions in KM3NeT ===
 +
 +
The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In this project the available data will be used together with simulations to best reconstruct the event topologies and optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector and with this pave the path towards accurate neutrino oscillation measurements and neutrino astronomy.
 +
 +
Programming skills are essential, mostly root and C++ will be used.
 +
''Contact: [mailto:bruijn@nikhef.nl Ronald Bruijn] [mailto:dosamtnikhef.nl Dorothea Samtleben]'''
 +
 +
=== KM3NeT: Searching for New Heavy Neutrinos ===
 +
 +
In this project we will be searching for a new heavy neutrino, looking at signatures created by atmospheric neutrinos interacting in the detector volume of KM3NeT-ORCA. The aim of this project is to study a specific event topology which appears as double blobs of signals detected separately by densely instrumented ORCA detector units. We will be exploiting the tau reconstruction algorithms to verify the possibility of ORCA to detect such signals and to estimate the potential sensitivity of the experiment as well. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (and possibly C++) and ROOT are advantageous but not mandatory.
 +
 +
''Contact: [mailto:suzanbp@nikhef.nl Suzan B. du Pree] [mailto:dveijk@nikhef.nl Daan van Eijk]''
 +
 +
=== KM3NeT: Dark Matter with KM3NeT-ORCA ===
 +
 +
Dark Matter is thought to be everywhere (we should be swimming through it), but we have no idea what it is. Using the good energy and angular resolutions of the KM3NeT neutrino telescope, we can search for Dark Matter signatures that originate from the center of our galaxy. In this project, we will search for such signatures using the reconstructed track and shower events with the KM3NeT-ORCA detector to discover relatively light Dark Matter particles. Since this year, the KM3NeT-ORCA  experiment has 6 detection lines under the Mediterranean Sea: fully operational and continuously taking data. Using the available data, it is possible to compare data and simulation for different event topologies and to estimate the experiment's sensitivity. The project is suitable for a student who is interested to explore new physics scenarios and willing to develop new skills. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (possibly C++) and ROOT data analysis tool are advantageous but not mandatory.
 +
 +
''Contact: [mailto:suzanbp@nikhef.nl Suzan B. du Pree] [mailto:dveijk@nikhef.nl Daan van Eijk]''
 +
 +
 +
=== Gravitational Waves: Unraveling the structure of neutron stars with gravitational wave observations ===
 +
 +
Neutron stars were first discovered more than half a century ago, yet their detailed internal structure largely remains a mystery. A range of theoretical models have been put forward for the neutron star "equation of state", but until recently there was no real way to test them. The direct detection of gravitational waves with LIGO and Virgo has the potential to remedy the situation. When two neutron stars spiral towards each other, they get tidally deformed in a way that is determined by the equation of state, and these deformations get imprinted upon the shape of the gravitational wave that gets emitted. After the first gravitational wave observation of such an event in 2017, several equation of state models could already be ruled out. With expected upgrades of the detectors, we will at some point have access not only to the "inspiral" of binary neutron stars, but to the merger itself, and what happens afterwards. The project will consist of using results from large-scale numerical simulations to come up with a heuristic model for the waveform that describes the inspiral-merger-postmerger process with sufficient accuracy given expected detector sensitivities, and to develop data analysis techniques to efficiently use this model to extract information about the neutron star equation of state.
 +
 +
''Contact: [mailto:vdbroeck@nikhef.nl Chris Van Den Broeck]''
 +
 +
 +
=== Gravitational Waves: Searches for gravitational waves from compact binary coalescence ===
 +
Searches for gravitational waves from the mergers of black holes and neutron stars have been extraordinarily successful in the last four years. We are now beginning to study a population of heavy stellar-mass black holes in detail, including understanding how these systems came to form and whether they are consistent with general relativity. Additionally, the detection of binary neutron star mergers is allowing us to probe their extreme matter. However, we’ve only just scratched the surface of possible signals and the new physics they’d allow us to study. The detection of highly spinning and precessing systems would allow us to perform black hole population statistics to an extraordinary degree of accuracy. Detection of sub-solar mass systems would provide evidence of dark matter. However, these searches are difficult because they require us to work in high-dimensional spaces and develop new statistical methods. There are possibilities for several projects that involve the development and implementation of these new searches as well as the interpretation of the results, particularly in terms of the physics describing compact binary mergers.
 +
 +
''Contact: [mailto:physarah@gmail.com Sarah Caudill]''
 +
 +
 +
=== Gravitational Waves: Computer modelling to design the laser interferometers for the Einstein telescope ===
 +
 +
A new field of instrument science led to the successful detection of gravitational waves by the LIGO detectors in 2015. We are now preparing the next generation of gravitational wave observatories, such as the Einstein Telescope, with the aim to increase the detector sensitivity by a factor of ten, which would allow, for example, to detect stellar-mass black holes from early in the universe when the first stars began to form. This ambitious goal requires us to find ways to significantly improve the best laser interferometers in the world.
 +
 +
Gravitational wave detectors, such as LIGO and VIRGO, are complex Michelson-type interferometers enhanced with optical cavities. We develop and use numerical models to study these laser interferometers, to invent new optical techniques and to quantify their performance. For example, we synthesize virtual mirror surfaces to study the effects of higher-order optical modes in the interferometers, and we use opto-mechanical models to test schemes for suppressing quantum fluctuations of the light field. We can offer several projects based on numerical modelling of laser interferometers. All projects will be directly linked to the ongoing design of the Einstein Telescope.
 +
 +
''Contact: [mailto:a.freise@nikhef.nl Andreas Freise]''
 +
 +
 +
=== Gravitational Waves: Digging away the noise to find the signal ===
 +
 +
Gravitational Wave interferometers are extremely sensitive, but suffer
 +
from instrumental issues that produce noise that mimics astrophysical
 +
signals. This needs to be solved as much as possible before the data
 +
analysis. The problem is that  instrumentalists don't know about
 +
analysis pipelines, and data analysts don't know about experimental
 +
details. We need your help to bridge the gap. This is a good opportunity
 +
to learn about both sides and contribute directly to a booming
 +
international field. We have several tools and new ideas for correlating
 +
noises with the state of the instrument. These need to be developed
 +
further, used on years of data, and written up. Will require Python,
 +
signal processing and statistics.
 +
 +
''Contact: [mailto:swinkels@nikhef.nl Bas Swinkels] and [mailto:physarah@gmail.com Sarah Caudill]''
 +
 +
 +
=== Gravitational Waves: Machine Learning techniques for GW Interferometers ===
 +
The control of suspended optical cavities in the non linear regime. 
 +
Gravitational Wave interferometers are extremely sensitive, however suffer from a very small control range, causing unlocks,
 +
reducing the robustness of these instruments.
 +
In this project we will use a table top replica of a suspended optical cavity,
 +
located in the new R&D laser lab at Nikhef, for the development of a neural
 +
network to construct the positions from free falling mirror by using beam
 +
images. A database with simulated beam images can be used to train
 +
various neural networks before deployment in the table top experiment.
 +
We are looking for a hands-on and enthusiastic master student, interested
 +
in machine learning and experienced in programming languages like Python.
 +
Contacts: Rob Walet, Frank Linde
 +
 +
''Contact: [mailto:r.walet@nikhef.nl Rob Walet] and [mailto:f.l.linde@gmail.com Frank Linde]''
 +
 +
=== VU LaserLaB: Measuring the electric dipole moment (EDM) of the electron ===
 +
 +
In collaboration with Nikhef and the Van Swinderen Institute for Particle Physics and Gravity at the University of Groningen, we have recently started an exciting project to measure the electric dipole moment (EDM) of the electron in cold beams of barium-fluoride molecules. The eEDM, which is predicted by the Standard Model of particle physics to be extremely small, is a powerful probe to explore physics beyond this Standard Model. All extensions to the Standard Model, most prominently supersymmetry, naturally predict an electron EDM that is just below the current experimental limits. We aim to improve on the best current measurement by at least an order of magnitude. To do so we will perform a precision measurement on a slow beam of laser-cooled BaF molecules. With this low-energy precision experiment, we test physics at energies comparable to those of LHC!
 +
 +
At LaserLaB VU, we are responsible for building and testing a cryogenic source of BaF molecules. The main parts of this source are currently being constructed in the workshop. We are looking for enthusiastic master students to help setup the laser system that will be used to detect BaF. Furthermore, projects are available to perform simulations of trajectory simulations to design a lens system that guides the BaF molecules from the exit of the cryogenic source to the experiment.
 +
 +
''Contact: [mailto:H.L.Bethlem@vu.nl Rick Bethlem]''
 +
 +
=== VU LaserLaB: Physics beyond the Standard model from molecules ===
 +
 +
Our team, with a number of staff members (Ubachs, Eikema, Salumbides, Bethlem, Koelemeij) focuses on precision measurements in the hydrogen molecule, and its isotopomers. The work aims at testing the QED calculations of energy levels in H2, D2, T2, HD, etc. with the most precise measurements, where all kind of experimental laser techniques play a role (cw and pulsed lasers, atomic clocks, frequency combs, molecular beams). Also a target of studies is the connection to the "Proton size puzzle", which may be solved  through studies in the hydrogen molecular isotopes.
 +
 +
In the past half year we have produced a number of important results that are described in
 +
the following papers:
 +
* Frequency comb (Ramsey type) electronic  excitations in the  H2 molecule:
 +
see: Deep-ultraviolet frequency metrology of H2 for tests of molecular quantum theory
 +
http://www.nat.vu.nl/~wimu/Publications/Altmann-PRL-2018.pdf
 +
* ''Precision measurement of an infrared transition in the HD molecule''
 +
see: Sub-Doppler frequency metrology in HD for tests of fundamental physics: https://arxiv.org/abs/1712.08438
 +
* ''The first precision study in molecular tritium T2''
 +
see: Relativistic and QED effects in the fundamental vibration of T2:  http://arxiv.org/abs/1803.03161
 +
* ''Dissociation energy of the hydrogen molecule at 10^-9 accuracy'' paper submitted to Phys. Rev. Lett.
 +
* ''Probing QED and fundamental constants through laser spectroscopy of vibrational transitions in HD+''
 +
This is also a study of the hydrogen molecular ion HD+, where important results were  obtained not so long ago, and where we have a strong activity: http://www.nat.vu.nl/~wimu/Publications/ncomms10385.pdf
 +
 +
These five results mark the various directions we are pursuing, and in all directions we aim at obtaining improvements. Specific projects with students can be defined; those are mostly experimental, although there might be some theoretical tasks, like performing calculations of hyperfine structures.
 +
''Contact: [mailto:w.m.g.ubachs@vu.nl Wim Ubachs] [mailto:k.s.e.eikema@vu.nl Kjeld Eikema] [mailto:h.l.bethlem@vu.nl Rick Bethlem]''
 +
 
== 2019: ==
 
== 2019: ==
 +
 +
=== Dark Matter: XENON1T Data Analysis ===
 +
The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently building the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the data from the XENON1T detector. The work will consist of understanding the detector signals and applying machine learning tools such as deep neutral networks to improve the reconstruction performance in our Python-based analysis tool, following the approach described in arXiv:1804.09641. The final goal is to improve the energy and position reconstruction uncertainties for the dark matter search. There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.
 +
 +
''Contact: [mailto:decowski@nikhef.nl Patrick Decowski] and [mailto:z37@nikhef.nl Auke Colijn]''
 +
 +
 
=== Theory: The Effective Field Theory Pathway to New Physics at the LHC ===
 
=== Theory: The Effective Field Theory Pathway to New Physics at the LHC ===
  
Line 210: Line 1,184:
  
 
''Contact: [mailto:w.m.g.ubachs@vu.nl Wim Ubachs] [mailto:k.s.e.eikema@vu.nl Kjeld Eikema] [mailto:h.l.bethlem@vu.nl Rick Bethlem]''
 
''Contact: [mailto:w.m.g.ubachs@vu.nl Wim Ubachs] [mailto:k.s.e.eikema@vu.nl Kjeld Eikema] [mailto:h.l.bethlem@vu.nl Rick Bethlem]''
 
 
 
 
  
 
== 2018: ==
 
== 2018: ==
Line 518: Line 1,488:
 
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.  
 
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.  
  
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou and Paul Kuijer]''
+
''Contact: [mailto:Panos.Christakoglou@nikhef.nl Panos Christakoglou]''
  
 
=== DR&D : Medical X-ray Imaging ===
 
=== DR&D : Medical X-ray Imaging ===
Line 651: Line 1,621:
 
When two atomic nuclei, moving in opposite directions, collide off- center then the Quark Gluon Plasma (QGP) created in the overlap zone is expected to rotate. The nucleons not participating in the collision represent electric currents generating an intense magnetic field. The magnetic field could be as large as 10^{18} gauss, orders of magnitude larger than the strongest magnetic fields found in astronomical objects. Proving the existence of the rotation and/or the magnetic field could be done by checking if particles with spin are aligned with the rotation axis or if charged particles have different production rates relative to the direction of the magnetic field. In particular, the longitudinal and transverse polarisation of the Lambda^0 baryon will be studied. This project requires some affinity with computer programming.  
 
When two atomic nuclei, moving in opposite directions, collide off- center then the Quark Gluon Plasma (QGP) created in the overlap zone is expected to rotate. The nucleons not participating in the collision represent electric currents generating an intense magnetic field. The magnetic field could be as large as 10^{18} gauss, orders of magnitude larger than the strongest magnetic fields found in astronomical objects. Proving the existence of the rotation and/or the magnetic field could be done by checking if particles with spin are aligned with the rotation axis or if charged particles have different production rates relative to the direction of the magnetic field. In particular, the longitudinal and transverse polarisation of the Lambda^0 baryon will be studied. This project requires some affinity with computer programming.  
  
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou], [mailto:Paul.Kuijer@nikhef.nl P. Kuijer]''
+
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou]''
  
 
=== ALICE: Forward Particle Production from the Color Glass Condensate ===  
 
=== ALICE: Forward Particle Production from the Color Glass Condensate ===  
Line 658: Line 1,628:
 
The goal of heavy-ion physics is to study the Quark Gluon Plasma (QGP), a hot and dense medium where quarks and gluons move freely over large distances, larger than the typical size of a hadron. Hydrodynamic simulations expect that the QGP will expand under its own pressure, and cool while expanding. These simulations are particularly successful in describing some of the key observables measured experimentally, such as particle spectra and elliptic flow. A reasonable reproduction of the same observables is also achieved with models that use parameterisations that resemble the hydrodynamical evolution of the system assuming a given freeze-out scenario, usually referred to as blast-wave models. The goal of this project is to work on different blast wave parametrisations, test their dependence on the input parameters and extend their applicability by including more observables studied in heavy-ion collisions in the global fit.  
 
The goal of heavy-ion physics is to study the Quark Gluon Plasma (QGP), a hot and dense medium where quarks and gluons move freely over large distances, larger than the typical size of a hadron. Hydrodynamic simulations expect that the QGP will expand under its own pressure, and cool while expanding. These simulations are particularly successful in describing some of the key observables measured experimentally, such as particle spectra and elliptic flow. A reasonable reproduction of the same observables is also achieved with models that use parameterisations that resemble the hydrodynamical evolution of the system assuming a given freeze-out scenario, usually referred to as blast-wave models. The goal of this project is to work on different blast wave parametrisations, test their dependence on the input parameters and extend their applicability by including more observables studied in heavy-ion collisions in the global fit.  
  
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou], [mailto:Paul.Kuijer@nikhef.nl P. Kuijer]''
+
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou]''
  
 
=== ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma ===
 
=== ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma ===
Line 668: Line 1,638:
 
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.  
 
Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.  
  
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou], [mailto:Paul.Kuijer@nikhef.nl P. Kuijer]''
+
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou]''
  
 
=== ALICE: Quantum Coherence in Particle Production with Intensity Interferometry ===
 
=== ALICE: Quantum Coherence in Particle Production with Intensity Interferometry ===
Line 678: Line 1,648:
 
When two ions collide, if the impact parameter is not zero, the overlap region is not isotropic. This spatial anisotropy of the overlap region is transformed into an anisotropy in momentum space through interactions between partons and at a later stage between the produced particles. It was recently realized that the overlap region of the colliding nuclei exhibits an irregular shape. These irregularities originate from the initial density profile of nucleons participating in the collision which is not smooth and is different from one event to the other. The resulting higher order flow harmonics (e.g. v3, v4, and v5, usually referred to as triangular, quadrangular, and pentangular flow, respectively) and in particular their transverse momentum dependence are argued to be more sensitive probes than elliptic flow not only of the initial geometry and its fluctuations but also of shear viscosity over entropy density (η/s). The goal of this project is to study v3, v4, and v5 for identified particles in collisions of heavy-ions at the LHC.  
 
When two ions collide, if the impact parameter is not zero, the overlap region is not isotropic. This spatial anisotropy of the overlap region is transformed into an anisotropy in momentum space through interactions between partons and at a later stage between the produced particles. It was recently realized that the overlap region of the colliding nuclei exhibits an irregular shape. These irregularities originate from the initial density profile of nucleons participating in the collision which is not smooth and is different from one event to the other. The resulting higher order flow harmonics (e.g. v3, v4, and v5, usually referred to as triangular, quadrangular, and pentangular flow, respectively) and in particular their transverse momentum dependence are argued to be more sensitive probes than elliptic flow not only of the initial geometry and its fluctuations but also of shear viscosity over entropy density (η/s). The goal of this project is to study v3, v4, and v5 for identified particles in collisions of heavy-ions at the LHC.  
  
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou], [mailto:Paul.Kuijer@nikhef.nl P. Kuijer]''
+
''Contact: [mailto:Panos.Christakoglou@nikhef.nl P. Christakoglou]''
  
 
=== ALICE: A New Detector for Very High-Energy Photons: FoCal ===  
 
=== ALICE: A New Detector for Very High-Energy Photons: FoCal ===  

Latest revision as of 08:52, 14 February 2023

2022

ALICE: The next-generation multi-purpose detector at the LHC

This main goal of this project is to focus on the next-generation multi-purpose detector planned to be built at the LHC. Its core will be a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X0 per layer, with the innermost layers possibly positioned inside the beam pipe. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.

Contact: Panos Christakoglou and Alessandro Grelli and Marco van Leeuwen

ALICE: Searching for the strongest magnetic field in nature

In a non-central collision between two Pb ions, with a large value of impact parameter, the charged nucleons that do not participate in the interaction (called spectators) create strong magnetic fields. A back of the envelope calculation using the Biot-Savart law brings the magnitude of this filed close to 10^19Gauss in agreement with state of the art theoretical calculation, making it the strongest magnetic field in nature. The presence of this field could have direct implications in the motion of final state particles. The magnetic field, however, decays rapidly. The decay rate depends on the electric conductivity of the medium which is experimentally poorly constrained. Overall, the presence of the magnetic field, the main goal of this project, is so far not confirmed experimentally.

Contact: Panos Christakoglou

ALICE: Looking for parity violating effects in strong interactions

Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions, in the presence of a deconfined state, gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, what is called the Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, however further studies are needed to constrain background effects. These highly anticipated results have the potential to reveal exiting, new physics.

Contact: Panos Christakoglou

ALICE: Machine learning techniques as a tool to study the production of heavy flavour particles

There was recently a shift in the field of heavy-ion physics triggered by experimental results obtained in collisions between small systems (e.g. protons on protons). These results resemble the ones obtained in collisions between heavy ions. This consequently raises the question of whether we create the smallest QGP droplet in collisions between small systems. The main objective of this project will be to study the production of charm particles such as D-mesons and Λc-baryons in pp collisions at the LHC. This will be done with the help of a new and innovative technique which is based on machine learning (ML). The student will also extend the studies to investigate how this production rate depends on the event activity e.g. on how many particles are created after every collision.

Contact: Panos Christakoglou and Alessandro Grelli

ATLAS: The Higgs boson's self-coupling

The coupling of the Higgs boson to itself is one of the main unobserved interactions of the Standard Model and its observation is crucial to understand the shape of the Higgs potential. Here we propose to study the 'ttHH' final state: two top quarks and two Higgs bosons produced in a single collision. This topology is yet unexplored at the ATLAS experiment and the project consists of setting up the new analysis (including multivariate analysis techniques to recognise the complicated final state), optimising the sensitivity and including the result in the full ATLAS study of the Higgs boson's coupling to itself. With the LHC data from the upcoming Run-3, we might be able to see its first glimpses!

Contact: Tristan du Pree

ATLAS: The Next Generation

After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays) and advanced analysis techiques (using deep learning methods).

[1]https://atlas.cern/updates/briefing/charming-Higgs-decay

Contact: Tristan du Pree

ATLAS: Searching for new particles in very energetic diboson production

The discovery of new phenomena in high-energy proton–proton collisions is one of the main goals of the Large Hadron Collider (LHC). New heavy particles decaying into a pair of vector bosons (WW, WZ, ZZ) are predicted in several extensions to the Standard Model (e.g. extended gauge-symmetry models, Grand Unified theories, theories with warped extra dimensions, etc). In this project we will investigate new ideas to look for these resonances in a region that is yet unexplored in the data. We will focus on the final states where both vector bosons decay into quarks as they are expected to bring the highest sensitivity [1]. We will try to reconstruct and exploit new ways to identify vector bosons (using machine learning methods) and then tackle the problem of estimating contributions from beyond the Standard Model processes in the tails of the mass distribution.

[1] https://arxiv.org/abs/1906.08589

Contact: Flavia de Almeida Dias

ATLAS top-quark and Higgs-boson analysis combination, and Effective Field Theory interpretation

We are looking for a master student with interest in theory and data-analysis in the search for physics beyond the Standard Model in the top-quark and Higgs-boson sectors.

Your master-project starts just at the right time for preparing the Run-3 analysis of the ATLAS experiment at the LHC. In Run-3 (2022-2026), three times more data becomes available, enabling analysis of rare processes with innovative software tools and techniques.

This project aims to explore the newest strategy to combine the top-quark and Higgs-boson measurements in the perspective of constraining the existence of new physics beyond the Standard Model (SM) of Particle Physics. We selected the pp->tZq and gg->HZ processes as promising candidates for a combination to constrain new physics in the context of Standard Model Effective Field Theory (SMEFT). SMEFT is the state-of-the-art framework for theoretical interpretation of LHC data. In particular, you will study the SMEFT OtZ and Ophit operators, which are not well constrained by current measurements.

Besides affinity with particle physics theory, the ideal candidate for this project has developed python/C++ skills and is eager to learn advanced techniques. You start with a simulation of the signal and background samples using existing software tools. Then, an event selection study is required using Machine Learning techniques. To evaluate the SMEFT effects, a fitting procedure based on the innovative Morphing technique is foreseen, for which the basic tools in the ROOT and RooFit framework are available. The work is carried out in the ATLAS group at Nikhef and may lead to an ATLAS note.

Contact: > Geoffrey Gilles and Wouter Verkerke and Marcel Vreeswijk

ATLAS Machine learning to enhance reconstruction of very rare Higgs decays

Since the Higgs boson discovery in 2012 at the ATLAS experiment, the investigation of the properties of the Higgs boson has been a priority for research at the Large Hadron Collider (LHC). However, there are still a many open questions: Is the Higgs boson the only origin of Electroweak Symmetry Breaking? Is there a mechanism which can explain the observed mass pattern of SM particles? Many of these questions are linked to the Higgs boson coupling structure.

While the Higgs boson coupling to fermions of the third generation has been clearly, the investigation of the Higgs boson coupling to the light fermions of the second generation will be a major project for the upcoming data-taking period starting this year. The Higgs boson decay to muons is most sensitive channel to establish a coupling of the Higgs boson to second generation fermions. In this project you will work on an improvement of the H-->mumu search: In about 5% of the events, a photon is radiated off the outgoing muons. By recognizing these photons and taking their effect into account we can improve the reconstruct these events better. For this project we will use machine learning to best identify these special events and to take their energy contribution into account to improve the overall sensitivity.

Contact: Oliver Rieger and Wouter Verkerke and Peter Kluit

ATLAS: Scrutinising Higgs decaying into W bosons

Observation of the Higgs boson happened 10 years ago and since then scientists’ interest has shifted towards measuring precisely its properties. An example is a coupling strength telling us how does the Higgs boson interact with different particles such as W bosons. Measuring H→ WW →lnu lnu process allows us to not only probe the Standard Model (SM), by measuring the coupling strength or indirectly probe Higgs boson width, but also test against the theories beyond (for instance in the context of the effective field theory framework).

The student will take active part in the ATLAS HWW group. There are multiple possible areas of contribution within the group depending on the interest of the student. For instance, utilising machine learning techniques to optimise for the selection of HWW signal process, determining the fake background processes, interpreting the results through the beyond SM theories and others. Contact: Matouš Vozák and Ivo van Vulpen

ATLAS: HGTD detector

The ATLAS is going to get a new ability: a Timing Layer. This allows us to reconstruct tracks not only in the 3 dimensions of space but adds the ability of measuring very precisely also the time (at picosecond level) at which the particles pass the sensitive layers of the HGTD detector. This allow to construct the trajectories of the particles created at the LHC in 4 dimensions and ultimately will lead to a better reconstruction of physics at ATLAS. The new HGTD detector is still in construction and work needs to be done on different levels such as understanding the detector response (taking measurements in the lab and performing simulations) or developing algorithms to reconstruct the particle trajectories (programming and analysis work). With this work you will be part of the Atlas group and/or the Fast Timing detector group together with the R&D department at Nikhef.

Contact me to discuss the possibilities. Contact: Hella Snoek

Dark Matter: Building better Dark Matter Detectors - the XAMS R&D Setup

The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 0.5kg of ultra-pure liquid xenon in the central volume. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matter experiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data themselves You will "own" this experiment.

Contact: Patrick Decowski and Auke Colijn

Dark Matter: Searching for Dark Matter Particles - XENONnT Data Analysis

The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently operating the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the new data coming from the XENONnT detector. The work will consist of understanding the detector signals and applying a deep neural network to improve the (gas-) background discrimination in our Python-based analysis tool to improve the sensitivity for low-mass dark matter particles. The work will continue a study started by a recent graduate. There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.

Contact: Patrick Decowski and Auke Colijn

Dark Matter: The Ultimate Dark Matter Experiment - DARWIN Sensitivity Studies

DARWIN is the “ultimate” direct detection dark matter experiment, with the goal to reach the so-called “neutrino floor”, when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2027, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN. We are also working on a “fast simulation” that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills.

Contact: Tina Pollmann, Patrick Decowski or Auke Colijn

Dark Matter: Sensitive tests of wavelength-shifting properties of materials for dark matter detectors

Rare event search experiments that look for neutrino and dark matter interactions are performed with highly sensitive detector systems, often relying on scintillators, especially liquid noble gases, to detect particle interactions. Detectors consist of structural materials that are assumed to be optically passive, and light detection systems that use reflectors, light detectors, and sometimes, wavelength-shifting materials. MSc theses are available related to measuring the efficiency of light detection systems that might be used in future detectors. Furthermore, measurements to ensure that presumably passive materials do not fluoresce, at the low level relevant to the detectors, can be done. Part of the thesis work can include Monte Carlo simulations and data analysis for current and upcoming dark matter detectors, to study the effect of different levels of desired and nuisance wavelength shifting. In this project, students will acquire skills in photon detection, wavelength shifting technologies, vacuum systems, UV and extreme-UV optics, detector design, and optionally in Python and C++ programming, data analysis, and Monte Carlo techniques.

Contact: Tina Pollmann and Patrick Decowski

Detector R&D: Time resolution of ultrathin monolithic timing detectors

For the upgrade of ALICE and LHCb vertex detectors, new silicon pixel detectors are being developed now that can register the passing particles with a time precision of tens of picoseconds. ALICE is the first experiment at the LHC to have installed monolithic sensors where electronics is integrated into the sensor. New prototypes of their sensors have arrived at Nikhef. New prototypes of other sensors able to withstand very high radiation fluences of the LHC are arriving soon. In this project, you will tackle the challenge to accurately measure the time resolution of one of these sensors with our laser setups in the laboratory. You will have the chance to work in an international collaboration where you will report about the performance of these novel sensors. There may even be an opportunity to join beam tests at CERN. For this project, we are looking for someone who is interested to work with high-tech sensors and equipment in our Nikhef laboratory and with python programming skills.

Contact: Jory Sonneveld

Detector R&D: Performance of monolithic sensors for the ALICE upgrade from test beam data

For the upgrade of the ALICE detector, ultrathin picosecond timing integrated sensors are being developed now, of which the first prototypes are now at Nikhef and are being studied in test beams at CERN and DESY in Hamburg. Sensors are studied with the ALPIDE (ALICE PIxel DEtector) telescope that uses the same sensors that have recently installed in the heart of the ALICE experiment at CERN. In this project, you will analyze data from beam tests to measure the efficiency and time resolution of the new prototypes for the ALICE upgrade with the latest data from test beams at CERN. If the travel situation allows, you will have the opportunity to join the ALICE test beam group at CERN or in Hamburg at DESY to take part in the exciting experience of taking real data. We are looking for someone with good programming and data analysis skills.

Contact: Jory Sonneveld

Detector R&D: Modeling radiation damage in silicon sensors

In the coming years, the ATLAS experiment at the LHC works on upgrades to prepare for the high-luminosity LHC, where many more collisions will take place than today. Both analysis of data and decisions made in preparation of these detectors and on data taking heavily rely on simulations, especially those that model the damage done to sensors after many collisions. It may sound counterintuitive, but particle detectors do not actually like particles: after many collisions at the LHC, a silicon pixel detector has seen so many particles that its bulk gathers defects. Charge generated by traversing particles can get trapped in defects resulting in less charge induced in the readout electrodes, reducing detector performance in resolution and efficiency. In this project, you will be a member of the international ATLAS collaboration where you will compare different models of radiation damage with measured data. You will learn technology computer aided design (TCAD), widely used in industry, and contribute to the open source program Allpix Squared that is widely used for simulations in many areas of particle physics. Here we are looking for someone with good programming and data analysis skills who would like to contribute to upgrades of collider experiments.

Contact: Jory Sonneveld

Detector R&D: Fast trigger

Muons in cosmic rays are for free! In this project we are not looking for where cosmic rays come from or what physics can be studied with them. Instead, we are using them to test some of our particle detectors. Muons are short lived particles that carry the same charge as electrons, have a high penetrating power and can be detected relatively easy. In practice a test set-up consists of a ‘trigger’ and a device under test. The ‘trigger’ is a detector that gives a signal when a muon passes by, which is a signal to check the result in the device under test. Did the device under test respond to the muon in the expected way?

For the planned upgrades of particle detectors at CERN, for LHC experiments (LHCb, ATLAS, ALICE, CMS), new particle detectors are under development. Some of these new detectors must be able to measure within tens of ps (10e-12 s) precise when a particle was detected.

To facilitate testing these new detectors by using muons we need a trigger set up with a matching precision in timing (order tens of ps). We want to investigate several potentially interesting technologies to develop such a fast trigger. In one scenario the trigger could be based on the use of Cherenkov light. Cherenkov light is generated when a charged particle traverses a medium faster than the speed of light in that medium. This light can be generated in for example plexiglass, which in turn can be mounted on top of a light sensor. In our case the light sensor could be a so called silicon photo multiplier, which is capable of detecting only a few photons and gives a signal within a few hundred ps. Another possible scenario would be to use a so called LGAD (Low Gain Avalanche Diode) to measure the signal that a muon generates as it traverses the sensor.

The Question(s): Which technology should we use for a fast trigger and what is the best timing precision that we can achieve?

This project will involve a lot of 'hands on work' in the lab.

Contact: Martin Fransen and Jory Sonneveld

Detector R&D: Characterisation of Trench Isolated Low Gain Avalanche Detectors (TI-LGAD)

The future vertex detector of the LHCb Experiment needs to measure the spatial coordinates and time of the particles originating in the LHC proton-proton collisions with resolutions better than 10 um and 50 ps, respectively. Several technologies are being considered to achieve these resolutions. Among those is a novel sensor technology called Trench Isolated Low Gain Avalanche Detector. Prototype pixelated sensors have been manufactured recently and have to be characterised. Therefore these new sensors will be bump bonded to a Timepix4 ASIC which provides charge and time measurements in each of 230 thousand pixels. Characterisation will be done using a lab setup at Nikhef, and includes tests with a micro-focused laser beam, radioactive sources, and possibly with particle tracks obtained in a test-beam. This project involves data taking with these new devices and analysing the data to determine the performance parameters such as the spatial and temporal resolution. as function of temperature and other operational conditions.

Contacts: Kazu Akiba and Martin van Beuzekom

Detector R&D: Simulation of 3D silicon sensors

For the upgrade of the vertex detector of the LHCb experiment novel silicon pixel detectors have to be developed that can register the passing particles with a time precision of tens of picoseconds. Given the harsh radiation environment very close to the LHCb interaction point only a limited number of technologies can be applied. One of the most promising technologies are the so-called 3D sensors whose readout electrodes are pillars that are placed into the sensor perpendicular to the surface; this in contrast to ’standard’ planar silicon sensors where the pixel electrodes are at the surface, similar to the camera in your smartphone. To understand the time response of these 3D sensors, simulations with TCAD software have to be performed and the results will be compared to measured data. These simulations involve the creation/adaptation of the 3D structures of the model, optimising the simulation speed, and analysing the signals as function voltage, track impact point and deposited charge. Hands-on experience with such 3D sensors in the R&D labs at Nikhef is planned within the scope of this project.

Contacts: Martin van Beuzekom and Kazu Akiba

Detector R&D: Laser Interferometer Space Antenna (LISA) - Wavefront sensors for gravitational wave detection

The space-based gravitational wave antenna LISA is one of the most challenging space missions ever proposed. ESA plans to launch around 2034 three spacecraft separated by a few million kilometres. This constellation measures tiny variations in the distances between test-masses located in each satellite to detect gravitational waves from sources such as supermassive black holes. LISA is based on laser interferometry, and the three satellites form a giant Michelson interferometer. LISA measures a relative phase shift between one local laser and one distant laser by light interference. The phase shift measurement requires sensitive wavefront sensors. The Nikhef DR&D group fabricated prototype sensors in 2020 together with the Photonics industry and the Dutch institute for space research SRON. Nikhef & SRON are responsible for the Quadrant PhotoReceiver (QPR) system: the sensors, the housing including a complex mount to align the sensors with 10's of nanometer accuracy, various environmental tests at the European Space Research and Technology Centre (ESTEC), and the overall performance of the QPR in the LISA instrument. Currently we are discussing possible sensor improvements for a second fabrication run in 2022, optimizing the mechanics and preparing environmental tests. As a MSc student, you will work on various aspects of the wavefront sensor development: study the performance of the epitaxial stacks of Indium-Gallium-Arsenide, setting up test benches to characterize the sensors and QPR system, performing the actual tests and data analysis, in combination with performance studies and simulations of the LISA instrument.

Contact: Niels van Bakel

FCC: The Next Collider

After the LHC, the next planned large collider at CERN is the proposed 100 kilometer circular collider "FCC". In the first stage of the project, as a high-luminosity electron-positron collider, precision measurements of the Higgs boson are the main goal. One of the channels that will improve by orders of magnitude at this new accelerator is the decay of the Higgs boson to a pair of charm quarks. This project will estimate a projected sensitivity for the coupling of the Higgs boson to second generation quarks, and in particular target the improved reconstruction of the topology of long-lived mesons in the clean environment of a precision e+e- machine.

Contact: Tristan du Pree

LHCb: New physics in the angular distributions of B decays to K*ee

Lepton flavour violation in B decays can be explained by a variety of non-standard model interactions. Angular distributions in decays of a B meson to a hadron and two leptons are an important source of information to understand which model is correct. Previous analyses at the LHCb experiment have considered final states with a pair of muons. Our LHCb group at Nikhef concentrates on a new measurement of angular distributions in decays with two electrons. The main challenge in this measurement is the calibration of the detection efficiency. In this project you will confront estimates of the detection efficiency derived from simulation with decay distributions in a well known B decay. Once the calibration is understood, the very first analysis of the angular distributions in the electron final state can be performed.

Contact: Mara Soares and Wouter Hulsbergen

LHCb: Discovering heavy neutrinos in B decays

Neutrinos are the lightest of all fermions in the standard model. Mechanisms to explain their small mass rely on the introduction of new, much heavier, neutral leptons. If the mass of these new neutrinos is below the b-quark mass, they can be observed in B hadron decays.

In this project we search for the decay of B+ mesons in into an ordinary electron or muon and the yet undiscovered heavy neutrino. The heavy neutrino is expected to be unstable and in turn decay quickly into a charged pion and another electron or muon. The final state in which the two leptons differ in flavour, "B+ to e mu pi", is particularly interesting: It is forbidden in the standard model, such that backgrounds are small. The analysis will be performed within the LHCb group at Nikhef using LHCb run-2 data.

Contact: Lera Lukashenko and Wouter Hulsbergen

LHCb: The exotic 4-quark state X(3872) in exclusive production

The nature of the X(3872) is still unknown. Is it a regular charmonium with an unexpected mass, a compact 4-quark state, or a DD molecule? Or a quantum superposition of all that? Either way, finding out will tell us something about how quark organise in hadrons and colour confinement. The project is to measure a very peculiar production mode: pp->Xpp. Only the X is seen in the detector and nothing else. Data from LHCb run 2 will be used and the analysis will build on previous work.

Contact: Patrick Koppenburg

LHCb: Scintillating Fibre tracker software

The installation of the scintillating-fibre tracker in LHCb’s underground cavern was recently completed. This detector uses 10000 km of fibres to track particle trajectories in the LHCb detector when the LHC starts up again later this year. The light emitted by the scintillating fibres when a particle interacts with them is measured using photon multiplier tubes. The studies proposed for this project will focus on software, and could include writing a framework to monitor the detector output, improving the detector simulation or working on the data processing.

Contact: Emmy Gabriel

LHCb: Vertex detector calibration

In summer 2022 LHCb has started data taking will an almost entirely new detector. At the point closest to the interaction point, the trajectories of charge particles are reconstructed with a so-called silicon pixel detector. The design hit resolution of this detector is about 15 micron. However, to actually reach this resolution a precise calibration of the spatial positions of the silicon sensors needs to be performed. In this project, you will use the first data of the new LHCb detector to perform this calibration and measure the detector performance.

Contact: Wouter Hulsbergen

LHCb: Search for light dark particles

The Standard Model of elementary particles does not contain a proper Dark Matter candidate. One of the most tantalizing theoretical developments is the so-called Hidden Valley models: a mirror-like copy of the Standard Model, with dark particles that communicate with standard ones via a very feeble interaction. These models predict the existence of dark hadrons – composite particles that are bound similarly to ordinary hadrons in the Standard Model. Such dark hadrons can be abundantly produced in high-energy proton-proton collisions, making the LHC a unique place to search for them. Some dark hadrons are stable like a proton, which makes them excellent Dark Matter candidates, while others decay to ordinary particles after flying a certain distance in the collider experiment. The LHCb detector has a unique capability to identify such decays, particularly if the new particles have a mass below ten times the proton mass.

This project assumes a unique search for light dark hadrons that covers a mass range not accessible to other experiments. It assumes an interesting program on data analysis (python-based) with non-trivial machine learning solutions and phenomenology research using fast simulation framework. Depending on the interest, there is quite a bit of flexibility in the precise focus of the project.

Contact: Andrii Usachov

LHCb: Measuring new decays with excited Ds states in semileptonic Bs decays

One of the most striking discrepancies between the Standard Model and measurements are the lepton flavour universality (LFU) measurements with tau decays. At the moment, we have observed an excess of 3-4 sigma in B → Dτν decays. This could point even to a new force of nature! To understand this discrepancy, we need to make further measurements.

There are two very exciting (pun intended) projects to verify these discrepancies. These involve measuring the Bs → Ds2*τν and/or Bs → Ds1*τν decays. These decays with excited states of the Ds meson have not been observed before, and have a unique way of coupling to potential new physics candidates that can only be measured in Bs decays [1].

Another measurement with excited Ds mesons is the decay of Bs → Ds(2317)μν, which has also never been observed before. The Ds(2317) meson is much lighter than it should be according to the theoretical predictions, raising the question if it is actually a molecular state or perhaps a tetraquark. By measuring this semileptonic decay, we can shed some light on its structure [1,2].

[1] https://arxiv.org/abs/1606.09300

[2] https://arxiv.org/abs/1501.03422

Contact: Suzanne Klaver

Neutrinos: Neutrino scattering: the ultimate resolution

Neutrino telescopes like IceCube and KM3NeT aim at detecting neutrinos from cosmic sources. The neutrinos are detected with the best resolution when charged current interactions with nucleons produce a muon, which can be detected with high accuracy (depending on the detector). A crucial ingredient in the ultimate achievable pointing accuracy of neutrino telescopes is the scattering angle between the neutrino and the muon. While published computations have investigated the cross-section of the process in great detail, this important scattering angle has not received much attention. The aim of the project is to compute and characterize the distribution of this angle, and that the ultimate resolution of a neutrino telescope. If successful, the results of this project can lead to publication of interest to the neutrino telescope community.

Depending on your interests, the study could be based on a first-principles calculation (using the deep-inelastic scattering formalism), include state-of-the-art parton distribution functions, and/or exploit existing event-generation software for a more experimental approach.

Contacts: Aart Heijboer

Neutrinos: acoustic detection of ultra-high energy neutrinos

The study of the cosmic neutrinos of energies above 1017 eV, the so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent astrophysical sources, such as gamma ray bursts, supernovae or even dark matter. In addition, the observation of high energy neutrinos may provide a unique tool to study interactions at high energies. The energy deposition of these extreme neutrinos in water induce a thermo-acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope.

The work will be executed at the Nikhef institute and/or the TNO laboratories in Delft. In this project master students have the opportunity to contribute in the following ways:

Project 1: Hardware development on fiber optics hydrophones technology Goal: characterize existing prototype optical fibre hydrophones in an anechoic basin at TNO laboratory. Data collection, calibration, characterization, analysis of consequences for design future acoustic hydrophone neutrino telescopes; Keywords: Optical fiber technology, signal processing, electronics, lab.

Project 2: Investigation of ultra-high energy neutrinos and their interactions with matter. Goal: Discriminate the neutrino signals from the background noises, in particular clicks from whales and dolphins in the deep sea. Study impact on physics reach for future acoustic hydrophone neutrino telescopes; Keywords: Monte Carlo simulations, particle physics, neutrino physics, data analysis algorithms.

Further information: Info on ultra-high energy neutrinos can be found at: http://arxiv.org/abs/1102.3591; Info on acoustic detection of neutrinos can be found at: http://arxiv.org/abs/1311.7588

Contact: Ernst Jan Buis or Ivo van Vulpen

Neutrinos: Oscillation analysis with the first data of KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In this project the available data will be used together with simulations to best reconstruct the event topologies and optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector. The data will then be used to measure neutrino oscillation parameters, and prepare for a future neutrino mass ordering determination.

Programming skills are essential, mostly root and C++ will be used. Contact: Ronald Bruijn Paul de Jong


Neutrinos: the Deep Underground Neutrino Experiment (DUNE)

The Deep Underground Neutrino Experiment (DUNE) is under construction in the USA, and will consist of a powerful neutrino beam originating at Fermilab, a near detector at Fermilab, and a far detector in the SURF facility in Lead, South Dakota, 1300 km away. During travelling, neutrinos oscillate and a fraction of the neutrino beam changes flavour; DUNE will determine the neutrino oscillation parameters to unrivaled precision, and try and make a first detection of CP-violation in neutrinos. In this project, various elements of DUNE can be studied, including the neutrino oscillation fit, neutrino physics with the near detector, event reconstruction and classification (including machine learning), or elements of data selection and triggering.

Contact: Paul de Jong

Neutrinos: Searching for Majorana Neutrinos with KamLAND-Zen

The KamLAND-Zen experiment, located in the Kamioka mine in Japan, is a large liquid scintillator experiment with 750kg of ultra-pure Xe-136 to search for neutrinoless double-beta decay (0n2b). The observation of the 0n2b process would be evidence for lepton number violation and the Majorana nature of neutrinos, i.e. that neutrinos are their own anti-particles. Current limits on this extraordinary rare hypothetical decay process are presented as a half-life, with a lower limit of 10^26 years. KamLAND-Zen, the world’s most sensitive 0n2b experiment, is currently taking data and there is an opportunity to work on the data analysis, analyzing data with the possibility of taking part in a ground-breaking discovery. The main focus will be on developing new techniques to filter the spallation backgrounds, i.e. the production of radioactive isotopes by passing muons. There will be close collaboration with groups in the US (MIT, Berkeley, UW) and Japan (Tohoku Univ). Contact: Patrick Decowski

Cosmic Rays/Neutrinos: Seasonal muon flux variations and the pion/kaon ratio

The KM3NeT ARCA and ORCA detectors, located kilometers deep in the Mediterranean Sea, have neutrinos as primary probes. Muons from cosmic ray interactions reach the detectors in relatively large quantities too. These muons, exploiting the capabilities and location of the detectors allow the study of cosmic rays and their interactions. In this way, questions about their origin, type, propagation can be addressed. In particular these muons are tracers of hadronic interactions at energies inaccessible at particle accelerators.

The muons reaching the depths of the detectors result from decays of mesons, mostly pions and kaons, created in interactions of high-energy cosmic rays with atoms in the upper atmosphere. Seasonal changes of the temperature – and thus density - profile of the atmosphere modulate the balance between the probability for these mesons to decay (producing muons) or to re-interact. Pions and kaons are affected differently, allowing to extract their production ratio by determining how changes in muon rate depend on changes in the effective temperature – an integral over the atmospheric temperature profile weighted by a depth dependent meson production rate.

In this project, the aim is to measure the rate of muons in the detectors and to calculate the effective temperature above the KM3NeT detectors from atmospheric data, both as function of time. The relation between these two can be used to extract the pion to kaon ratio.

Contact: Ronald Bruijn

Gravitational Waves: Computer modelling to design the laser interferometers for the Einstein telescope

A new field of instrument science led to the successful detection of gravitational waves by the LIGO detectors in 2015. We are now preparing the next generation of gravitational wave observatories, such as the Einstein Telescope, with the aim to increase the detector sensitivity by a factor of ten, which would allow, for example, to detect stellar-mass black holes from early in the universe when the first stars began to form. This ambitious goal requires us to find ways to significantly improve the best laser interferometers in the world.

Gravitational wave detectors, such as LIGO and VIRGO, are complex Michelson-type interferometers enhanced with optical cavities. We develop and use numerical models to study these laser interferometers, to invent new optical techniques and to quantify their performance. For example, we synthesize virtual mirror surfaces to study the effects of higher-order optical modes in the interferometers, and we use opto-mechanical models to test schemes for suppressing quantum fluctuations of the light field. We can offer several projects based on numerical modelling of laser interferometers. All projects will be directly linked to the ongoing design of the Einstein Telescope.

Contact: Andreas Freise

Theory: Effective Field Theories of Particle Physics from low- to high-energies

Known elementary matter particles exhibit a surprising three-fold structure. The particles belonging to each of these three “generations” seem to display a remarkable pattern of identical properties, yet have vastly different masses. This puzzling pattern is unexplained. Equally unexplained is the bewildering imbalance between matter and anti-matter observed in the universe, despite minimal differences in the properties of particles and anti-particles. These two mystifying phenomena may originate from a deeper, still unknown, fundamental structure characterised by novel types of particles and interactions, whose unveiling would revolutionise our understanding of nature. Until recently, it was widely assumed that matter particles from each of the three generations interact with the same (“universal”) strength. This hypothesis is being challenged by new measurements at the Large Hadron Collider (LHC) at CERN, which hint towards non-universal interactions. If confirmed, these measurements will be the first signs of new particles and interactions in high-energy colliders. These exciting findings indicate the urgent need to explore such phenomena in depth. The ultimate goal of particle physics is uncovering a fundamental theory which allows the coherent interpretation of phenomena taking place at all energy and distance scales. In this project, the students will exploit the Effective Field Theory (EFT) formalism, which allows the theoretical interpretation of particle physics data in terms of new fundamental quantum interactions which relate seemingly disconnected processes. Specifically, the goal is to connect measurements from ATLAS and LHCb among them and to jointly interpret this information with that provided by other experiments, from CMS and Belle-II to very low-energy probes such as the anomalous magnetic moment of the muon or electric dipole moments of the electron and neutron.

This project will be based on theoretical calculations in particle physics, numerical simulations in Python, analysis of existing data from the LHC and other experiments, as well as formal developments in understanding the operator structure of effective field theories. This project accommodates several students, who would work together in developing the main formalism while each of them focuses on a specific sub-project. Depending on the student profile, sub-projects with a strong computational and/or machine learning component are also possible.

Subproject #1: SMEFT & Flavour symmetries. While the power of the Standard Model EFT (named SMEFT) framework is its generality and lack of assumptions, the number of operators is somewhat daunting. A popular way to trim the number of operators is to assume flavour symmetries that relate operators with different quark and lepton flavours. In this project you will investigate the theoretical basis for commonly-used flavour symmetries and what they imply for the connection between high-energy observables involving third-generation particles (top and bottom quarks and tau leptons) and low-energy precision tests involving first- and second-generation particles.

Subproject #2: SMEFT & magnetic moment of the muon. The magnetic moment of the muon appears to differ from the Standard Model expectations by a large amount, well beyond the known experimental and theoretical uncertainties. Recent experiments have only strengthened the significance of this anomaly. In this project, the students will investigate the feasibility of implementing the measurement of the magnetic moment of the muon into a global SMEFT analysis, by exploiting recently provided calculations. Special attention will be devoted to the flavour assumptions required to consistently match this measurement with the LHC data. The SMEFiT analysis framework will be used to connect the g-2 data with high-energy LHC measurements.

References: arXiv:2105.00006, https://arxiv.org/abs/1901.05965 , https://arxiv.org/abs/1906.05296 ,  https://arxiv.org/abs/1908.05588,  https://arxiv.org/abs/1905.05215

Contacts: Juan Rojo, Keri Vos, Jordy de Vries

Theory: High-energy neutrino-nucleon interactions at the Forward Physics Facility

High-energy collisions at the High-Luminosity Large Hadron Collider (HL-LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing experiments. The proposed Forward Physics Facility (FPF) to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). High statistics neutrino detection will provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. The FPF has the promising potential to probe our understanding of the strong interactions as well as of proton and nuclear structure, providing access to both the very low-x and the very high-x regions of the colliding protons. The former regime is sensitive to novel QCD production mechanisms, such as BFKL effects and non-linear dynamics, as well as the gluon parton distribution function (PDF) down to x=1e-7, well beyond the coverage of other experiments and providing key inputs for astroparticle physics. In addition, the FPF acts as a neutrino-induced deep-inelastic scattering (DIS) experiment with TeV-scale neutrino beams. The resulting measurements of neutrino DIS structure functions represent a valuable handle on the partonic structure of nucleons and nuclei, particularly their quark flavour separation, that is fully complementary to the charged-lepton DIS measurements expected at the upcoming Electron-Ion Collider (EIC).

In this project, the student(s) will carry out updated predictions for the neutrino fluxes expected at the FPF, assess the precision with which neutrino cross-sections will be measured, and quantify their impact on proton and nuclear structure by means of machine learning tools and state-of-the-art calculations in perturbative Quantum Chromodynamics.

References: arXiv:2109.10905, arXiv:2201.12363 , arXiv:2109.02653

Contacts: Juan Rojo

Theory: Probing the origin of the proton spin with machine learning

At energy-frontier facilities such as the Large Hadron Collider (LHC), scientists study the laws of Nature in their quest for novel phenomena both within and beyond the Standard Model of particle physics. An in-depth understanding of the quark and gluon substructure of protons and heavy nuclei is crucial to address pressing questions from the nature of the Higgs boson to the origin of cosmic neutrinos. The key to address some of these questions is by carrying out an universal analysis of nucleon structure from the simultaneous determination of the momentum and spin distributions of quarks and gluons and their fragmentation into hadrons. This effort requires combining an extensive experimental dataset and cutting-edge theory calculations within a machine learning framework where neural networks parametrise the underlying physical laws while minimizing ad-hoc model assumptions.

In this project, the student(s) will carry out a new global analysis of the spin structure of the proton by means of machine learning tools and state-of-the-art calculations in perturbative Quantum Chromodynamics, and integrate it within the corresponding global NNPDF analyses of unpolarised proton and nuclear structure in the framework of a combined integrated global analysis of non-perturbative QCD.

References: arXiv:2201.12363 , arXiv:2109.02653

Contacts: Juan Rojo



2021

ALICE: The next-generation multi-purpose detector at the LHC

This main goal of this project is to focus on the next-generation multi-purpose detector planned to be built at the LHC. Its core will be a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X0 per layer, with the innermost layers possibly positioned inside the beam pipe. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.

Contact: Panos Christakoglou and Alessandro Grelli and Marco van Leeuwen

ALICE: Searching for the strongest magnetic field in nature

In case of a non-central collision between two Pb ions, with a large value of impact parameter (b), the charged nucleons that do not participate in the interaction (called spectators) create strong magnetic fields. A back of the envelope calculation using the Biot-Savart law brings the magnitude of this filed close to 10^19Gauss in agreement with state of the art theoretical calculation, making it the strongest magnetic field in nature. The presence of this field could have direct implications in the motion of final state particles. The magnetic field, however, decays rapidly. The decay rate depends on the electric conductivity of the medium which is experimentally poorly constrained. Overall, the presence of the magnetic field, the main goal of this project, is so far not confirmed experimentally.

Contact: Panos Christakoglou

ALICE: Looking for parity violating effects in strong interactions

Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions, in the presence of a deconfined state, gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, what is called the Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, however further studies are needed to constrain background effects. These highly anticipated results have the potential to reveal exiting, new physics.

Contact: Panos Christakoglou

ALICE: Machine learning techniques as a tool to study the production of heavy flavour particles

There was recently a shift in the field of heavy-ion physics triggered by experimental results obtained in collisions between small systems (e.g. protons on protons). These results resemble the ones obtained in collisions between heavy ions. This consequently raises the question of whether we create the smallest QGP droplet in collisions between small systems. The main objective of this project will be to study the production of charm particles such as D-mesons and Λc-baryons in pp collisions at the LHC. This will be done with the help of a new and innovative technique which is based on machine learning (ML). The student will also extend the studies to investigate how this production rate depends on the event activity e.g. on how many particles are created after every collision.

Contact: Panos Christakoglou and Alessandro Grelli

ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma

One of the ways to study the quark-gluon plasma that is formed in high-energy nuclear collisions, is using high-energy partons (quarks or gluons) that are produced early in the collision and interact with the quark-gluon plasma as they propagate through it. There are several current open questions related to this topic, which can be explored in a Master's project. For example, we would like to use the new Monte Carlo generator framework JetScape to simulate collisions to see whether we can extract information about the interaction with the quark-gluon plasma. In the project you will collaborate with one of the PhD students or postdocs in our group to use the model to generate predictions of measurements and compare those to data analysis results. Depending on your interests, the project can focus more on the modeling aspects or on the analysis of experimental data from the ALICE detector at the LHC.

Contact: Marco van Leeuwen and Marta Verweij

ALICE: Extreme Rare Probes of the Quark-Gluon Plasma

The quark-gluon plasma is formed in high-energy nuclear collisions and also existed shortly after the big bang. With the large amount of data collected in recent years at the Large Hadron Collider at CERN, rare processes that previously were not accessible provide now new ways to study how the quark-gluon plasma emerges from the fundamental theory of strong interaction. One of such processes is the heavy W boson which in many cases decays to two quarks. The W boson itself doesn’t interact with the quark-gluon plasma because it doesn’t carry color, but the quark decay products do interact with the plasma and therefore provide an ideal tool to study the space-time evolution of this hot and dense medium. In this project you will use data from the ALICE detector at the LHC and simulated data from generators to study various physics mechanisms that could be happening in the real collisions.

Contact: Marta Verweij and Marco van Leeuwen

ALICE: Jet Quenching with Machine Learning

Machine learning applications are rising steadily as a vital tool in the field of data science but are relatively new in the particle physics community. In this project machine learning tools will be used to gain insights into the modification of a parton shower in the quark-gluon plasma (QGP). The QGP is created in high-energy nuclear collisions and only lives for a very short period of time. Highly energetic partons created in the same collisions interact with the plasma while they travers it and are observed as a collimated spray of particles, known as jets, in the detector. One of the key recent insights is that the internal structure of jets provides information about the evolution of the QGP. With data recorded by the ALICE experiment, you will use jet substructure techniques in combination with machine learning algorithms to dissect the structure of the QGP. Machine learning will be used to select the regions of radiation phase space that are affected by the presence of the QGP.

Contact: Marta Verweij and Marco van Leeuwen


ATLAS: Top Spin and EFTs in the Wtb vertex

The top quark has an exceptional high mass, close to the electroweak symmetry breaking scale and therefore sensitive to new physics effects. Theoretically, new physics is well described in the EFT framework [1]. The (EFT) operators are experimentally well accessible in single top t-channel production where the top quark is produced spin polarized. The focus at Nikhef is the operator O_{tW} with a possible imaginary phase, leading to CP violation. Experimentally, many angular distribution are reconstructed in the top rest frame to hunt for these effects. There are several challenging analysis-topics for master students, which can also be tailored a bit your interests: 1) MC study EFT effects from background substraction. 2) NLO reweighting (as function of EFT parameters) based on Madgraph 3) Kinematic Fitter neural network estimation vs analytic as available 4) Pt dependent analysis of existing analysis 5) Make a combination with a higgs channel? (difficult) 6) Make a combination with other top channels? (difficult)

More info in this presentation: www.nikhef.nl/~h73/top_masterstudenten_mrt2021.pptx and/or in the video: https://video.uva.nl/media/t/0_0f2fuazf


[1] https://arxiv.org/abs/1807.03576

Contact: Marcel Vreeswijk [2] and Jordy Degens [3]

ATLAS: The Next Generation

After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays), advanced analysis techiques (using deep learning methods) and expanding the theory interpretation. Another opportunity would be the development of the first statistical combination of results between the ATLAS and CMS experiment, which could significantly improve the discovery potentional.

[1] https://arxiv.org/abs/1802.04329

Contact: Tristan du Pree

ATLAS: The Most Energetic Higgs Boson

The production of Higgs bosons at the highest energies could give the first indications for deviations from the standard model of particle physics, but production energies above 500 GeV have not been observed yet [1]. The LHC Run-2 dataset, collected during the last 4 years, might be the first opportunity to observe such processes, and we have various ideas for new studies. Possible developments include the improvement of boosted reconstruction techniques, for example using multivariate deep learning methods. Also, there are various opportunities for unexplored theory interpretations (using the MadGraph event generator), including effective field theory models (with novel ‘morphing’ techniques) and new interpretations of the newly observed boosted VZ(bb) process.

[1] https://arxiv.org/abs/1709.05543

Contact: Tristan du Pree

ATLAS: Searching for new particles in very energetic diboson production

The discovery of new phenomena in high-energy proton–proton collisions is one of the main goals of the Large Hadron Collider (LHC). New heavy particles decaying into a pair of vector bosons (WW, WZ, ZZ) are predicted in several extensions to the Standard Model (e.g. extended gauge-symmetry models, Grand Unified theories, theories with warped extra dimensions, etc). In this project we will investigate new ideas to look for these resonances in a region that is yet unexplored in the data. We will focus on the final states where both vector bosons decay into quarks as they are expected to bring the highest sensitivity [1]. We will try to reconstruct and exploit the polarisation of the vector bosons (using machine learning methods) and then tackle the problem of estimating contributions from beyond the Standard Model processes in the tails of the mass distribution.

[1] https://arxiv.org/abs/1906.08589

Contact: Flavia de Almeida Dias

ATLAS R&D: Study of LGAD sensors

The Atlas detector has been installed more than a decade ago. Several upgrades of the detector are being worked on that will adapt the ATLAS experiment to the so-called High Luminosity LHC. A new (sub)detector that will be installed and become part of the Atlas detector is the High-Granularity Timing Detector (HGTD) detector. The HGTD will measure very precisely the passage time of particles in the detector and will help identify from which of the plurious proton-proton collisions the particle originates from. The HGTD is partly made of LGAD sensors. These are granulated silicon sensors dedicatedly designed for the HGTD. In this project we will characterise the LGAD sensors.

Contact: Hella Snoek

LHCb: Measuring differences between electrons and muons, beyond the Standard Model

A current “hot topic” in the field of particle physics is the potential violation of lepton-universality. At the LHCb experiment, lepton-universality tests are performed by looking at the ratio of decays into muons and into electrons/taus. Recent measurements in meson modes show hints (2 ? 3?) of lepton non-universality. Baryonic modes, however, have been less studied and provide an independent test of lepton-universality. At Nikhef, we study the decay Lambdab->Lambda l+l- , where l can be an electron or a muon. There are two possible project topics:

1. Identifying novel analysis techniques in the high di-lepton invariant mass region. Electrons in this region undergo more Bremsstrahlung, and therefore have a worse momentum resolution, meaning background from the resonant Psi(2S) mode can leak into our signal. Since we expect most of our signal in this region, it is important to improve this, most likely using machine learning techniques.

2. Identifying, simulating, and setting up a rejection for partially reconstructed Lambdab->Lambda* l+l- backgrounds. By not fully reconstructing the excited Lambda*0, we can mis-reconstruct it as a signal candidate. Machine learning techniques could be explored.

Contact: Lex Greeven and Niels Tuning

LHCb: New physics in the angular distributions of B decays to K*ee

Lepton flavour violation in B decays can be explained by a variety of non-standard model interactions. Angular distributions in decays of a B meson to a hadron and two leptons are an important source of information to understand which model is correct. Previous analyses at the LHCb experiment have considered final states with a pair of muons. Our LHCb group at Nikhef concentrates on a new measurement of angular distributions in decays with two electrons. The main challenge in this measurement is the calibration of the detection efficiency. In this project you will confront estimates of the detection efficiency derived from simulation with decay distributions in a well known B decay. Once the calibration is understood, the very first analysis of the angular distributions in the electron final state can be performed.

Contact: Wouter Hulsbergen and Mara Soares

LHCb: Discovering heavy neutrinos in B decays

Neutrinos are the lightest of all fermions in the standard model. Mechanisms to explain their small mass rely on the introduction of new, much heavier, neutral leptons. If the mass of these new neutrinos is below the b-quark mass, they can be observed in B hadron decays.

In this project we search for the decay of B+ mesons in into an ordinary electron or muon and the yet undisovered heavy neutrino. The heavy neutrino is expected to be unstable and in turn decay quickly into a charged pion and another electron or muon. The final state in which the two leptons differ in flavour, "B+ to e mu pi", is particularly interesting: It is forbidden in the standard model, such that backgrounds are small. The analysis will be performed within the LHCb group at Nikhef using LHCb run-2 data.


Contact: Lera Lukashenko and Wouter Hulsbergen

LHCb: Searching for dark matter in exotic six-quark particles

3/4 of the mass in the Universe is of unknown type. Many hypotheses about this dark matter have been proposed, but none confirmed. Recently it has been proposed that it could be made of particles made of the six quarks uuddss. Such a particle could be produced in decays of heavy baryons. It is proposed to use Xi_b baryons produced at LHCb to search for such a state. The latter would appear as missing 4-momentum in a kinematically constrained decay. The project consists in optimising a selection and applying it to LHCb data. See arXiv:1708.08951

Contact: Patrick Koppenburg

LHCb: Measuring new decays with excited Ds states in semileptonic Bs decays to measure LFU

One of the most striking discrepancies between the Standard Model and measurements are the lepton flavour universality (LFU) measurements with tau decays. At the moment, we have observed an excess of 3-4 sigma in B → Dτν decays. This could point even to a new force of nature! To understand this discrepancy, we need to make further measurements.

There are two very exciting (pun intended) projects to verify these discrepancies. These involve measuring the Bs → Ds2*τν and/or Bs → Ds1*τν decays. These decays with excited states of the Ds meson have not been observed before, and have a unique way of coupling to potential new physics candidates that can only be measured in Bs decays [1].

Another measurement with excited Ds mesons is the decay of Bs → Ds(2317)μν, which has also never been observed before. The Ds(2317) meson is much lighter than it should be according to the theoretical predictions, raising the question if it is actually a molecular state or perhaps a tetraquark. By measuring this semileptonic decay, we can shed some light on its structure [1,2].

[1] https://arxiv.org/abs/1606.09300

[2] https://arxiv.org/abs/1501.03422

Contact: Suzanne Klaver

With the Dark Matter group: Fine structure constant

The fine-structure constant has been measured by many experiments in the past and it is one of the most precisely known constants in nature. The goal of this project is to design and build an experiment to do an in-house measurement of the fine structure constant by investigating positron annihilation to two and to three photons. The work within this project encompasses the full breadth of experimental physics: from a conceptual design to the final analysis of the data. In addition, there is a budget of 10kEuro available to purchase the necessary hardware for the project. Supervision will be done by Colijn and the Nikhef director Bentvelsen.

Contact: Auke-Pieter Colijn

Dark Matter: Sensitive tests of wavelength-shifting properties of materials for dark matter detectors

Rare event search experiments that look for neutrino and dark matter interactions are performed with highly sensitive detector systems, often relying on scintillators, especially liquid noble gases, to detect particle interactions. Detectors consist of structural materials that are assumed to be optically passive, and light detection systems that use reflectors, light detectors, and sometimes, wavelength-shifting materials. MSc theses are available related to measuring the efficiency of light detection systems that might be used in future detectors. Furthermore, measurements to ensure that presumably passive materials do not fluoresce, at the low level relevant to the detectors, can be done. Part of the thesis work can include Monte Carlo simulations and data analysis for current and upcoming dark matter detectors, to study the effect of different levels of desired and nuisance wavelength shifting. In this project, students will acquire skills in photon detection, wavelength shifting technologies, vacuum systems, UV and extreme-UV optics, detector design, and optionally in C++ programming, data analysis, and Monte Carlo techniques.

Contact: Tina Pollmann and Patrick Decowski

Dark Matter: Building better Dark Matter Detectors - the XAMS R&D Setup

The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 4kg of ultra-pure liquid xenon. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matter experiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data him/herself. You will "own" this experiment.

Contact: Patrick Decowski and Auke Colijn

Dark Matter: Searching for Dark Matter Particles - XENONnT Data Analysis

The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently starting the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the new data coming from the XENONnT detector. The work will consist of understanding the detector signals and applying a deep neural network to improve the (gas-) background discrimination in our Python-based analysis tool to improve the sensitivity for low-mass dark matter particles. The work will continue a study started by a recent graduate. There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.

Contact: Patrick Decowski and Auke Colijn

Dark Matter: The Ultimate Dark Matter Experiment - DARWIN Sensitivity Studies

DARWIN is the “ultimate” direct detection dark matter experiment, with the goal to reach the so-called “neutrino floor”, when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2027, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN, as part of a simulation team together with the University of Freiburg and Zurich. We are also working on a “fast simulation” that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills. Contact: Patrick Decowski and Auke Colijn

Detector R&D: Test beam with a bent ALPIDE monolithic active pixel sensor

The next ALICE inner tracking system that is to be installed in 2025 at the large hadron collider (LHC) will feature ultrathin silicon monolithic active pixel sensors (MAPS). The current ALICE tracking system that has just been installed already features this new, very thin pixel detectors with low noise and low power consumption, but for the next tracker they will be bent around the beam pipe. In this project, you will be part of the international ALICE collaboration. You will analyze data from beam tests performed at CERN and DESY to characterize bent pixel detectors. You will be part of the Nikhef R&D group and will also have the opportunity to perform your own measurements in the lab on the ALICE pixel detector (ALPIDE) or on an even thinner version thereof. If the travel situation allows, you will have the opportunity to join the ALICE test beam group in Hamburg at DESY to take part in the exciting experience of taking real data. Contact: Jory Sonneveld

Detector R&D: Modeling radiation damage for the next generation ATLAS pixel detector

In 2026 the ATLAS tracker will be upgraded to the largest silicon tracker in the world. This tracker will have to cope with very large data rates foreseen in the upgraded high luminosity large hadron collider (HL-LHC). From then on, this tracker will see very high rates of radiation, particularly in the inner tracker closest to the LHC beam line. In this project you will evaluate the performance of the silicon pixel sensors for the new ATLAS inner tracker. You will learn to use commercial technology computer aided design software (TCAD) for modeling semiconductors widely used in the semiconductor industry and compare your simulation results with data from the beam tests performed on the new modules for ATLAS ITk at CERN. You will also use and develop fast simulation tools like Allpix Squared for which you will use your C++ programming skills. As a member of the international ATLAS collaboration you will present your work in an international environment, and you will be part of the Nikhef detector R&D group where you will learn about the newest fast timing silicon detector technologies for LHC experiments and beyond. Contact: Jory Sonneveld

Detector R&D: Characterisation of Trench Isolated Low Gain Avalanche Detectors (TI-LGAD)

The future vertex detector of the LHCb Experiment needs to measure the spatial coordinates and time of the particles originating in the LHC proton-proton collisions with resolutions better than 10 um and 50 ps, respectively. Several technologies are being considered to achieve these resolutions. Among those is a novel sensor technology called Trench Isolated Low Gain Avalanche Detector. Prototype pixelated sensors have been manufactured recently and have to be characterised. Therefore these new sensors will be bump bonded to a Timepix4 ASIC which provides charge and time measurements in each of 230 thousand pixels. Characterisation will be done using a lab setup at Nikhef, and includes tests with a micro-focused laser beam, radioactive sources, and possibly with particle tracks obtained in a test-beam. This project involves data taking with these new devices and analysing the data to determine the performance parameters such as the spatial and temporal resolution. as function of temperature and other operational conditions.

Contacts: Kazu Akiba and Martin van Beuzekom

Detector R&D: Studying fast timing detectors

Fast timing detectors are the solution for future tracking detectors. In future LHC operation conditions and future colliders, more and more particles are produced per collision. The high particle densities make it increasingly more difficult to separate particle trajectories with the spatial information that current silicon tracking detectors provide. A solution would be to add very precise (in order of 10ps) timestamps to the spatial measurements of the particle trackers. A good understanding of the performance of fast timing detectors is necessary. With the user of a pulsed laser in the lab we study the characteristics of several prototype detectors.

Contact: Hella Snoek or Kazu Akiba

Detector R&D: Laser Interferometer Space Antenna (LISA) - Wavefront sensors for gravitational wave detection

The space-based gravitational wave antenna LISA is one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecraft separated by a few million kilometres. This constellation measures tiny variations in the distances between test-masses located in each satellite to detect gravitational waves from sources such as supermassive black holes. LISA is based on laser interferometry, and the three satellites form a giant Michelson interferometer. LISA measures a relative phase shift between one local laser and one distant laser by light interference. The phase shift measurement requires sensitive wavefront sensors. The Nikhef DR&D group fabricated prototype sensors in 2020 together with the Photonics industry and the Dutch institute for space research SRON. As an MSc student, you will work on various aspects of the wavefront sensor development: study the performance of the epitaxial stacks of Indium-Gallium-Arsenide, setting up test benches to characterize the sensors, and performing the actual tests and data analysis.

Contact: Niels van Bakel

Detector R&D: Time tracking Cosmic rays

One of the main challenges in particle physics detector technologies is to perform precise time measurements while maintaining, or even improving, the excellent spatial resolution. New sensor prototypes need to be characterised using charged particles in order to determine the actual temporal resolution. Such a characterisation can be done for instance with high energy cosmic rays. In this project you will work on building, commissioning and characterising a compact timing cosmic ray setup, aiming to achieve a resolution better than 100 picoseconds. The work will take place in the R&D labs at Nikhef using a combination of existing detectors and readout electronics as well as new silicon detectors with internal gain (LGADs), and/or fast Micro Channel Plates (MCPs).

Contacts: Kazu Akiba and Martin van Beuzekom

Neutrinos: Searching for Majorana Neutrinos with KamLAND-Zen

The KamLAND-Zen experiment, located in the Kamioka mine in Japan, is a large liquid scintillator experiment with 750kg of ultra-pure Xe-136 to search for neutrinoless double-beta decay (0n2b). The observation of the 0n2b process would be evidence for lepton number violation and the Majorana nature of neutrinos, i.e. that neutrinos are their own anti-particles. Current limits on this extraordinary rare hypothetical decay process are presented as a half-life, with a lower limit of 10^26 years. KamLAND-Zen, the world’s most sensitive 0n2b experiment, is currently taking data and there is an opportunity to work on the data analysis, analyzing data with the possibility of taking part in a ground-breaking discovery. The main focus will be on developing new techniques to filter the spallation backgrounds, i.e. the production of radioactive isotopes by passing muons. There will be close collaboration with groups in the US (MIT, Berkeley, UW) and Japan (Tohoku Univ). Contact: Patrick Decowski

Neutrinos: acoustic detection of ultra-high energy neutrinos

The study of the cosmic neutrinos of energies above 1017 eV, the so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent astrophysical sources, such as gamma ray bursts, supernovae or even dark matter. In addition, the observation of high energy neutrinos may provide a unique tool to study interactions at high energies. The energy deposition of these extreme neutrinos in water induce a thermo-acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope.

The work will be executed at the Nikhef institute and/or the TNO laboratories in Delft. In this project master students have the opportunity to contribute in the following ways:

Project 1: Hardware development on fiber optics hydrophones technology Goal: characterize existing prototype optical fibre hydrophones in an anechoic basin at TNO laboratory. Data collection, calibration, characterization, analysis of consequences for design future acoustic hydrophone neutrino telescopes; Keywords: Optical fiber technology, signal processing, electronics, lab.

Project 2: Investigation of ultra-high energy neutrinos and their interactions with matter. Goal: Discriminate the neutrino signals from the background noises, in particular clicks from whales and dolphins in the deep sea. Study impact on physics reach for future acoustic hydrophone neutrino telescopes; Keywords: Monte Carlo simulations, particle physics, neutrino physics, data analysis algorithms.

Further information: Info on ultra-high energy neutrinos can be found at: http://arxiv.org/abs/1102.3591; Info on acoustic detection of neutrinos can be found at: http://arxiv.org/abs/1311.7588

Contact: Ernst Jan Buis or Ivo van Vulpen

Neutrinos: Oscillation analysis with the first data of KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In this project the available data will be used together with simulations to best reconstruct the event topologies and optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector. The data will then be used to measure neutrino oscillation parameters, and prepare for a future neutrino mass ordering determination.

Programming skills are essential, mostly root and C++ will be used. Contact: Ronald Bruijn Paul de Jong

Neutrinos: Searching for New Heavy Neutrinos or Other Exotic Particles in KM3NeT

In this project we will be searching for a new heavy neutrino, looking at signatures created by atmospheric neutrinos interacting in the detector volume of KM3NeT-ORCA. The aim of this project is to study a specific event topology which appears as double blobs of signals detected separately by densely instrumented ORCA detector units. We will be exploiting the tau reconstruction algorithms to verify the possibility of ORCA to detect such signals and to estimate the potential sensitivity of the experiment as well. The data also opens up the possibility to search for other exotic new particles, such as magnetic monopoles. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (and possibly C++) and ROOT are advantageous but not mandatory.

Contact: Suzan B. du Pree Daan van Eijk Paul de Jong

Neutrinos: Dark Matter with KM3NeT-ORCA

Dark Matter is thought to be everywhere (we should be swimming through it), but we have no idea what it is. Using the good energy and angular resolutions of the KM3NeT neutrino telescope, we can search for Dark Matter signatures that originate from the center of our galaxy. In this project, we will search for such signatures using the reconstructed track and shower events with the KM3NeT-ORCA detector to discover relatively light Dark Matter particles. Since this year, the KM3NeT-ORCA experiment has 6 detection lines under the Mediterranean Sea: fully operational and continuously taking data. Using the available data, it is possible to compare data and simulation for different event topologies and to estimate the experiment's sensitivity. The project is suitable for a student who is interested to explore new physics scenarios and willing to develop new skills. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (possibly C++) and ROOT data analysis tool are advantageous but not mandatory.

Contact: Suzan B. du Pree Daan van Eijk

Neutrinos: the Deep Underground Neutrino Experiment (DUNE)

The Deep Underground Neutrino Experiment (DUNE) is under construction in the USA, and will consist of a powerful neutrino beam originating at Fermilab, a near detector at Fermilab, and a far detector in the SURF facility in Lead, South Dakota, 1300 km away. During travelling, neutrinos oscillate and a fraction of the neutrino beam changes flavour; DUNE will determine the neutrino oscillation parameters to unrivaled precision, and try and make a first detection of CP-violation in neutrinos. In this project, various elements of DUNE can be studied, including the neutrino oscillation fit, neutrino physics with the near detector, event reconstruction and classification (including machine learning), or elements of data selection and triggering.

Contact: Paul de Jong


Gravitational Waves: Computer modelling to design the laser interferometers for the Einstein telescope

A new field of instrument science led to the successful detection of gravitational waves by the LIGO detectors in 2015. We are now preparing the next generation of gravitational wave observatories, such as the Einstein Telescope, with the aim to increase the detector sensitivity by a factor of ten, which would allow, for example, to detect stellar-mass black holes from early in the universe when the first stars began to form. This ambitious goal requires us to find ways to significantly improve the best laser interferometers in the world.

Gravitational wave detectors, such as LIGO and VIRGO, are complex Michelson-type interferometers enhanced with optical cavities. We develop and use numerical models to study these laser interferometers, to invent new optical techniques and to quantify their performance. For example, we synthesize virtual mirror surfaces to study the effects of higher-order optical modes in the interferometers, and we use opto-mechanical models to test schemes for suppressing quantum fluctuations of the light field. We can offer several projects based on numerical modelling of laser interferometers. All projects will be directly linked to the ongoing design of the Einstein Telescope.

Contact: Andreas Freise

Gravitational Waves: Digging away the noise to find the signal

Gravitational Wave interferometers are extremely sensitive, but suffer from instrumental issues that produce noise that mimics astrophysical signals. This needs to be solved as much as possible before the data analysis. The problem is that instrumentalists don't know about analysis pipelines, and data analysts don't know about experimental details. We need your help to bridge the gap. This is a good opportunity to learn about both sides and contribute directly to a booming international field. We have several tools and new ideas for correlating noises with the state of the instrument. These need to be developed further, used on years of data, and written up. Will require Python, signal processing and statistics.

Contact: Bas Swinkels and Sarah Caudill

Theory: The electroweak phase transition and baryogenesis/gravitational wave production

In extensions of the Standard Model the electroweak phase transition can be first order and proceed via the nucleation of bubbles. Colliding bubbles can produce gravitational waves [1] and plasma particles interacting with the bubbles can generate a matter-antimatter asymmetry [2]. A detailed understanding of the dynamics of the phase transitions is needed to accurately describe these processes. One project is to study QFT at finite temperature and compare/apply methods that address the non-perturbative IR dynamics of the thermal processes [3,4]. Another project is to calculate the velocity by which the bubbles expand, which is an important parameter for gravitational waves production and baryogensis. A final option is to study the phase transition in conformal Higgs models, which naturally have a strong 1st order phase transition [5].

[1]https://arxiv.org/abs/1705.01783 [2]https://arxiv.org/pdf/hep-ph/0609145.pdf [3]https://arxiv.org/pdf/1609.06230.pdf [4]https://arxiv.org/pdf/1612.00466.pdf [5]https://arxiv.org/abs/1910.13460.pdf

Contact: Marieke Postma

Theory: Higgs inflation

The Higgs boson can drive cosmic inflation provided it has new couplings to gravity [1]. Although classically the model is in excellent agreement with the data, in the full quantum theory there are theoretical consistency issues. One possible project would be to embed Higgs inflation in [2] -- motivated to solve the Strong CP problem and explain the matter-antimatter asymmetry -- as the extended Higgs sector can alleviate the theoretical constraints. Another direction is to consider multiple new couplings to gravity [3], to see whether the ensuing inflationary dynamics allows for the production of primordial black holes.

[1]https://arxiv.org/pdf/1307.0708.pdf [2]https://arxiv.org/pdf/2007.12711.pdf [3]https://arxiv.org/abs/2011.09485.pdf

Contact: Marieke Postma

Theory: Neutrinos, hierarchy problem and cosmology

The electroweak hierachy is radiatively stable if the quadratic term in the Higgs potential is generated dynamically. This is achieved in 'the neutrino option' [1] where the Higgs potential stems exclusively from quantum effects of heavy right-handed neutrinos, which can also generate the mass pattern of the oberved left-handed neutrinos. The project focusses on model building aspects (e.g. [2]) and the cosmology (e.g. leptogenesis [3]) of these set-ups.

[1] https://arxiv.org/pdf/1703.10924.pdf [2] https://arxiv.org/pdf/1807.11490.pdf [3] https://arxiv.org/pdf/1905.12642.pdf

Contact: Marieke Postma


2020

ATLAS: Top Spin optimal observables using Artificial Intelligence

The top quark has an exceptional high mass, close to the electroweak symmetry breaking scale and therefore sensitive to new physics effects. Theoretically, new physics is well described in the EFT framework [1]. The (EFT) operators are experimentally well accessible in single top t-channel production where the top quark is produced spin polarized. The focus at Nikhef is the operator O_{tW} with a possible imaginary phase, leading to CP violation. Experimentally, many angular distribution are reconstructed in the top rest frame to hunt for these effects. We are looking for a limited set of optimal observables. The objective of your Master project would be to find optimal observables using simulated events including the detector effects and possible systematic deviations. All techniques are allowed, but promising new developments are methods which involve artifical intelligence. This work could lead to an ATLAS note.

[1] https://arxiv.org/abs/1807.03576

Contact: Marcel Vreeswijk [4] and Jordy Degens [5]

ATLAS: The Next Generation

After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays), advanced analysis techiques (using deep learning methods) and expanding the theory interpretation. Another opportunity would be the development of the first statistical combination of results between the ATLAS and CMS experiment, which could significantly improve the discovery potentional.

[1] https://arxiv.org/abs/1802.04329

Contact: Tristan du Pree and Marko Stamenkovic

ATLAS: The Most Energetic Higgs Boson

The production of Higgs bosons at the highest energies could give the first indications for deviations from the standard model of particle physics, but production energies above 500 GeV have not been observed yet [1]. The LHC Run-2 dataset, collected during the last 4 years, might be the first opportunity to observe such processes, and we have various ideas for new studies. Possible developments include the improvement of boosted reconstruction techniques, for example using multivariate deep learning methods. Also, there are various opportunities for unexplored theory interpretations (using the MadGraph event generator), including effective field theory models (with novel ‘morphing’ techniques) and new interpretations of the newly observed boosted VZ(bb) process.

[1] https://arxiv.org/abs/1709.05543

Contact: Tristan du Pree and Brian Moser

LHCb: Measurement of delta md

The decay B0->D-pi+ is very abundant in LHCb, and therefore ideal to study the oscillation frequency delta md, with which B0 mesons oscillate into anti-B0 mesons, and vice versa. This process proceeds through a so-called box diagram which might hide new yet-undiscovered particles. Recently, it has been realized that value of delta md is in tension with the valu of CKM-angle gamma, triggering renewed interest in this measurement.

Contact: Marcel Merk

LHCb: Searching for CPT violation

CPT symmetry is closely linked to Lorentz symmetry, and any violation would revolutionize science. There are possibilities though that supergravity could cause CPT violating effects in the system of neutral mesons. The precise study of B0s oscillations in the abundant Bs->Dspi decays can give the most stringent limits on Im(z) to date.

Contact: Marcel Merk

LHCb: BR(B0->D-pi+) and fd/fu with B+->D0pi+

The abundant decay B0->D-pi+ is often used as normalization channel, given its clean signal, and well-known branching fraction, as measured by the B-factories. However, this branching fraction can be determined more precisely, when comparing to the decay B+->D0pi+ , which has a twice better precision. In addition, the production of B0 and B+ mesons is often assumed to be equal, based on isospin symmetry. The study of B+->D0pi+ and B0->D-pi+ allows for the first measurement of this ratio, fd/fu.

Contact: Marcel Merk


LHCb: Optimization studies for Vertex detector at the High Lumi LHCb

The LHCb experiment is dedicated to measure tiny differences between matter and antimatter through the precise study of rare processes involving b or c quarks. The LHCb detector will undergo a major modification in order to dramatically increase the luminosity and be able to measure indirect effects of physics beyond the standard model. In this environment, over 42 simultaneous collisions are expected to happen at a time interval of 200 ps where the two proton bunches overlap. The particles of interest have a relatively long lifetime and therefore the best way to distinguish them from the background collisions is through the precise reconstruction of displaced vertices and pointing directions. The new detector considers using extremely recent or even future technologies to measure space (with resolutions below 10 um) and time (100 ps or better) to efficiently reconstruct the events of interest for physics. The project involves changing completely the LHCb Vertex Locator (VELO) design in simulation and determine what can be the best performance for the upgraded detector, considering different spatial and temporal resolutions.

Contact: Kazu Akiba

LHCb: Measurement of charge multiplication in heavily irradiated sensors

During the R&D phase for the LHCb VELO Upgrade detector a few sensor prototypes were irradiated to the extreme fluence expected to be achieved during the detector lifetime. These samples were tested using high energy particles at the SPS facility at CERN with their trajectories reconstructed by the Timepix3 telescope. A preliminary analysis revealed that at the highest irradiation levels the amount of signal observed is higher than expected, and even larger than the signal obtained at lower doses. At the Device Under Test (DUT) position inside the telescope, the spatial resolution attained by this system is below 2 um. This means that a detailed analysis can be performed in order to study where and how this signal amplification happens within the 55x55 um^2 pixel cell. This project involves analysing the telescope and DUT data to investigate the charge multiplication mechanism at the microscopic level.

Contact: Kazu Akiba

LHCb: Testing the flavour anomalies at LHCb

Lepton Flavour Universality (LFU) is an intrinsic property of the Standard Model, which implies that the three generation of leptons are subject to the same interactions. This fundamental law of the SM can be investigated by looking at rare B-meson decay with muons or electron in the final state. Recent measurements of these decays from LHCb show deviation from the SM (known as flavour anomalies) that, if confirmed, would lead to a major discovery of New Physics (NP). The project consists in the analysis of the 2017-18 dataset, which will double the statistic of the current results. This new dataset will lead to a measurement with better precision, which can either confirm or exclude the contribution of NP to these decays. The project will explore all the crucial aspect of data analysis, from simulation to signal modeling, including cutting-edge software, such us fitting large amount of data using GPU (Graphic Processing Unit).

Contact: Andrea Mauri and Marcel Merk

LHCb: Search for long-lived heavy neutral leptons in B decays

The mass of neutrinos are many orders of magnitude smaller than that of the other fermions. In the seesaw mechanism this puzzling fact is explained by the existence of another set of neutral leptons that are much heavier in mass. If their mass is below about 5 GeV such neutrinos can be produced at the LHC in decays of B hadrons. Their small coupling will lead to a lifetime of the order of pico-seconds which means that they will fly an observable distance before they decay. In this project we search for such long-lived heavy neutrinos in decays of charged B mesons using the LHCb run-2 dataset.

Contact: Lera Lukashenko and Wouter Hulsbergen

LHCb: Discovering the Bc->eta_c mu nu decay

The Bc meson, consisting of heavy c and anti-b quarks, is of great interest for flavour physics. Recent LHCb measurement on Bc->J/psi l nu decays [1] showed a possible deviation from the Standard Model prediction, which entered the so-called lepton universality puzzle - the hottest topic in the b-physics in recent years. Following that, the study of a similar decay mode - Bc->eta_c mu nu - is strongly requested by the theory community. However, the reconstruction of the eta_c meson is challenging, so that the decay has not been discovered yet. The project aims at discovery of the Bc->eta_c mu nu decay using unique capabilities of the LHCb experiment. The data analysis will consist of finding the optimal event selection using machine learning techniques, research on background sources, performing fits to data, etc. The project requires to be not afraid of analysis software and statistics. The results will be presented in collaboration: talks at working group meetings, analysis note, etc. Skills in git, python and ROOT (and similar packages) are extremely welcome.

[1] https://arxiv.org/pdf/1711.05623.pdf

Contact: Andrii Usachov and Marcel Merk

ALICE: Searching for the strongest magnetic field in nature

In case of a non-central collision between two Pb ions, with a large value of impact parameter (b), the charged nucleons that do not participate in the interaction (called spectators) create strong magnetic fields. A back of the envelope calculation using the Biot-Savart law brings the magnitude of this filed close to 10^19Gauss in agreement with state of the art theoretical calculation, making it the strongest magnetic field in nature. The presence of this field could have direct implications in the motion of final state particles. The magnetic field, however, decays rapidly. The decay rate depends on the electric conductivity of the medium which is experimentally poorly constrained. Overall, the presence of the magnetic field, the main goal of this project, is so far not confirmed experimentally.

Contact: Panos Christakoglou

ALICE: Looking for parity violating effects in strong interactions

Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions, in the presence of a deconfined state, gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, what is called the Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, however further studies are needed to constrain background effects. These highly anticipated results have the potential to reveal exiting, new physics.

Contact: Panos Christakoglou

ALICE: Machine learning techniques as a tool to study the production of heavy flavour particles

There was recently a shift in the field of heavy-ion physics triggered by experimental results obtained in collisions between small systems (e.g. protons on protons). These results resemble the ones obtained in collisions between heavy ions. This consequently raises the question of whether we create the smallest QGP droplet in collisions between small systems. The main objective of this project will be to study the production of charm particles such as D-mesons and Λc-baryons in pp collisions at the LHC. This will be done with the help of a new and innovative technique which is based on machine learning (ML). The student will also extend the studies to investigate how this production rate depends on the event activity e.g. on how many particles are created after every collision.

Contact: Panos Christakoglou and Alessandro Grelli

ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma

One of the ways to study the quark-gluon plasma that is formed in high-energy nuclear collisions, is using high-energy partons (quarks or gluons) that are produced early in the collision and interact with the quark-gluon plasma as they propagate through it. There are several current open questions related to this topic, which can be explored in a Master's project. For example, we would like to use the new Monte Carlo generator framework JetScape to simulate collisions to see whether we can extract information about the interaction with the quark-gluon plasma. In the project you will collaborate with one of the PhD students or postdocs in our group to use the model to generate predictions of measurements and compare those to data analysis results. Depending on your interests, the project can focus more on the modeling aspects or on the analysis of experimental data from the ALICE detector at the LHC.

Contact: Marco van Leeuwen and Marta Verweij

ALICE: Extreme Rare Probes of the Quark-Gluon Plasma

The quark-gluon plasma is formed in high-energy nuclear collisions and also existed shortly after the big bang. With the large amount of data collected in recent years at the Large Hadron Collider at CERN, rare processes that previously were not accessible provide now new ways to study how the quark-gluon plasma emerges from the fundamental theory of strong interaction. One of such processes is the heavy W boson which in many cases decays to two quarks. The W boson itself doesn’t interact with the quark-gluon plasma because it doesn’t carry color, but the quark decay products do interact with the plasma and therefore provide an ideal tool to study the space-time evolution of this hot and dense medium. In this project you will use data from the ALICE detector at the LHC and simulated data from generators to study various physics mechanisms that could be happening in the real collisions.

Contact: Marta Verweij and Marco van Leeuwen

ALICE: Jet Quenching with Machine Learning

Machine learning applications are rising steadily as a vital tool in the field of data science but are relatively new in the particle physics community. In this project machine learning tools will be used to gain insights into the modification of a parton shower in the quark-gluon plasma (QGP). The QGP is created in high-energy nuclear collisions and only lives for a very short period of time. Highly energetic partons created in the same collisions interact with the plasma while they travers it and are observed as a collimated spray of particles, known as jets, in the detector. One of the key recent insights is that the internal structure of jets provides information about the evolution of the QGP. With data recorded by the ALICE experiment, you will use jet substructure techniques in combination with machine learning algorithms to dissect the structure of the QGP. Machine learning will be used to select the regions of radiation phase space that are affected by the presence of the QGP.

Contact: Marta Verweij and Marco van Leeuwen

Lepton Collider: Pixel TPC testbeam

In the Lepton Collider group at Nikhef we work on a tracking detector for a future Collider (e.g. the ILC in Japan). We are developing a gaseous Time Projection Chamber with a pixel readout. At Nikhef we have built an 8-quad GridPix module based on the Timepix3 chip, which is a detector of about 20 cm x 40 cm x 10 cm in size. In August 2020 we will test the device at the DESY particle accelerator in Hamburg. For the project you could work on preparations for the test beam (e.g. running the data acquisition, perform data monitoring using our set up in the lab). The next topics will be the participation in the data taking during the test beam at DESY, the analysis of the data using C++ and ROOT and - finally - publication of the results in a scientific journal.

Our latest paper can be found in https://www.nikhef.nl/~s01/quad_paper.pdf [www.nikhef.nl].

Contact: Peter Kluit and Kees Ligtenberg

Dark Matter: Sensitive tests of wavelength-shifting properties of materials for dark matter detectors

Rare event search experiments that look for neutrino and dark matter interactions are performed with highly sensitive detector systems, often relying on scintillators, especially liquid noble gases, to detect particle interactions. Detectors consist of structural materials that are assumed to be optically passive, and light detection systems that use reflectors, light detectors, and sometimes, wavelength-shifting materials. MSc theses are available related to measuring the efficiency of light detection systems that might be used in future detectors. Furthermore, measurements to ensure that presumably passive materials do not fluoresce, at the low level relevant to the detectors, can be done. Part of the thesis work can include Monte Carlo simulations and data analysis for current and upcoming dark matter detectors, to study the effect of different levels of desired and nuisance wavelength shifting. In this project, students will acquire skills in photon detection, wavelength shifting technologies, vacuum systems, UV and extreme-UV optics, detector design, and optionally in C++ programming, data analysis, and Monte Carlo techniques.

Contact: Tina Pollmann and Patrick Decowski

Dark Matter: Signal reconstruction in XENONnT

The next generation direct detection dark matter experiment - XENONnT - comprises close to 500 photomultiplier tubes (PMTs) in the main detector volume. These PMTs are configured to be able to detect even single photons. When a single photoelectron (PE) signal is detected the detected signal (a pulse) is convoluted with the detector response of the PMT. Due to this detector response the pulse shape of a single PE is spread out in time. For XENONnT we would like to explore the possibility to implement a digital (software) filter to deconvolve the detected pulse back to the “true” instantaneous shape (without the detector spread). This is a virtually unexplored new step in the Xenon analysis framework. Later in the analysis framework these pulses from all the PMTs are combined into a signal referred to as a ‘peak’. For XENONnT it is of essence to be extremely good in discriminating between two types of peaks caused by interactions in the detector; a prompt primary scintillation signal (S1) and a secondary ionization signal (S2). The parameters in the software haven’t - as of the time of writing - been optimized for the XENONnT-detector conditions. The student would investigate how a deconvolution filter would benefit the XENONnT analysis framework and develop such a filter. Furthermore, the student will work on the classification of these signals to fully exploit the XENONnT-detector to optimize the classification. This will be done with simulated data at first but may later even be performed on actual XENONnT-data. As an extension, the possibility of applying machine learning to correctly distinguish between the two signals could be explored. This is a data-analysis oriented project where Python skills are paramount.

Contact: Patrick Decowski and Joran Angevaare

Dark Matter: XAMS R&D Setup

The Amsterdam Dark Matter group operates an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 4kg of ultra-pure liquid xenon. We use this detector for the development of new detection techniques - such as utilizing our newly installed silicon photomultipliers - and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENONnT experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory, or for future Dark Matter experiments like DARWIN. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data him/herself. You will "own" this experiment.

Contact: Patrick Decowski and Auke Colijn

Dark Matter: DARWIN Sensitivity Studies

DARWIN is the "ultimate" direct detection dark matter experiment, with the goal to reach the so-called "neutrino floor", when neutrinos become a hard-to-reduce background. The large and exquisitely clean xenon mass will allow DARWIN to also be sensitive to other physics signals such as solar neutrinos, double-beta decay from Xe-136, axions and axion-like particles etc. While the experiment will only start in 2025, we are in the midst of optimizing the experiment, which is driven by simulations. We have an opening for a student to work on the GEANT4 Monte Carlo simulations for DARWIN, as part of a simulation team together with the University of Freiburg and Zurich. We are also working on a "fast simulation" that could be included in this framework. It is your opportunity to steer the optimization of a large and unique experiment. This project requires good programming skills (Python and C++) and data analysis/physics interpretation skills.

Contact: Patrick Decowski and Auke Colijn

Dark Matter: Fast simulation studies

For Dark Matter experiments it is crucial to understand sources of backgrounds in great detail. The most common way to study the effect of backgrounds to the Dark Matter sensitivity is by the use of Monte Carlo simulations. Unfortunately, the standard Monte Carlo techniques are extremely inefficient. One needs to sometimes simulate millions of events before one background event appears in the Dark Matter search area. We have developed a Monte Carlo technique that accelerates this process by up to 1000x. The method has been validated on very simple and unrealistic detector models. In goal of this project is to make a realistic detector model for the fast detector simulations. For this we are looking for a student with good programming skills, an interest in a software project, and the desire to deeply understand analysis of Dark Matter experimental data.

Contact: Patrick Decowski and Auke Colijn

Dark Matter & Amsterdam Scientific Instruments: Simulations for Industry

In the Nikhef Dark Matter group we have built up an extensive expertise with Monte Carlo simulations of ionizing radiation. Although these simulations have the aim to estimate background levels in our XENON experiments, the same techniques can be applied to study radiation transport in industrial devices. Amsterdam Scientific Instruments (ASI) is a company at Science Park that develops and sells radiation imaging equipment that is used amongst others in electron microscopy. For this application ASI needs a detailed study of gamma ray backgrounds to optimize shielding for their products. The project aims at optimizing a shielding design based on GEANT4 simulations. The results may be implemented in next generation products of ASI. We are looking for a student with preferably strong computing skills, and with an interest in science-industrial collaboration.

Contact: Patrick Decowski and Auke Colijn

The Modulation experiment: Data Analysis

For years there have been controversial claims of potential new-physics on the basis of time-varying decay rates of radioactive sources on top of ordinary exponential decay. While some of these claims have been refuted, others have still to be confirmed or falsified. To this end, a dedicated experiment - the modulation experiment - has been designed and operational for the past four years. Using four identical and independent setups the experiment is almost ready for a final analysis to conclude on these claims. In this project the student will perform this analysis, preferably resulting in a conclusive paper. This will require combining the data of the four setups and close collaboration with a small group constituting a collaboration of the four different involved institutes (Purdue University (USA), Universität Zürich (Switzerland), Centro Brasileiro de Pesquisas Fisicas (Brasil) and Nikhef). This project is data-analysis oriented. Additionally, lab-skills can be required as one of the setups is situated at Nikhef.


Contact: Auke Colijn and Joran Angevaare

Detector R&D: Performance of the ALPIDE monolithic active pixel sensor with radiation damage

The ALICE inner tracking system (ITS) 2 is currently being installed at the large hadron collider (LHC) at CERN. This detector makes use of ultra-lightweight monolithic active pixel sensors, the first to use this technology at a particle collider after the STAR experiment at RHIC in Brookhaven. These very thin pixel detectors have a low power consumption, result in very little material in the detector, and still have optimal timing and resolution -- and are a promising technology for future experiments. You will be part of the international ALICE collaboration and investigate the ALICE ALPIDE chip. Although ALICE will not see high levels of radiation at the LHC, it has so far not been tested whether this chip can withstand very high levels of radiation and could be, if there is no large degradation in performance, be used in experiments like ATLAS as well. You will be part of the Nikhef R&D group where you will learn about new detector technologies for high energy physics and learn to design a test setup to characterize the ALPIDE chip in a particle beam using the many instruments at the Nikhef R&D labs. You will then test the chip at the Delft or Groningen facilities that provide a particle beam.

Contact: Jory Sonneveld

Detector R&D: Studying fast timing detectors

Fast timing detectors are the solution for future tracking detectors. In future LHC operation conditions and future colliders, more and more particles are produced per collision. The high particle densities make it increasingly more difficult to separate particle trajectories with the spatial information that current silicon tracking detectors provide. A solution would be to add very precise (in order of 10ps) timestamps to the spatial measurements of the particle trackers. A good understanding of the performance of fast timing detectors is necessary. With the user of a pulsed laser in the lab we study the characteristics of several prototype detectors.

Contact: Hella Snoek or Kazu Akiba

Detector R&D: Time resolution of a high voltage monolithic active pixel sensor

For the first time, CMOS monolithic active pixel sensors (MAPS), where chip and sensor are integrated, are being used in an experiment at the LHC. Although this is a common technology in industry, it is rather new in the high rate, high radiation environments of high energy particle physics. The ALICE experiment is currently installing such MAPS to which a moderate bias voltage can be applied. You will work in the international RD50 collaboration that works on radiation hard semiconductor devices for very high luminosity colliders, and investigate their MAPS that can be biased to very high voltages to avoid signal degradation after radiation damage. You will be part of the Nikhef R&D group where you will learn about new detector technologies for high energy physics and learn to design a test setup to get a first measurement of time resolution of the RD50 HV-CMOS chip using the many instruments at the Nikhef R&D labs.

Contact: Jory Sonneveld


Detector R&D: Test beam with a bent ALPIDE monolithic active pixel sensor

The ALICE inner tracking system (ITS) 2 is currently being installed at the large hadron collider (LHC) at CERN. This detector makes use of ultra-lightweight monolithic active pixel sensors, the first to use this technology at a particle collider after the STAR experiment at RHIC in Brookhaven. These very thin pixel detectors have a low power consumption, result in very little material in the detector, and still have optimal timing and resolution -- and are a promising technology for future experiments. For the next long shutdown in 2025, an even smaller feature size version of the ALPIDE chip will be used and will be installed by bending larger surfaces of sensor around the beam pipe. Recent test beams at DESY in Hamburg show this yields good results. You will be part of the Nikhef R&D group where you will learn about new detector technologies for high energy physics and learn to design a test setup to characterize the ALPIDE chip using the many instruments at the Nikhef R&D labs. You will work within an international collaboration where you will learn to analyze test beam data. If the travel situation allows, you will have the opportunity to join the ALICE test beam group in Hamburg at DESY to take part in the exciting experience of taking real data.

Contact: Jory Sonneveld

Detector R&D: Simulating the performance of the ATLAS pixel detector after years of radiation

The innermost detector of the ATLAS experiment at the large hadron collider (LHC) that is closest to the beam pipe is the ATLAS pixel detector. The pixel sensors in this area receive the highest amounts of radiation and their performance suffers accordingly. To better understand the effects of radiation damage and to be able to predict the future performance, the pixel sensors are modeled using programs such as technology computer aided design (TCAD) for modeling electric fields that serves as input for programs such as AllPix2 for modeling observables affecting the signal quality such as charge collection efficiency. In this project, you will learn to use TCAD, a tool widely used in the semiconductor industry, to model electric field maps of the sensor, and get an estimate of the uncertainties by comparing the prediction for different models. You will compare your simulations to real data from the ATLAS experiment as well as to data from test beams. You will work in an international environment within the ATLAS collaboration and be part of the Nikhef detector R&D group where you will learn about the newest detector technologies for high energy physics and beyond. Your improved predictions for the performance of the next ATLAS pixel detector will help ATLAS better prepare for future LHC data taking after the installation of this detector in 2025.

Contact: Jory Sonneveld

Detector R&D: Laser Interferometer Space Antenna (LISA)

The space-based gravitational wave antenna LISA is, without a doubt, one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecraft that are separated by a few million kilometers to measure tiny variations in the distances between test-masses located in each satellite to detect the gravitational waves from sources such as supermassive black holes. The triangular constellation of the LISA mission is dynamic, requiring a constant fine-tuning related to the pointing of the laser links between the spacecraft and a simultaneous refocusing of the telescope. The noise sources related to the laser links expect to provide a dominant contribution to the LISA performance. An update and extension of the LISA science simulation software are needed to assess the hardware development for LISA at Nikhef, TNO, and SRON. A position is therefore available for a master student to study the impact of instrumental noise on the performance of LISA. Realistic simulations based on hardware (noise) characterization measurements performed at TNO will be carried out and compared to the expected tantalizing gravitational wave sources.

Contact: Niels van Bakel,Ernst-Jan Buis

Detector R&D: Spectral X-ray imaging - Looking at colours the eyes can't see

When a conventional X-ray image is taken, one acquires an image that only shows intensities. a ‘black and white’ image. Most of the information carried by the photon energy is lost. Lacking spectral information can result in an ambiguity between material composition and amount of material in the sample. If the X-ray intensity as a function of the energy can be measured (i.e. a ‘colour’ X-ray image) more information can be obtained from a sample. This translates to less required dose and/or to a better understanding of the sample that is being investigated. For example, two fields that can benefit from spectral X-ray imaging are mammography and real time CT.

Detectors using Medipix3 chips are used for X-ray imaging. Such a detector is composed of a pixel chip with a semiconductor sensor bonded on top of it. Photoelectric absorption of X-rays in the sensor results in an amount of charge being released that is proportional to the X-ray energy. This charge is registered by a pixel. Depending on configuration, in each pixel 1, 2, 4 or 8 detection thresholds can be set and so, a number of energy bins can be defined. One of the challenges is to maximise X-ray image quality by minimising effects caused by dispersion in the sensitivity of the pixels. The effects of this dispersion can partly be compensated by applying a specific measurement method in combination with image post processing.

You can work on improving measurement methods and on improving post processing methods. There is flexibility of the planned work depending on the skillset you have. The aim is to get the best X-ray energy resolution over the entire pixel chip. This in turn improves image quality and therefore X-ray CT reconstruction quality.

Important note: Much of this work is to be performed in the laboratory. Because of the corona pandemic it is not sure if it is possible to be physically present for enough of the time for this project. Please contact us to discuss the possibilities.

Please see the following videos for examples of our work:

https://youtu.be/cgwQvjfUYns

https://youtu.be/tf9ZLALPVNY

https://youtu.be/vjPX7SxvSUk

https://youtu.be/LqjNVSm7Hoo

Contact: Martin Fransen,Navrit Bal

Detector R&D: Holographic projector

A difficulty in projecting holograms (based on the interference of light) is the required dense pixel pitch of a projector. One would need a pixel pitch of less than 200 nanometer. With larger pixels artefacts occur due to spatial under sampling. A pixel pitch of 200 nanometer is difficult, if not, impossible, to achieve, especially for larger areas. Another challenge is the massive amount of computing power that would be required to control such a dense pixel matrix.

A new holographic projection method has been developed that reduces under sampling artefacts for projectors with a ‘low’ pixel density. It uses 'pixels' at random but known positions, resulting in an array of (coherent) light points that lacks (or has suppressed) spatial periodicity. As a result a holographic projector can be built with a significantly lower pixel density and correspondingly less required computing power. This could bring holography in reach for many applications like display, lithography, 3D printing, metrology, etc...

Of course, nothing comes for free: With less pixels, holograms become noisier and the contrast will be reduced (not all light ends up in the hologram). The questions: How does the quality of a hologram depend on pixel density? How do we determine projector requirements based on requirements for hologram quality?

Requirements for a hologram can be expressed in terms of: Noise, contrast, resolution, suppression of under sampling artefacts, etc..

For this project we have built a proof of concept holographic emitter. This set-up will be used to verify simulation results (and also to project some cool holograms of course ;-).

Examples of what you could be working on:

a. Calibration/characterisation of the current projector and compensation of systematic errors.

b. To realize a phased array of randomly placed light sources the pixel matrix of the projector must be ‘relayed’ onto a mask with apertures at random but precisely known positions. Determine the best possible relaying optics and design an optimized mask accordingly. Factors like deformation of the projected pixel matrix and limitations in resolving power of the lens system must be taken into account for mask design.

Important note: Much of this work is to be performed in the laboratory. Because of the corona pandemic it is not sure if it is possible to be physically present for enough of the time for this project. Please contact me to discuss the possibilities.

Contact: Martin Fransen

Theory: The Effective Field Theory Pathway to New Physics at the LHC

A promising framework to parametrise in a robust and model-independent way deviations from the Standard Model (SM) induced by new heavy particles is the Standard Model Effective Field Theory (SMEFT). In this formalism, beyond the SM effects are encapsulated in higher-dimensional operators constructed from SM fields respecting their symmetry properties. In this project, we aim to carry out a global analysis of the SMEFT from high-precision LHC data, including Higgs boson production, flavour observables, and low-energy measurements. This analysis will be carried out in the context of the recently developed SMEFiT approach [1] based on Machine Learning techniques to efficiently explore the complex theory parameter space. The ultimate goal is either to uncover glimpses of new particles or interactions at the LHC, or to derive the most stringent model-independent bounds to date on general theories of New Physics. Of particular interest are novel methods for charting the parameter space [2], the matching to UV-complete theories in explicit BSM scenarios [3], and the interplay between EFT-based model-independent searches for new physics and determinations of the proton structure from LHC data [4].

[1] https://arxiv.org/abs/1901.05965 [2] https://arxiv.org/abs/1906.05296 [3] https://arxiv.org/abs/1908.05588 [4] https://arxiv.org/abs/1905.05215

Contact: Juan Rojo

Theory: Charting the quark and gluon structure of protons and nuclei with Machine Learning

Deepening our knowledge of the partonic content of nucleons and nuclei [1] represents a central endeavour of modern high-energy and nuclear physics, with ramifications in related disciplines such as astroparticle physics. There are two main scientific drivers motivating these investigations of the partonic structure of hadrons. On the one hand, addressing fundamental open issues in our understanding in the strong interactions such as the origin of the nucleon mass, spin, and transverse structure; the presence of heavy quarks in the nucleon wave function; and the possible onset of novel gluon-dominated dynamical regimes. On the other hand, pinning down with the highest possible precision the substructure of nucleons and nuclei is a central component for theoretical predictions in a wide range of experiments, from proton and heavy ion collisions at the Large Hadron Collider to ultra-high energy neutrino interactions at neutrino telescopes. The goal of this project is to exploit Machine Learning and Artificial Intelligence tools [2,3] (neural networks trained by stochastic gradient descent) to pin down the quark and gluon substructure of protons and nuclei by using recent measurements from proton-proton and proton-lead collisions at the LHC. Topics of special interest are i) the strange content of protons and nuclei, ii) parton distributions at higher-orders in the QCD couplings for precision Higgs physics, iii) the interplay between jet, photon, and top quark production data to pin down the large-x gluon, and iv) charm quarks as a probe of gluon shadowing at small-x. The project also involves developing projects for the Electron-Ion Collider (EIC), a new lepton-nucleus experiment to start operations in the next years.

[1] https://arxiv.org/abs/1910.03408 [2] https://arxiv.org/abs/1904.00018 [3] https://arxiv.org/abs/1706.00428

Contact: Juan Rojo

Theory: Machine learning for Electron Microscopy for next-generation materials

Machine Learning tools developed and applied for particle physics hold great potential for applications in material science, in particular concerning faithful uncertainty estimation and model training for large parameter spaces. In this project, carried out in collaboration with the group of Dr. Sonia Conesa-Boj from the Kavli Institute Nanoscience Delft, http://www.conesabojlab.tudelft.nl, we will develop and deploy ML tools for data analysis in Electron Microscopy. We will focus on pinning down the properties of novel quantum materials such as topological insulators and van der Waals materials. Examples of possible applications include model-independent background subtraction in electron-energy loss spectroscopy, automatic classification of crystalline structures, and enhancing spatial and spectral resolution using convolutional networks.

Contact: Juan Rojo

Theory: The electroweak phase transition and baryogenesis/gravitational wave production

In extensions of the Standard Model the electroweak phase transition can be first order and proceed via the nucleation of bubbles. Colliding bubbles can produce gravitational waves [1] and plasma particles interacting with the bubbles can generate a matter-antimatter asymmetry [2]. A detailed understanding of the dynamics of the phase transitions is needed to accurately describe these processes. One project is to study QFT at finite temperature and compare/apply methods that address the non-perturbative IR dynamics of the thermal processes [3,4]. Another project is to calculate the velocity by which the bubbles expand, which is an important parameter for gravitational waves production and baryogensis. This entails among other things tunneling dymamics, (thermal) scattering rates and Boltzmann equations [5].

[1]https://arxiv.org/abs/1705.01783 [2]https://arxiv.org/pdf/hep-ph/0609145.pdf [3]https://arxiv.org/pdf/1609.06230.pdf [4]https://arxiv.org/pdf/1612.00466.pdf [5]https://arxiv.org/pdf/1809.04907.pdf

Contact: Marieke Postma

Theory: Cosmology of the QCD axion

The QCD axion provides an elegant solution to the strong CP problem in QCD[1]. This project focus on the cosmological dynamics of this hypothesized axion field, and in particular the possibility that it can both produce the observed matter-antimatter asymmetry and dark matter abundance in our universe [2,3].

[1]https://arxiv.org/abs/1812.02669 [2]https://arxiv.org/pdf/hep-ph/0609145.pdf [3]https://arxiv.org/pdf/1910.02080.pdf

Contact: Marieke Postma

Theory: Neutrinos, hierarchy problem and cosmology

The electroweak hierachy problem is absent if the quadratic term in the Higgs potential is generated dynamically. This is achieved in 'the neutrino option' [1] where the Higgs potential stems exclusively from quantum effects of heavy right-handed neutrinos, which can also generate the mass pattern of the oberved left-handed neutrinos. The project focusses on model building aspects (e.g. [2]) and the cosmology (e.g. leptogenesis [3]) of these set-ups.

[1] https://arxiv.org/pdf/1703.10924.pdf [2] https://arxiv.org/pdf/1807.11490.pdf [3] https://arxiv.org/pdf/1905.12642.pdf

Contact: Marieke Postma

KM3NeT: Reconstruction of first neutrino interactions in KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In this project the available data will be used together with simulations to best reconstruct the event topologies and optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector and with this pave the path towards accurate neutrino oscillation measurements and neutrino astronomy.

Programming skills are essential, mostly root and C++ will be used. Contact: Ronald Bruijn Dorothea Samtleben'

KM3NeT: Searching for New Heavy Neutrinos

In this project we will be searching for a new heavy neutrino, looking at signatures created by atmospheric neutrinos interacting in the detector volume of KM3NeT-ORCA. The aim of this project is to study a specific event topology which appears as double blobs of signals detected separately by densely instrumented ORCA detector units. We will be exploiting the tau reconstruction algorithms to verify the possibility of ORCA to detect such signals and to estimate the potential sensitivity of the experiment as well. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (and possibly C++) and ROOT are advantageous but not mandatory.

Contact: Suzan B. du Pree Daan van Eijk

KM3NeT: Dark Matter with KM3NeT-ORCA

Dark Matter is thought to be everywhere (we should be swimming through it), but we have no idea what it is. Using the good energy and angular resolutions of the KM3NeT neutrino telescope, we can search for Dark Matter signatures that originate from the center of our galaxy. In this project, we will search for such signatures using the reconstructed track and shower events with the KM3NeT-ORCA detector to discover relatively light Dark Matter particles. Since this year, the KM3NeT-ORCA experiment has 6 detection lines under the Mediterranean Sea: fully operational and continuously taking data. Using the available data, it is possible to compare data and simulation for different event topologies and to estimate the experiment's sensitivity. The project is suitable for a student who is interested to explore new physics scenarios and willing to develop new skills. Basic knowledge of elementary particle physics and data analysis techniques will be advantageous. The knowledge of programming languages e.g. python (possibly C++) and ROOT data analysis tool are advantageous but not mandatory.

Contact: Suzan B. du Pree Daan van Eijk


Gravitational Waves: Unraveling the structure of neutron stars with gravitational wave observations

Neutron stars were first discovered more than half a century ago, yet their detailed internal structure largely remains a mystery. A range of theoretical models have been put forward for the neutron star "equation of state", but until recently there was no real way to test them. The direct detection of gravitational waves with LIGO and Virgo has the potential to remedy the situation. When two neutron stars spiral towards each other, they get tidally deformed in a way that is determined by the equation of state, and these deformations get imprinted upon the shape of the gravitational wave that gets emitted. After the first gravitational wave observation of such an event in 2017, several equation of state models could already be ruled out. With expected upgrades of the detectors, we will at some point have access not only to the "inspiral" of binary neutron stars, but to the merger itself, and what happens afterwards. The project will consist of using results from large-scale numerical simulations to come up with a heuristic model for the waveform that describes the inspiral-merger-postmerger process with sufficient accuracy given expected detector sensitivities, and to develop data analysis techniques to efficiently use this model to extract information about the neutron star equation of state.

Contact: Chris Van Den Broeck


Gravitational Waves: Searches for gravitational waves from compact binary coalescence

Searches for gravitational waves from the mergers of black holes and neutron stars have been extraordinarily successful in the last four years. We are now beginning to study a population of heavy stellar-mass black holes in detail, including understanding how these systems came to form and whether they are consistent with general relativity. Additionally, the detection of binary neutron star mergers is allowing us to probe their extreme matter. However, we’ve only just scratched the surface of possible signals and the new physics they’d allow us to study. The detection of highly spinning and precessing systems would allow us to perform black hole population statistics to an extraordinary degree of accuracy. Detection of sub-solar mass systems would provide evidence of dark matter. However, these searches are difficult because they require us to work in high-dimensional spaces and develop new statistical methods. There are possibilities for several projects that involve the development and implementation of these new searches as well as the interpretation of the results, particularly in terms of the physics describing compact binary mergers.

Contact: Sarah Caudill


Gravitational Waves: Computer modelling to design the laser interferometers for the Einstein telescope

A new field of instrument science led to the successful detection of gravitational waves by the LIGO detectors in 2015. We are now preparing the next generation of gravitational wave observatories, such as the Einstein Telescope, with the aim to increase the detector sensitivity by a factor of ten, which would allow, for example, to detect stellar-mass black holes from early in the universe when the first stars began to form. This ambitious goal requires us to find ways to significantly improve the best laser interferometers in the world.

Gravitational wave detectors, such as LIGO and VIRGO, are complex Michelson-type interferometers enhanced with optical cavities. We develop and use numerical models to study these laser interferometers, to invent new optical techniques and to quantify their performance. For example, we synthesize virtual mirror surfaces to study the effects of higher-order optical modes in the interferometers, and we use opto-mechanical models to test schemes for suppressing quantum fluctuations of the light field. We can offer several projects based on numerical modelling of laser interferometers. All projects will be directly linked to the ongoing design of the Einstein Telescope.

Contact: Andreas Freise


Gravitational Waves: Digging away the noise to find the signal

Gravitational Wave interferometers are extremely sensitive, but suffer from instrumental issues that produce noise that mimics astrophysical signals. This needs to be solved as much as possible before the data analysis. The problem is that instrumentalists don't know about analysis pipelines, and data analysts don't know about experimental details. We need your help to bridge the gap. This is a good opportunity to learn about both sides and contribute directly to a booming international field. We have several tools and new ideas for correlating noises with the state of the instrument. These need to be developed further, used on years of data, and written up. Will require Python, signal processing and statistics.

Contact: Bas Swinkels and Sarah Caudill


Gravitational Waves: Machine Learning techniques for GW Interferometers

The control of suspended optical cavities in the non linear regime. Gravitational Wave interferometers are extremely sensitive, however suffer from a very small control range, causing unlocks, reducing the robustness of these instruments. In this project we will use a table top replica of a suspended optical cavity, located in the new R&D laser lab at Nikhef, for the development of a neural network to construct the positions from free falling mirror by using beam images. A database with simulated beam images can be used to train various neural networks before deployment in the table top experiment. We are looking for a hands-on and enthusiastic master student, interested in machine learning and experienced in programming languages like Python. Contacts: Rob Walet, Frank Linde

Contact: Rob Walet and Frank Linde

VU LaserLaB: Measuring the electric dipole moment (EDM) of the electron

In collaboration with Nikhef and the Van Swinderen Institute for Particle Physics and Gravity at the University of Groningen, we have recently started an exciting project to measure the electric dipole moment (EDM) of the electron in cold beams of barium-fluoride molecules. The eEDM, which is predicted by the Standard Model of particle physics to be extremely small, is a powerful probe to explore physics beyond this Standard Model. All extensions to the Standard Model, most prominently supersymmetry, naturally predict an electron EDM that is just below the current experimental limits. We aim to improve on the best current measurement by at least an order of magnitude. To do so we will perform a precision measurement on a slow beam of laser-cooled BaF molecules. With this low-energy precision experiment, we test physics at energies comparable to those of LHC!

At LaserLaB VU, we are responsible for building and testing a cryogenic source of BaF molecules. The main parts of this source are currently being constructed in the workshop. We are looking for enthusiastic master students to help setup the laser system that will be used to detect BaF. Furthermore, projects are available to perform simulations of trajectory simulations to design a lens system that guides the BaF molecules from the exit of the cryogenic source to the experiment.

Contact: Rick Bethlem

VU LaserLaB: Physics beyond the Standard model from molecules

Our team, with a number of staff members (Ubachs, Eikema, Salumbides, Bethlem, Koelemeij) focuses on precision measurements in the hydrogen molecule, and its isotopomers. The work aims at testing the QED calculations of energy levels in H2, D2, T2, HD, etc. with the most precise measurements, where all kind of experimental laser techniques play a role (cw and pulsed lasers, atomic clocks, frequency combs, molecular beams). Also a target of studies is the connection to the "Proton size puzzle", which may be solved through studies in the hydrogen molecular isotopes.

In the past half year we have produced a number of important results that are described in the following papers:

  • Frequency comb (Ramsey type) electronic excitations in the H2 molecule:

see: Deep-ultraviolet frequency metrology of H2 for tests of molecular quantum theory http://www.nat.vu.nl/~wimu/Publications/Altmann-PRL-2018.pdf

  • Precision measurement of an infrared transition in the HD molecule

see: Sub-Doppler frequency metrology in HD for tests of fundamental physics: https://arxiv.org/abs/1712.08438

  • The first precision study in molecular tritium T2

see: Relativistic and QED effects in the fundamental vibration of T2: http://arxiv.org/abs/1803.03161

  • Dissociation energy of the hydrogen molecule at 10^-9 accuracy paper submitted to Phys. Rev. Lett.
  • Probing QED and fundamental constants through laser spectroscopy of vibrational transitions in HD+

This is also a study of the hydrogen molecular ion HD+, where important results were obtained not so long ago, and where we have a strong activity: http://www.nat.vu.nl/~wimu/Publications/ncomms10385.pdf

These five results mark the various directions we are pursuing, and in all directions we aim at obtaining improvements. Specific projects with students can be defined; those are mostly experimental, although there might be some theoretical tasks, like performing calculations of hyperfine structures. Contact: Wim Ubachs Kjeld Eikema Rick Bethlem

2019:

Dark Matter: XENON1T Data Analysis

The XENON collaboration has used the XENON1T detector to achieve the world’s most sensitive direct detection dark matter results and is currently building the XENONnT successor experiment. The detectors operate at the Gran Sasso underground laboratory and consist of so-called dual-phase xenon time-projection chambers filled with ultra-pure xenon. Our group has an opening for a motivated MSc student to do analysis with the data from the XENON1T detector. The work will consist of understanding the detector signals and applying machine learning tools such as deep neutral networks to improve the reconstruction performance in our Python-based analysis tool, following the approach described in arXiv:1804.09641. The final goal is to improve the energy and position reconstruction uncertainties for the dark matter search. There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.

Contact: Patrick Decowski and Auke Colijn


Theory: The Effective Field Theory Pathway to New Physics at the LHC

A very promising framework to parametrise in a robust and model-independent way deviations from the Standard Model (SM) induced by new heavy particles is the Standard Model Effective Field Theory (SMEFT). In this formalism, Beyond the SM effects are encapsulated in higher-dimensional operators constructed from SM fields respecting their symmetry properties. In this project, we aim to carry out a global analysis of the SMEFT from high-precision LHC data, including Higgs boson production, flavour observables, and low-energy measurements. This analysis will be carried out in the context of the recently developed SMEFiT approach [1] based on Machine Learning techniques to efficiently explore the complex theory parameter space. The ultimate goal is either to uncover glimpses of new particles or interactions at the LHC, or to derive the most stringent model-independent bounds to date on general theories of New Physics.

[1] https://arxiv.org/abs/1901.05965

Contact: Juan Rojo

Theory: Pinning down the initial state of heavy-ion collisions with Machine Learning

It has been known for more than three decades that the parton distribution functions (PDFs) of nucleons bound within heavy nuclei are modified with respect to their free-nucleon counterparts. Despite active experimental and theoretical investigations, the underlying mechanisms that drive these in-medium modifications of nucleon substructure have yet to be fully understood. The determination of nuclear PDFs is a topic of high relevance in order both to improve our fundamental understanding of the strong interactions in the nuclear environment, as well as and for the interpretation of heavy ion collisions at RHIC and the LHC, in particular for the characterization of the Quark-Gluon Plasma. The goal of this project is to exploit Machine Learning and Artificial Intelligence tools [1,2] (neural networks trained by stochastic gradient descent) to pin down the initial state of heavy ion collisions by using recent measurements from proton-lead collisions at the LHC. Emphasis will be put on the poorly-known nuclear modifications of the gluon PDFs, which are still mostly terra incognita and highly relevant for phenomenological applications. In addition to theory calculations, the project will also involve code development using modern AI/ML tools such as TensorFlow and Keras.

[1] https://arxiv.org/abs/1811.05858 [2] https://arxiv.org/abs/1410.8849

Contact: Juan Rojo

Theory: The High-Energy Muon Crisis and Perturbative QCD

The production of charmed meson from the collision of high-energy cosmic rays with air nucleons in the upper atmosphere provides an important component of the flux of high-energy muons and neutrinos that can be detected at cosmic ray experiments such as AUGER and neutrino telescopes such as KM3NET or IceCube. The production of forward muons from charmed meson decays is usually predicted from QCD models tuned to the data, rather than from first principles QCD calculation. Interestingly, the number of such high-energy muons observed by AUGER seems to differ markedly from current theory predictions. In this project we aim to exploit state-of-the-art perturbative and non-perturbative QCD techniques to compute the flux of high-energy muons from charm decays and make predictions for a number of experiments sensitive to them


[1] https://arxiv.org/abs/1904.12547 [2] https://arxiv.org/abs/1808.02034 [3] https://arxiv.org/abs/1511.06346

Contact: Juan Rojo


ATLAS: The lifetime of the Higgs boson

While the Higgs boson was discovered in 2012, many of its properties still remain unconstrained. This master student project revolves around one such property, the lifetime of the Higgs boson. The lifetime can be obtained by measuring the width of the boson, but because the width is a few hundred times smaller than the detector resolution, a direct measurement is impossible at the moment. But there is an idea to overcome that limitation. By utilizing the interference between the Higgs boson decay and background processes we can perform an indirect measurement. This measurement potentially has the sensitivity that will allow us to perform a measurement of the width (or lifetime) as predicted by the Standard Model. Specifically, the master project will be about predicting the sensitivity of this measurement for different predictions of the Higgs width. The project is on the interface of theory and experiment, making use of Monte Carlo generators and the standard HEP analysis tools (ROOT, C++, python).

Contact: Michiel Veen or Hella Snoek & Ivo van Vulpen

ATLAS: The Next Generation

After the observation of the coupling of Higgs bosons to fermions of the third generation, the search for the coupling to fermions of the second generation is one of the next priorities for research at CERN's Large Hadron Collider. The search for the decay of the Higgs boson to two charm quarks is very new [1] and we see various opportunities for interesting developments. For this project we propose improvements in reconstruction (using exclusive decays), advanced analysis techiques (using deep learning methods) and expanding the new physics models (e.g. including a search for off-diagonal H->uc couplings). Another opportunity would be the development of the first statistical combination of results between the ATLAS and CMS experiment, which could significantly improve the discovery potentional.

[1] https://arxiv.org/abs/1802.04329

Contact: Tristan du Pree and Marko Stamenkovic

ATLAS: The Most Energetic Higgs Boson

The production of Higgs bosons at the highest energies could give the first indications for deviations from the standard model of particle physics, but production energies above 500 GeV have not been observed yet [1]. The LHC Run-2 dataset, collected during the last 4 years, might be the first opportunity to observe such processes, and we have various ideas for new studies. Possible developments include the improvement of boosted reconstruction techniques, for example using multivariate deep learning methods. Also, there are various opportunities for unexplored theory interpretations (using the MadGraph event generator), including effective field theory models (with novel ‘morphing’ techniques) and the study of the Higgs boson’s self coupling.

[1] https://arxiv.org/abs/1709.05543

Contact: Tristan du Pree and Brian Moser

LHCb: Measurement of Central Exclusive Production Rates of Chi_c using converted photons in LHCb

Central exclusive production (CEP) of particles at the LHC is characterised by a extremely clean signature. Differently from the typical inelastic collisions where many particles are created resulting in a so-called Primary Vertex, CEP events have only the final state particles of interest. In this project the particle of interest is a pair of charmed quarks creating a chi_c particle. In theory this process is generated by a long range gluon exchange and can elucidate the nature of the strong force, described by the quantum chromodynamics in the the standard model. The proposed work involves analysing a pre-existing dataset with reconstructed chi_c and simulating events at the LHCb in order to obtain the relative occurrence rate of each chi_c species (spins 0, 1, 2), a quantity that can be easily compared to theoretical predictions.

Contact: Kazu Akiba

LHCb: Optimization studies for Vertex detector at the High Lumi LHCb

The LHCb experiment is dedicated to measure tiny differences between matter and antimatter through the precise study of rare processes involving b or c quarks. The LHCb detector will undergo a major modification in order to dramatically increase the luminosity and be able to measure indirect effects of physics beyond the standard model. In this environment, over 42 simultaneous collisions are expected to happen at a time interval of 200 ps where the two proton bunches overlap. The particles of interest have a relatively long lifetime and therefore the best way to distinguish them from the background collisions is through the precise reconstruction of displaced vertices and pointing directions. The new detector considers using extremely recent or even future technologies to measure space (with resolutions below 10 um) and time (100 ps or better) to efficiently reconstruct the events of interest for physics. The project involves changing completely the LHCb Vertex Locator (VELO) design in simulation and determine what can be the best performance for the upgraded detector, considering different spatial and temporal resolutions.

Contact: Kazu Akiba

LHCb: Measurement of charge multiplication in heavily irradiated sensors

During the R&D phase for the LHCb VELO Upgrade detector a few sensor prototypes were irradiated to the extreme fluence expected to be achieved during the detector lifetime. These samples were tested using high energy particles at the SPS facility at CERN with their trajectories reconstructed by the Timepix3 telescope. A preliminary analysis revealed that at the highest irradiation levels the amount of signal observed is higher than expected, and even larger than the signal obtained at lower doses. At the Device Under Test (DUT) position inside the telescope, the spatial resolution attained by this system is below 2 um. This means that a detailed analysis can be performed in order to study where and how this signal amplification happens within the 55x55 um^2 pixel cell. This project involves analysing the telescope and DUT data to investigate the charge multiplication mechanism at the microscopic level.

Contact: Kazu Akiba

Detector R&D: Studying fast timing detectors

Fast timing detectors are the solution for future tracking detectors. In future LHC operation conditions and future colliders, more and more particles are produced per collision. The high particle densities make it increasingly more difficult to separate particle trajectories with the spatial information that current silicon tracking detectors provide. A solution would be to add very precise (in order of 10ps) timestamps to the spatial measurements of the particle trackers. A good understanding of the performance of fast timing detectors is necessary. With the user of a pulsed laser in the lab we study the characteristics of several prototype detectors.

Contact: Hella Snoek, Martin van Beuzekom, Kazu Akiba, Daniel Hynds

Detector R&D: Laser Interferometer Space Antenna (LISA)

The space-based gravitational wave antenna LISA is without doubt one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecrafts that are separated by a few million kilometers to measure tiny variations in the distances between test-masses located in each spacecraft to detect the gravitational waves from sources such as supermassive black holes. The triangular constellation of the LISA mission is dynamic requiring a constant fine tuning related to the pointing of the laser links between the spacecrafts and a simultaneous refocusing of the telescope. The noise sources related to the laser links are expected to provide a dominant contribution to the LISA performance.

An update and extension of the LISA science simulation software is needed to assess the hardware development for LISA at Nikhef, TNO and SRON. A position is therefore available for a master student to study the impact of instrumental noise on the performance of LISA. Realistic simulations based on hardware (noise) characterization measurements that were done at TNO will be carried out and compared to the expected tantalizing gravitational wave sources.

Key words: LISA, space, gravitational waves, simulations, signal processing

Contact: Niels van Bakel,Ernst-Jan Buis

Detector R&D: Spectral X-ray imaging - Looking at colours the eyes can't see

When a conventional X-ray image is made to analyse the composition of a sample, or to perform a medical examination on a patient, one acquires an image that only shows intensities. One obtains a ‘black and white’ image. Most of the information carried by the photon energy is lost. Lacking spectral information can result in an ambiguity between material composition and amount of material in the sample. If the X-ray intensity as a function of the energy can be measured (i.e. a ‘colour’ X-ray image) more information can be obtained from a sample. This translates to less required dose and/or to a better understanding of the sample that is being investigated. For example, two fields that can benefit from spectral X-ray imaging are mammography and real time CT.

X-ray detectors based on Medipix/Timepix pixel chips have spectral resolving capabilities and can be used to make polychromatic X-ray images. Medipix and Timepix chips have branched from pixel chips developed for detectors for high energy physics collider experiments.

Activities in the field of (spectral) CT scans are performed in a collaboration between two institutes (Nikhef and CWI) and two companies (ASI and XRE) Some activities that students can work on:

- Medical X-ray imaging (CT and conventional X-ray images): Detection of iodine contrast agent. Detection of calcifications (hint for a tumour).

- Material research: Using spectral information to identify materials and recognize compounds.

- Determining how much existing applications can benefit from spectral X-ray imaging and looking for potential new applications.

- Characterizing, calibrating, optimizing X-ray imaging detector systems.

Contact: Martin Fransen

Detector R&D: Holographic projector

A difficulty in generating holograms (based on the interference of light) is the required dense pixel pitch. One would need a pixel pitch of less than 200 nanometer. With larger pixels artefacts occur due to spatial under sampling. A pixel pitch of 200 nanometer is difficult, if not, impossible, to achieve, especially for larger areas. Another challenge is the massive amount of computing power that would be required to control such a dense pixel matrix.

A new holographic projection method has been developed that reduces under sampling artefacts for projectors with a ‘low’ pixel density. It uses 'pixels' at random but known positions, resulting in an array of (coherent) light points that lacks (or has strongly surpressed) spatial periodicity. As a result a holographic projector can be built with a significantly lower pixel density and correspondingly less required computing power. This could bring holography in reach for many applications like display, lithography, 3D printing, metrology, etc...

Of course, nothing comes for free: With less pixels, holograms become noisier and the contrast will be reduced (not all light ends up in the hologram). The questions: How does the quality of a hologram depend on pixel density? How do we determine projector requirements based on requirements for hologram quality?

Requirements for a hologram can be expressed in terms of: Noise, contrast, resolution, suppression of under sampling artefacts, etc..

For this project we are building a proof of concept holographic emitter. This set-up will be used to verify simulation results (and also to project some cool holograms of course).

Students can do hands on lab-work (building and testing the proto-type projector) and/or work on setting up simulation methods and models. Simulations can be highly parallelel and are preferably written for parallel/multithreading computing and/or GPU computing.

Contact: Martin Fransen

KM3NeT: Reconstruction of first neutrino interactions in KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first few strings with sensitive photodetectors have been deployed at both the Italian and the French detector sites. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In order to identify neutrinos an accurate reconstruction and optimal understanding of the backgrounds are crucial. In this project we will use the available data together with simulations to optimally identify and reconstruct the first neutrino interactions in the KM3NeT detector (applying also machine learning for background suppression) and with this pave the path towards accurate neutrino oscillation measurements and neutrino astronomy.

Programming skills are essential, mostly root and C++ will be used.

Contact: Ronald Bruijn Dorothea Samtleben'

KM3NeT: Acoustic detection of ultra-high energy cosmic-ray neutrinos (2 projects)

The study of the cosmic neutrinos of energies above 1017 eV, the so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent astrophysical sources, such as gamma ray bursts, supernovae or even dark matter. In addition, the observation of high energy neutrinos may provide a unique tool to study interactions at high energies. The energy deposition of these extreme neutrinos in water induce a thermo- acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope.

The work will be executed at the Nikhef institute and/or the TNO laboratories in Delft. In this project there are two opportunities for master students to participate:
student project 1: Hardware development on fiber optics hydrophones technology Goal: characterise existing proto-type optical fibre hydrophones in an anechoic basin at TNO laboratory. Data collection, calibration, characterisation, analysis of consequences for design future acoustic hydrophone neutrino telescopes; Keywords: Optical fiber technology, signal processing, electronics, lab. student project 2: Investigation of ultra-high energy neutrinos and their interactions with matter. Goal: simulate (currently imperfectly modelled) interaction for extremely high energy interactions, characterise differences with currently available physics models and impact on physics reach for future acoustic hydrophone neutrino telescopes; Keywords: Monte Carlo simulations, particle physics, cosmology.

Further information: Info on ultra-high energy neutrinos can be found at: http://arxiv.org/abs/1102.3591; Info on acoustic detection of neutrinos can be found at: http://arxiv.org/abs/1311.7588

Contact: Ernst-Jan Buis and Ivo van Vulpen'

KM3NeT: Applying state-of-the-art reconstruction software to 10-years of Antares data

While the KM3NeT neutrino telescope is being constructed in the deep waters of the Mediterranean Sea, data from its precursor (Antares) have been accumulated for more than 10 years. The main objective of these neutrino telescopes is to determine the origin of (cosmic) neutrinos. The accuracy of the determination of the origin of neutrinos critically depends on the probability density function (PDF) of the arrival time of Cherenkov light produced by relativistic charged particles emerging from a neutrino interaction in the sea. It has been shown that these PDFs can be calculated from first principles and that the obtained values can efficiently be interpolated in 4 and 5 dimensions, without compromising the functional dependencies. The reconstruction software based on this input yields indeed for KM3NeT the best resolution. This project is aimed at applying the KM3NeT software to available Antares data.

Contact: Maarten de Jong

HiSPARC: Extensive Air Shower Reconstruction using Machine Learning

An important aspect of high energy cosmic ray research is the reconstruction of the direction and energy of the primary cosmic ray. This is done by measuring the footprint of the extensive air shower initiated by the cosmic ray. The goal of this project is to advance the creation of a reconstruction algorithm based on machine learning (ML) techniques.

A previous master student has made great progress in the creation of a ML algorithm for the direction reconstruction. The algorithm was trained on simulations and applied to real data. The method works quite well but we expect that better results can be achieved by improving the simulated data set. In this project you will implement a more accurate description of the photomultiplier tube in the simulation pipeline and check if the reconstruction will improve. The next step would be to advance the algorithm towards energy reconstruction. This means upscaling the current method and will involve the creation and manipulation of large simulated data sets.

The HiSPARC group is small. As a student you can have a big impact and there is freedom to tailor your own project. The proposed project is for students with a particular interest in computational (astro)physics. Advanced programming skills (mainly Python) and Linux knowledge are desirable.

Contact: Kasper van Dam en Bob van Eijk

VU LaserLaB: Measuring the electric dipole moment (EDM) of the electron

In collaboration with Nikhef and the Van Swinderen Institute for Particle Physics and Gravity at the University of Groningen, we have recently started an exciting project to measure the electric dipole moment (EDM) of the electron in cold beams of barium-fluoride molecules. The eEDM, which is predicted by the Standard Model of particle physics to be extremely small, is a powerful probe to explore physics beyond this Standard Model. All extensions to the Standard Model, most prominently supersymmetry, naturally predict an electron EDM that is just below the current experimental limits. We aim to improve on the best current measurement by at least an order of magnitude. To do so we will perform a precision measurement on a slow beam of laser-cooled BaF molecules. With this low-energy precision experiment, we test physics at energies comparable to those of LHC!

At LaserLaB VU, we are responsible for building and testing a cryogenic source of BaF molecules. The main parts of this source are currently being constructed in the workshop. We are looking for enthusiastic master students to help setup the laser system that will be used to detect BaF. Furthermore, projects are available to perform simulations of trajectory simulations to design a lens system that guides the BaF molecules from the exit of the cryogenic source to the experiment.

Contact: Rick Bethlem

VU LaserLab: Physics beyond the Standard model from molecules

Our team, with a number of staff members (Ubachs, Eikema, Salumbides, Bethlem, Koelemeij) focuses on precision measurements in the hydrogen molecule, and its isotopomers. The work aims at testing the QED calculations of energy levels in H2, D2, T2, HD, etc. with the most precise measurements, where all kind of experimental laser techniques play a role (cw and pulsed lasers, atomic clocks, frequency combs, molecular beams). Also a target of studies is the connection to the "Proton size puzzle", which may be solved through studies in the hydrogen molecular isotopes.

In the past half year we have produced a number of important results that are described in the following papers:

  • Frequency comb (Ramsey type) electronic excitations in the H2 molecule:

see: Deep-ultraviolet frequency metrology of H2 for tests of molecular quantum theory http://www.nat.vu.nl/~wimu/Publications/Altmann-PRL-2018.pdf

  • Precision measurement of an infrared transition in the HD molecule

see: Sub-Doppler frequency metrology in HD for tests of fundamental physics: https://arxiv.org/abs/1712.08438

  • The first precision study in molecular tritium T2

see: Relativistic and QED effects in the fundamental vibration of T2: http://arxiv.org/abs/1803.03161

  • Dissociation energy of the hydrogen molecule at 10^-9 accuracy paper submitted to Phys. Rev. Lett.
  • Probing QED and fundamental constants through laser spectroscopy of vibrational transitions in HD+

This is also a study of the hydrogen molecular ion HD+, where important results were obtained not so long ago, and where we have a strong activity: http://www.nat.vu.nl/~wimu/Publications/ncomms10385.pdf

These five results mark the various directions we are pursuing, and in all directions we aim at obtaining improvements. Specific projects with students can be defined; those are mostly experimental, although there might be some theoretical tasks, like:

  • Performing calculations of hyperfine structures

As for the theory there might also be an international connection for specifically bright theory students: we collaborate closely with prof. Krzystof Pachucki; we might find an opportunity for a student to perform (the best !) QED calculations in molecules, when working in Warsaw and partly in Amsterdam. Prof Frederic Merkt from the ETH Zurich, an expert in the field, will come to work with us on "hydrogen" during August - Dec 2018 while on sabbatical.

Contact: Wim Ubachs Kjeld Eikema Rick Bethlem

2018:

Theory: Stress-testing the Standard Model at the high-energy frontier

A suitable framework to parametrise in a model-independent way deviations from the SM induced by new heavy particles is the Standard Model Effective Field Theory (SMEFT). In this formalism, bSM effects are encapsulated in higher-dimensional operators constructed from SM fields respecting their symmetry properties. Here we aim to perform a global analysis of the SMEFT from high-precision LHC data. This will be achieved by extending the NNPDF fitting framework to constrain the SMEFT coefficients, with the ultimate aim of identifying possible bSM signals.

Contact: Juan Rojo

Theory: The quark and gluon internal structure of heavy nuclei in the LHC era

A precise knowledge of the parton distribution functions (PDFs) of the proton is essential in order to make predictions for the Standard Model and beyond at hadron colliders. The presence of nuclear medium and collective phenomena which involve several nucleons modifies the parton distribution functions of nuclei (nPDFs) compared to those of a free nucleon. These modifications have been investigated by different groups using global analyses of high energy nuclear reaction world data. It is important to determine the nPDFs not only for establishing perturbative QCD factorisation in nuclei but also for applications to heavy-ion physics and neutrino physics. In this project the student will join an ongoing effort towards the determination of a data-driven model of nPDFs, and will learn how to construct tailored Artificial Neural Networks (ANNs).

"Further information [here]

Contact: Juan Rojo

Theory: Combined QCD analysis of parton distribution and fragmentation functions

The formation of hadrons from quarks and gluons, or collectively partons, is a fundamental QCD process that has yet to be fully understood. Since parton-to-hadron fragmentation occurs over long-distance scales, such information can only be extracted from experimental observables that identify mesons and baryons in the final state. Recent progress has been made to determine these fragmentation functions (FFs) from charged pion and kaon production in single inclusive e+e−-annihilation (SIA) and additionally pp-collisions and semi-inclusive deep inelastic scattering (SIDIS). However, charged hadron production in unpolarized pp and inelastic lepton-proton scattering also require information about the momentum distributions of the quarks and gluons in the proton, which is encoded in non-perturbative parton distribution functions (PDFs). In this project, a simultaneous treatment of both PDFs and FFs in a global QCD analysis of single inclusive hadron production processes will be made to determine the individual parton-to-hadron FFs. Furthermore, a robust statistical methodology with an artificial neural network learning algorithm will be used to obtain a precise estimation of the FF uncertainties. This work will emphasis in particular the impact of pp-collision and SIDIS data on the gluon and separated quark/anti-quark FFs, respectively.

"Further information [here]

Contact: Juan Rojo


ALICE: Charm is in the Quark Gluon Plasma

The goal of heavy-ion physics is to study the Quark Gluon Plasma (QGP), a hot and dense medium where quarks and gluons move freely over large distances, larger than the typical size of a hadron. Hydrodynamic simulations expect that the QGP will expand under its own pressure, and cool while expanding. These simulations are particularly successful in describing some of the key observables measured experimentally, such as particle spectra and various orders of flow harmonics. Charm quarks are produced very early during the evolution of a heavy-ion collision and can thus serve as an idea probe of the properties of the QGP. The goal of the project is to study higher order flow harmonics (e.g. triangular flow - v3) that are more sensitive to the transport properties of the QGP for charm-mesons, such as D0, D*, Ds. This will be the first ever measurement of this kind.

Contact: Panos Christakoglou

ALICE: Probing the time evolution of particle production in the Quark-Gluon Plasma

Particle production is governed by conservation laws, such as local charge conservation. The latter ensures that each charged particle is balanced by an oppositely-charged partner, created at the same location in space and time. The charge-dependent angular correlations, traditionally studied with the balance function, have emerged as a powerful tool to probe the properties of the Quark-Gluon Plasma (QGP) created in high energy collisions. The goal of this project is to take full advantage of the unique, among all LHC experiments, capabilities of the ALICE detector that is able to identify particles to extend the studies to different particle species (e.g. pions, kaons, protons…). These studies are highly anticipated by both the experimental and theoretical communities.

Contact: Panos Christakoglou

ALICE: CP violating effects in QCD: looking for the chiral magnetic effect with ALICE at the LHC

Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.

Contact: Panos Christakoglou

LHCb: Searching for dark matter in exotic six-quark particles

3/4 of the mass in the Universe is of unknown type. Many hypotheses about this dark matter have been proposed, but none confirmed. Recently it has been proposed that it could be made of particles made of the six quarks uuddss. Such a particle could be produced in decays of heavy baryons. It is proposed to use Xi_b baryons produced at LHCb to search for such a state. The latter would appear as missing 4-momentum in a kinematically constrained decay. The project consists in optimising a selection and applying it to LHCb data. See arXiv:1708.08951

Contact: Patrick Koppenburg


LHCb: Measurement of BR(B0 → Ds+ Ds-)

This project aims to discover the branching fraction of the decay B0->Ds- Ds+. The decay B0->Ds- Ds+ is quite rare, because it occurs through the exchange of a W-boson between the b and the d-quark of the B0-meson. This decay proceeds via Cabibbo-suppressed W-exchange and has not yet been observed; theoretical calculations predict a branching fraction at the order of 10^-5 with a best experimental upper limit of 3.6x10^-5. A measurement of the decay rate of B0 -> Ds+Ds- relative to that of B0 -> D+D- can provide an estimate of the W-exchange contribution to the latter decay, a crucial piece of information for extracting the CKM angle gamma from B0 -> D(*)D(*). The aim is to determine the relative branching fraction of B0->Ds+Ds- with respect to B0->Ds+D- decays (which has the best known branching ratio at present, (7.2 +- 0.8)x10^-3), in close collaboration with the PhD. The aim is that this project results in a journal publication on behalf of the LHCb collaboration. For this project computer skills are needed. The ROOT programme and C++ and/or Python macros are used. This is a project that is closely related to previous analyses in the group. Weekly video meetings with CERN coordinate the efforts with in the LHCb collaboration. Relevant information: [1] M.Jung and S.Schacht, "Standard Model Predictions and New Physics Sensitivity in B -> DD Decays" https://arxiv.org/pdf/1410.8396.pdf [2] L.Bel, K.de Bruyn, R. Fleischer, M.Mulder, N.Tuning, "Anatomy of B -> DD Decays" https://arxiv.org/pdf/1505.01361.pdf [3] A.Zupanc et al [Belle Collaboration] "Improved measurement of B0 -> DsD+ and search for B0 -> Ds+Ds at Belle" https://arxiv.org/pdf/hep-ex/0703040.pdf [4] B.Aubert et al. [Babar Collaboration] "Search for the W-exchange decays B0 -> DD+" https://arxiv.org/pdf/hep-ex/0510051.pdf [5] R.Aaij et al. [LHCb Collaboration], "First observations of B0s -> D+D, Ds+D and D0D0 decays" https://arxiv.org/pdf/1302.5854.pdf

Contact: Niels Tuning, Michele Veronesi (PhD), Sevda Esen (postdoc)

LHCb: Measurement of relative ratio of B+ → D0D+ and B+ → D0Ds decays

This decay is closely related to B0->Ds- Ds+ (see above), and close collaboration between the two master projects is foreseen. The decay mode B+->D0D+ is expected to be dominated by tree diagrams with some additional contributions from penguin diagrams. Assuming SU(3) symmetry, measurement of its branching fraction relative to Cabibbo-favored B+->D0D will enable better understanding of penguin contributions to the CP violating mixing phase. Relevant information: [1] L.Bel, K.de Bruyn, R. Fleischer, M.Mulder, N.Tuning, "Anatomy of B -> DD Decays" https://arxiv.org/pdf/1505.01361.pdf [2] R.Aaij et al. [LHCb Collaboration], "First observations of B0s -> D+D, Ds+D and D0D0 decays" https://arxiv.org/pdf/1302.5854.pdf [3] PDG: http://pdglive.lbl.gov/BranchingRatio.action?desig=261&parCode=S041

Contact: Niels Tuning, Michele Veronesi (PhD), Sevda Esen (postdoc)


Virgo: Fast determination of gravitational wave properties

In the era of multi-messenger astronomy, the development of fast, accurate and computationally cheap methods for inference of properties of gravitational wave signal is of paramount importance. In this work, we will work on the development of rapid bayesian parameter estimation method for binary neutron stars as well as precessing black hole binaries. Bayesian parameter estimation methods require the evaluation of a likelihood that describe the probability of obtaining data for a given set of model parameters, which are parameters of gravitational wave signals in this particular problem. Bayesian inference for gravitational wave parameter estimation may require millions of these evaluation making them computationally costly. This work will combine the benefits of machine learning/ deep learning methods and order reduction methods of gravitational wave source modelling to speed up Bayesian inference of gravitational waves.

Contact: Sarah Caudill

Virgo: Simulations of Binary Neutron Star Mergers and applications for multimessenger astronomy

With the detection of the binary neutron star merger in August 2017 (GW170817) a new era of multi-messenger astronomy started. GW170817 proved that neutron star mergers are ideal laboratories to constrain the equation of state of cold supranuclear matter, to study the central engines of short GRBs, and to understand the origin and production of heavy elements. The fundamental tool to understand the last stages of the binary dynamics are numerical relativity simulations. In this project the student will be introduced to the basics of numerical relativity simulations of binary neutron star simulations and will be able to perform simulations on its own. Based on these simulations and the first experience it will be possible to focus on one of the following aspects:

- the estimation of the ejected material released from the merger and the development of models for the electromagnetic signals

- further improvement of gravitational waveform models including numerical relativity information

- further improvement of the construction of the initial conditions of binary neutron star simulations

- code improvements of the evolution code incorporating additional microphysical aspects as magnetic fields, tabulated equation of states, or neutrino leakage schemes.

- studying the merger properties of neutron stars with exotic objects as boson or axion stars.

Contact: Tim Dietrich

Virgo: Measuring cosmological parameters from gravitational-wave observations of compact binaries

Gravitational wave observation of the binary neutron star merger GW170817 with its coincident optical counterpart led to a first "standard siren" measurement of the Hubble parameter independent of the cosmological distance ladder. While multiple similar observations are expected to improve the precision of the measurement, a statistical method of cross correlation with galaxy catalogues of gravitational-wave distance estimates is expected to work even without identified electromagnetic transients, and for binary black hole mergers in particular. The project would primarily be a study of various systematic effects in this analysis and correcting for them. The work will involve use of computational techniques to analyze LIGO-Virgo data. Some prior experience of programmimg is expected.

Contact: Archisman Ghosh and Chris Van Den Broeck

Detector R&D: Spectral X-ray imaging - Looking at colours the eyes can't see

When a conventional X-ray image is made to analyse the composition of a sample, or to perform a medical examination on a patient, one acquires an image that only shows intensities. One obtains a ‘black and white’ image. Most of the information carried by the photon energy is lost. Lacking spectral information can result in an ambiguity between material composition and amount of material in the sample. If the X-ray intensity as a function of the energy can be measured (i.e. a ‘colour’ X-ray image) more information can be obtained from a sample. This translates to less required dose and/or to a better understanding of the sample that is being investigated. For example, two fields that can benefit from spectral X-ray imaging are mammography and real time CT.

X-ray detectors based on Medipix/Timepix pixel chips have spectral resolving capabilities and can be used to make polychromatic X-ray images. Medipix and Timepix chips have branched from pixel chips developed for detectors for high energy physics collider experiments.

Activities in the field of (spectral) CT scans are performed in a collaboration between two institutes (Nikhef and CWI) and two companies (ASI and XRE).

Some activities that students can work on:

- Medical X-ray imaging (CT and ‘flat’ X-ray images): Detection of iodine contrast agent. Detection of calcifications (hint for a tumour).

- Material research: Using spectral information to identify materials and recognise compounds.

- Determine how much existing applications can benefit from spectral X-ray imaging and look for potential new applications.

- Characterise, calibrate, optimise X-ray imaging detector systems.

Contact: Martin Fransen

Detector R&D: Compton camera

In the Nikhef R&D group we develop instrumentation for particle physics but we also investigate how particle physics detectors can be used for different purposes. A successful development is the Medipix chip that can be used in X-ray imaging. For use in large scale medical applications compton scattering limits however the energy resolving possibilities. You will investigate whether it is in principle possible to design a X-ray application that detects the compton scattered electron and the absorbed photon. Your ideas can be tested in practice in the lab where a X-ray scan can be performed.

Contact: Martin Fransen

Detector R&D: Holographic projector

A difficulty in generating holograms (based on the interference of light) is the required dense pixel pitch. One would need a pixel pitch of less than 200 nanometer. With larger pixels artefacts occur due to spatial under sampling. A pixel pitch of 200 nanometer is difficult, if not, impossible, to achieve, especially for larger areas. Another challenge is the massive amount of computing power that would be required to control such a dense pixel matrix.

A new holographic projection method has been developed that reduces under sampling artefacts for projectors with a ‘low’ pixel density. It is using 'pixels' at random but known positions, resulting in an array of (coherent) light points that lacks (or has strongly surpressed) spatial periodicity. As a result a holographic projector can be built with a significantly lower pixel density and correspondingly less required computing power. This could bring holography in reach for many applications like display, lithography, 3D printing, metrology, etc..

Of course, nothing comes for free: With less pixels, holograms become noisier and the contrast will be reduced. The big question: How do we determine the requirements (in terms of pixel density, pixel positioning, etc..) for the holographic projector based on requirements for the holograms? Requirements for a hologram can be expressed in terms of: Noise, contrast, resolution, suppression of under sampling artefacts, etc..

For this project we are building a proof of concept holographic emitter. This set-up will be used to verify simulation results (and also to project some cool holograms of course).

Students can do hands on lab-work (building and testing the proto type projector) and/or work on setting up simulation methods and models. Simulations in this field can be highly parallelized and are preferably written for parallel computing and/or GPU computing.


Contact: Martin Fransen

Detector R&D: Laser Interferometer Space Antenna (LISA)

The space-based gravitational wave antenna LISA is without doubt one of the most challenging space missions ever proposed. ESA plans to launch around 2030 three spacecrafts that are separated by a few million kilometers to measure tiny variations in the distances between test-masses located in each spacecraft to detect the gravitational waves from sources such as supermassive black holes. The triangular constellation of the LISA mission is dynamic requiring a constant fine tuning related to the pointing of the laser links between the spacecrafts and a simultaneous refocusing of the telescope. The noise sources related to the laser links are expected to provide a dominant contribution to the LISA performance.

An update and extension of the LISA science simulation software is needed to assess the hardware development for LISA at Nikhef, TNO and SRON. A position is therefore available for a master student to study the impact of instrumental noise on the performance of LISA. Realistic simulations based on hardware (noise) characterization measurements that were done at TNO will be carried out and compared to the expected tantalizing gravitational wave sources.

Key words: LISA, space, gravitational waves, simulations, signal processing

Contact: Niels van Bakel,Ernst-Jan Buis

KM3NeT : Reconstruction of first neutrino interactions in KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first two strings with sensitive photodetectors have been deployed 2015&2016. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In order to identify neutrinos an accurate reconstruction and optimal understanding of the backgrounds are crucial. In this project we will use the available data to identify and reconstruct the first neutrino interactions in the KM3NeT detector and with this pave the path towards neutrino astronomy.

Programming skills are essential, mostly root and C++ will be used.

Contact: Ronald Bruijn

ANTARES: Analysis of IceCube neutrino sources.

The only evidence for high energetic neutrinos from cosmic sources so far comes from detections with the IceCube detector. Most of the detected events were reconstructed with a large uncertainty on their direction, which has prevented an association to astrophysical sources. Only for the high energetic muon neutrino candidates a high resolution in the direction has been achieved, but also for those no significant correlation to astrophysical sources has to date been detected. The ANTARES neutrino telescope has since 2007 continuously taken neutrino data with high angular resolution, which can be exploited to further scrutinize the locations of these neutrino sources. In this project we will address the neutrino sources in a stacked analysis to further probe the origin of the neutrinos with enhanced sensitivity.

Programming skills are essential, mainly C++ and root will be used.

Contact: Dorothea Samtleben

VU LaserLaB: Measuring the electric dipole moment (EDM) of the electron

In collaboration with Nikhef and the Van Swinderen Institute for Particle Physics and Gravity at the University of Groningen, we have recently started an exciting project to measure the electric dipole moment (EDM) of the electron in cold beams of barium-fluoride molecules. The eEDM, which is predicted by the Standard Model of particle physics to be extremely small, is a powerful probe to explore physics beyond this Standard Model. All extensions to the Standard Model, most prominently supersymmetry, naturally predict an electron EDM that is just below the current experimental limits. We aim to improve on the best current measurement by at least an order of magnitude. To do so we will perform a precision measurement on a slow beam of laser-cooled BaF molecules. With this low-energy precision experiment, we test physics at energies comparable to those of LHC!

At LaserLaB VU, we are responsible for building and testing a cryogenic source of BaF molecules. The main parts of this source are currently being constructed in the workshop. We are looking for enthusiastic master students to help setup the laser system that will be used to detect BaF. Furthermore, projects are available to perform simulations of trajectory simulations to design a lens system that guides the BaF molecules from the exit of the cryogenic source to the experiment.

Contact: Rick Bethlem


VU LaserLab: Physics beyond the Standard model from molecules

Our team, with a number of staff members (Ubachs, Eikema, Salumbides, Bethlem, Koelemeij) focuses on precision measurements in the hydrogen molecule, and its isotopomers. The work aims at testing the QED calculations of energy levels in H2, D2, T2, HD, etc. with the most precise measurements, where all kind of experimental laser techniques play a role (cw and pulsed lasers, atomic clocks, frequency combs, molecular beams). Also a target of studies is the connection to the "Proton size puzzle", which may be solved through studies in the hydrogen molecular isotopes.

In the past half year we have produced a number of important results that are described in the following papers:

  • Frequency comb (Ramsey type) electronic excitations in the H2 molecule:

see: Deep-ultraviolet frequency metrology of H2 for tests of molecular quantum theory http://www.nat.vu.nl/~wimu/Publications/Altmann-PRL-2018.pdf

  • Precision measurement of an infrared transition in the HD molecule

see: Sub-Doppler frequency metrology in HD for tests of fundamental physics: https://arxiv.org/abs/1712.08438

  • The first precision study in molecular tritium T2

see: Relativistic and QED effects in the fundamental vibration of T2: http://arxiv.org/abs/1803.03161

  • Dissociation energy of the hydrogen molecule at 10^-9 accuracy paper submitted to Phys. Rev. Lett.
  • Probing QED and fundamental constants through laser spectroscopy of vibrational transitions in HD+

This is also a study of the hydrogen molecular ion HD+, where important results were obtained not so long ago, and where we have a strong activity: http://www.nat.vu.nl/~wimu/Publications/ncomms10385.pdf

These five results mark the various directions we are pursuing, and in all directions we aim at obtaining improvements. Specific projects with students can be defined; those are mostly experimental, although there might be some theoretical tasks, like:

  • Performing calculations of hyperfine structures

As for the theory there might also be an international connection for specifically bright theory students: we collaborate closely with prof. Krzystof Pachucki; we might find an opportunity for a student to perform (the best !) QED calculations in molecules, when working in Warsaw and partly in Amsterdam. Prof Frederic Merkt from the ETH Zurich, an expert in the field, will come to work with us on "hydrogen" during August - Dec 2018 while on sabbatical.

Contact: Wim Ubachs Kjeld Eikema Rick Bethlem



2017:

The Modulation Experiment: Data Analysis

There exist a few measurements that suggest an annual modulation in the activity of radioactive sources. With a few groups from the XENON collaboration we have developed four sets of table-top experiments to investigate this effect on a few well known radioactive sources. The experiments are under construction in Purdue University (USA), a mountain top in Switzerland, a beach in Rio de Janeiro and the last one at Nikhef in Amsterdam. We urgently need a master student to (1) analyze the first big data set, and (2) contribute to the first physics paper from the experiment. We are looking for an all-round physicist with interest in both lab-work and data-analysis. The student will directly collaborate with the other groups in this small collaboration (around 10 people), and the goal is to have the first physics publication ready by the end of the project.

Contact: Auke Colijn

The XENON Dark Matter Experiment: Data Analysis

The XENON collaboration has started operating the XENON1T detector, the world’s most sensitive direct detection dark matter experiment. The Nikhef group is playing an important role in this experiment. The detector operates at the Gran Sasso underground laboratory and consists of a so-called dual-phase xenon time-projection chamber filled with 3200kg of ultra-pure xenon. Our group has an opening for a motivated MSc student to do data-analysis on this new detector. The work will consist of understanding the signals that come out of the detector and in particular focus on the so-called double scatter events. We are interested in developing methods in order to interpret the response of the detector better and are developing sophisticated statistical tools to do this. This work will include looking at data and developing new algorithms in our Python-based analysis tool. There will also be opportunity to do data-taking shifts at the Gran Sasso underground laboratory in Italy.

Contact: Patrick Decowski

XAMS Dark Matter R&D Setup

The Amsterdam Dark Matter group has built an R&D xenon detector at Nikhef. The detector is a dual-phase xenon time-projection chamber and contains about 4kg of ultra-pure liquid xenon. We plan to use this detector for the development of new detection techniques (such as utilizing new photosensors) and to improve the understanding of the response of liquid xenon to various forms of radiation. The results could be directly used in the XENON experiment, the world’s most sensitive direct detection dark matter experiment at the Gran Sasso underground laboratory. We have several interesting projects for this facility. We are looking for someone who is interested in working in a laboratory on high-tech equipment, modifying the detector, taking data and analyzing the data him/herself. You will "own" this experiment.

Contact: Patrick Decowski

LHCb: A Scintillator Fibers Tracker

The LHCb collaboration is upgrading the present tracking system constructing a new tracker based on scintillating fibers combined with silicon photo-multipliers (SiPM): the SciFi Tracker! Nikhef plays a key role in the project, as we will build the SciFi fibers modules, the cold-box enclosure housing the SiPMs, and a large part of the on-detector electronics. In all these areas, interesting test hardware and software has to be realized, and several research topics for a Master project are available, taking the student in contact with state-of-the-art particle detectors, in a large team of physicists and engineers. Possible collaborations with the Nikhef R&D group can also be envisaged.

Contact: Antonio Pellegrino

LHCb: Discovery of the Decay Lb --> p Ds+

This project aims to measure the branching fraction of the decay Lb->p Ds+ (bud -> uud + ds). The decay Lb->p Ds+ is quite rare, because it occurs through the transition of a b-quark to a u-quark. It has not been measured yet (although some LHCb colleagues claim to have seen it). This decay is interesting, because

1) It is sensitive to the b->u coupling (CKM-element Vub), which determination is heavily debated. 2) It can quantify non-factorisable QCD effects in b-baryon decays.

The decay is closely related to B0->pi-Ds+, which proceeds through a similar Feynman diagram. Also, the final state of B0->pi-Ds+ is almost identical to Lb->p Ds+. The aim is to determine the relative branching fraction of Lb->pDs+ with respect to B0->D+pi- decays, in close collaboration with the PhD (who will study BR(B0->pi-Ds+)/BR(B0->D+pi-) ). This project will result in a journal publication on behalf of the LHCb collaboration, written by you. For this project computer skills are needed. The ROOT programme and C++ and/or Python macros are used. This is a project that is closely related to previous analyses in the group. Weekly video meetings with CERN coordinate the efforts with in the LHCb collaboration. Relevant information:

[1] R.Aaij et al. [LHCb Collaboration], ``Determination of the branching fractions of B0s->DsK and B0->DsK, JHEP 05 (2015) 019 [arXiv:1412.7654 [hep-ex]]. [2] R. Fleischer, N. Serra and N. Tuning, ``Tests of Factorization and SU(3) Relations in B Decays into Heavy-Light Final States, Phys. Rev. D 83, 014017 (2011) [arXiv:1012.2784 [hep-ph]].

Contact: Niels Tuning and Lennaert Bel and Mick Mulder

LHCb: Measurement of B0 -> pi Ds- , the b -> u quark transition

This project aims to measure the branching fraction of the decay B0->pi Ds+. This decay is closely related to Lb->p Ds+ (see above), and close collaboration between the two master projects is foreseen. This research was started by a previous master student. The new measurement will finish the work, and include the new data from 2015 and 2016.

See Mick Mulders master thesis for more information.

Contact: Niels Tuning and Lennaert Bel and Mick Mulder

LHCb: A search for heavy neutrinos in the decay of W bosons at LHCb

Neutrinos are arguably the most mysterious of all known fundamental fermions as they are both much lighter than all others and only weakly interacting. It is thought that the tiny mass of neutrinos can be explained by their mixing with so-far unknown, much heavier, neutrino-like particles. In this research proposal we look for these new neutrinos in the decay of the SM W-boson using data with the LHCb experiment at CERN. The W boson is assumed to decay to a heavy neutrino and a muon. The heavy neutrino subsequently decays to a muon and a pair of quarks. Both like-sign and opposite-sign muon pairs will be studied. The result of the analysis will either be a limit on the production of the new neutrinos or the discovery of something entirely new.

Contact: Wouter Hulsbergen and Elena Dall'Occo


ALICE : Particle polarisation in strong magnetic fields

When two atomic nuclei, moving in opposite directions, collide off- center then the Quark Gluon Plasma (QGP) created in the overlap zone is expected to rotate. The nucleons not participating in the collision represent electric currents generating an intense magnetic field. The magnetic field could be as large as 10^{18} gauss, orders of magnitude larger than the strongest magnetic fields found in astronomical objects. Proving the existence of the rotation and/or the magnetic field could be done by checking if particles with spin are aligned with the rotation axis or if charged particles have different production rates relative to the direction of the magnetic field. In particular, the longitudinal and transverse polarisation of the Lambda^0 baryon will be studied. This project requires some affinity with computer programming.

Contact: Panos Christakoglou

ALICE : Blast-Wave Model in heavy-ion collisions

The goal of heavy-ion physics is to study the Quark Gluon Plasma (QGP), a hot and dense medium where quarks and gluons move freely over large distances, larger than the typical size of a hadron. Hydrodynamic simulations expect that the QGP will expand under its own pressure, and cool while expanding. These simulations are particularly successful in describing some of the key observables measured experimentally, such as particle spectra and elliptic flow. A reasonable reproduction of the same observables is also achieved with models that use parameterisations that resemble the hydrodynamical evolution of the system assuming a given freeze-out scenario, usually referred to as blast-wave models. The goal of this project is to work on different blast wave parametrisations, test their dependence on the input parameters and extend their applicability by including more observables studied in heavy-ion collisions in the global fit.

Contact: Panos Christakoglou

ALICE : Higher Harmonic Flow

When two ions collide, if the impact parameter is not zero, the overlap region is not isotropic. This spatial anisotropy of the overlap region is transformed into an anisotropy in momentum space through interactions between partons and at a later stage between the produced particles. It was recently realized that the overlap region of the colliding nuclei exhibits an irregular shape. These irregularities originate from the initial density profile of nucleons participating in the collision which is not smooth and is different from one event to the other. The resulting higher order flow harmonics (e.g. v3, v4, and v5, usually referred to as triangular, quadrangular, and pentangular flow, respectively) and in particular their transverse momentum dependence are argued to be more sensitive probes than elliptic flow not only of the initial geometry and its fluctuations but also of shear viscosity over entropy density (η/s). The goal of this project is to study v3, v4, and v5 for identified particles in collisions of heavy-ions at the LHC.

Contact: Panos Christakoglou

ALICE : Chiral Magnetic Effect and the Strong CP Problem

Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.

Contact: Panos Christakoglou

DR&D : Medical X-ray Imaging

With the upcoming of true multi-threshold X-Ray detectors the possibilities for Spectral Imaging with low dose, including spectral CT, is now a reality around the corner. The Medipix3RX chip, from the Medipix Collaboration (CERN) features up to 8 programmable thresholds which can select energy bins without a threshold scan. A number of projects could be derived from the R&D activities with the Medipix3RX within the Nikhef R&D group on X-ray imaging for medical applications:

  • Medipix3RX characterization in all its operation modes and gains.
  • Spectral CT and scarce sampling 3D reconstruction
  • Charge sharing: the charge-sum capabilities of the chip can be exploited to further understand the problem of charge sharing in pixelized detectors. A combination of the characterization of the charge-summing mode plus the use of both planar, and 3D sensors, at the light of MC simulation, could reveal valuable information about charge sharing.

Contact: Els Koffeman,Martin Fransen

DR&D : Compton camera

In the Nikhef R&D group we develop instrumentation for particle physics but we also investigate how particle physics detectors can be used for different purposes. A succesfull development is the Medipix chip that can be used in X-ray imaging. For use in large scale medical applications compton scattering limits however the energy resolving possibilities. You will investigate whether it is in principle possible to design a X-ray application that detects the compton scattered electron and the absorbed photon. Your ideas can be tested in practice in the lab where a X-ray scan can be performed.

Contact: Els Koffeman

KM3NeT : Reconstruction of first neutrino interactions in KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first two strings with sensitive photodetectors have been deployed 2015&2016, in total 30 to be deployed til end of next year. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. In order to identify neutrinos an accurate reconstruction and optimal understanding of the backgrounds are crucial. In this project we will use the available data to identify and reconstruct the first neutrino interactions in the KM3NeT detector and with this pave the path towards neutrino astronomy.

Programming skills are essential, mostly root and C++ will be used.

Contact: Ronald Bruijn

ANTARES: Analysis of IceCube neutrino sources.

The only evidence for high energetic neutrinos from cosmic sources so far comes from detections with the IceCube detector. Most of the detected events were reconstructed with a large uncertainty on their direction, which has prevented an association to astrophysical sources. Only for the high energetic muon neutrino candidates a high resolution in the direction has been achieved, but also for those no significant correlation to astrophysical sources has to date been detected. The ANTARES neutrino telescope has since 2007 continuously taken neutrino data with high angular resolution, which can be exploited to further scrutinize the locations of these neutrino sources. In this project we will address the neutrino sources in a stacked analysis to further probe the origin of the neutrinos with enhanced sensitivity.

Programming skills are essential, mainly C++ and root will be used.

Contact: Dorothea Samtleben


ATLAS: Implementation of Morphing techniques for ATLAS top physics analysis.

Perhaps the most promising gateway to physics beyond the Standard Model is the top quark, the heaviest elementary particle. Particularly interesting is how the different top quark spin states influence the angular distribution of electrons and other decays products, which can be measured very accurately. New interactions would alter this coupling, leading to decay patterns that are different from those predicted by the Standard Model. At Nikhef we are implementing NLO predictions of the so called dimension-6 operators to describe several measurable distributions. To confront these distributions with data, a continues parametrization is required. For this purpose, we want to introduce a novel technique in top quark analysis which is based on Morphing. The project consist of an implementation of Morphing to parametrize the top's angular distributions and to demonstrate that the paramdeters can be extracted in a fitting procedure using (pseudo)data.

Affinity with software is essential, mainly C++ and root will be used.

Contact: Marcel Vreeswijk

Theory – Probing electroweak symmetry breaking with Higgs pair production at the LHC and beyond

The measurement of Higgs pair production will be a cornerstone of the LHC program in the coming years. Double Higgs production provides a crucial window upon the mechanism of electroweak symmetry breaking, and has a unique sensitivity to a number of currently unknown Higgs couplings, like the Higgs self-coupling λ and the coupling between a pair of Higgs bosons and two vector bosons. In this project, the student will explore the feasibility of the measurement of Higgs pair production in the 4b final state both at the LHC and at future 100 TeV collider. A number of production modes will be considered, including gluon-fusion, vector-boson-fusion, as well as Higgs pair production in association with a top-quark pair. A key ingredient of the project will be the exploitation of multivariate techniques such as Artificial Neural Networks and other multivariate discriminants to enhance the ratio of di-Higgs signal over backgrounds.

The project involves to estimate the precision that can be achieved in the extraction of the Higgs self-coupling for a number of assumptions about the performance of the LHC detectors, and in particular to quantify the information that can be extracted from the Run II dataset with L = 300 1/fb . A similar approach will be applied to the determination of other unknown properties of the Higgs sector, such as the coupling between two Higgs bosons and two weak vector bosons, as well as the Wilson coefficients of higher-dimensional operators in the Standard Model Effective Field Theory (SM-EFT). Additional information on this project can be found here: [6].

Contact: Juan Rojo

Theory – Constraining the proton structure with Run II LHC data

The non-perturbative dynamics that determine the energy distribution of quarks and gluons inside protons, the so-called parton distribution functions (PDFs), cannot be computed from first principles from Quantum Chromodynamics (QCD), and need to be determined from experimental data. PDFs are an essential ingredient for the scientific program at the Large Hadron Collider (LHC), from Higgs characterisation to searches for New Physics beyond the Standard Model. One recent breakthrough in PDF analysis has been the exploitation of the constraints from LHC data. From direct photons to top quark pair production cross-sections and charmed meson differential distributions, LHC measurements are now a central ingredient of PDF fits, providing important information on poorly-known PDFs such as the large and small-x gluon or the large-x antiquarks. With the upcoming availability of data from the Run II of the LHC, at a center-of-mass energy of 13 TeV, these constraints are expected to become even more stringent.

In this project, the implications of PDF-sensitive measurements at the LHC 13 TeV will be quantified. Processes that will be considered include jet and dijet production at the multi-TeV scale, single-top quark production, and weak boson production in association with heavy quarks, among several others. These studies will be performed using the NNPDF fitting framework, based on artificial neural networks and genetic algorithms. The phenomenological implications of the improved PDF modelling for Higgs and new physics searches at the LHC will also be explored. Additional information on this project can be found here: [7].

Contact: Juan Rojo

2016:

Extreme Astronomy – Preparing for CTA, the Next-Generation Gamma-Ray Observatory

The Cherenkov Telescope Array (CTA) is a planned facility for measuring gamma rays from space covering more than four orders of magnitude in energy, up to energies exceeding 100 TeV. CTA employs the imaging atmospheric Cherenkov technique to measure properties of cosmic gamma rays. This technique is based on measuring Cherenkov light emitted during the development of a gamma-ray air shower. CTA will be built at two experimental sites, one in the Northern, one in the Southern hemisphere, and will consist of up to 100 telescopes. It represents a major leap forward in sensitivity and precision for gamma-ray astronomy, and will allow us to explore very-high-energy processes of the extreme Universe at an unprecedented level.

Several master projects are available in the CTA group of UvA and the students will participate in photonic and electronic R&D studies contributing to the starting phase of CTA. These studies will either focus on laboratory-based measurements or simulations of novel kinds of single-photon detectors, referred to as silicon photomultipliers (SiPMs). By means of these simulations the performance of SiPMs used for arrays of Cherenkov telescopes will be assessed and their optimal operational parameters will be evaluated. Within one of the laboratory-based projects different types of SiPMs will be characterised and a measuring system to calibrate the photosensors will be designed and operated. In a different project various imaging and non-imaging light sources will be used to study the trigger performance of a CTA prototype camera.

Contact: David Berge, Maurice Stephan


ATLAS : Astroparticle Physics at the LHC

Understanding particle acceleration up to very high energies in the Universe requires Earth-bound experimental techniques that exploit the Earth’s atmosphere as detection medium. Only the shear size of the atmosphere provides a sufficiently large sensitive area to measure the very rare highest energy particles from the cosmos as they impinge on the Earth. The idea of the atmospheric measurement is simple: a cosmic particle hitting the atmosphere is being absorbed by developing into an air shower, a spray of secondary particles that originates in the collision of the primary cosmic particle with air molecules, and successive interactions of those secondary particles in the atmosphere. Such air showers can be traced and therefore measured on Earth, providing information about the energy, type, and direction of the primary cosmic particle, by different means. Important examples of such atmospheric detection techniques include the measurement of muons with particle counters at the Earth’s surface and the measurement of Cherenkov or Fluorescence light emitted during the air shower development. The connection between measured quantities like particle numbers or light intensity and original quantities like particle energy or type is in all cases inferred using simulations of particle collisions and cascades in the atmosphere.

The goal of this master project is to exploit data of proton collisions measured with ATLAS, an experiment at the Large Hadron Collider (LHC), the highest energy human particle collider currently operating at CERN in Geneva (Switzerland), to test and improve simulations of particle collisions in the atmosphere up to the highest known energies (a few times 1020 eV). The student will work on ATLAS data analysis and Monte Carlo simulations of particle collisions, both for simulating proton colliding in ATLAS and cosmic-ray protons colliding with air molecules in the atmosphere. The ultimate goal is to improve Monte Carlo model predictions used for experiments like the upcoming CTA (http://www.cta-observatory.org/) and Auger (http://www.auger.org/).

Contact: David Berge, David Salek

ATLAS : Beyond Standard Model with multiple leptons

The Standard Model of particle physics (SM) is extremely successful, but would it hold against of check of with data containing multiple leptons? Although very rare process, the production of leptons is calculated in SM with high precision. On detector side the leptons (electrons and muons) are easy to reconstruct and such a sample contains very little "non-lepton" background. This analysis has a very ambitious goal to test many final states at once, without over-tuning for a specific model. The second step would then be to test obtained results against models of composite structure of leptons or presence of heavy right handed neutrinos favored in seesaw theories. With this project, the student would gain close familiarity with modern experimental techniques (statistical analysis, SM background estimates, etc.), with Monte Carlo generators and the standard HEP analysis tools (ROOT, C++, etc.).

Contact: Olya Igonkina

ATLAS : Search for supersymmetric dark matter-like particles

Supersymmetry is a theory of physics beyond the Standard Model of particle physics that makes a link between fermions and bosons. Apart from many other attractive features, supersymmetry also predicts a particle that may be a candidate for dark matter. Such particles, and their related particles, may be produced at the LHC. Searching for them, however, is challenging. The production cross-sections are small, and the final states are difficult to measure, for example because the final state particles may have little energy, and are ignored by the ATLAS trigger and reconstruction software. In this project we will investigate the measurement of such particles, with the aim to improve the current ATLAS search strategy. You will then apply the improved analysis to the ATLAS data (to be) collected in 2016. In the project you will learn modern experimental analysis techniques, as well as programming in ROOT and C++.

Contact: Paul de Jong

ATLAS inner tracker upgrade

Research description: One of the key sub-systems of the ATLAS experiment at the Large Hadron Collider (LHC) is the Inner Detector (ID), designed to provide excellent charged particles momentum and vertex resolution measurements. At Phase-2 of the LHC run the operating luminosity of the collider will be increased significantly. This will imply an upgrade of all ATLAS subsystems. In particular, the ID will be fully replaced with a tracker completely made of Silicon, having higher granularity and radiation hardness. The R&D process for the new ATLAS ID is now ongoing. Different geometrical layouts are simulated and their performance is studied under different operating conditions in search for the optimal detector architecture. Also, the performance of the new Si-sensors/modules is under investigation with dedicated laboratory tests. The focus of the project could be on the simulation of the High-Luminosity LHC version of the ATLAS Inner Detector. The student will learn how a high-energy physics experiment is designed and optimized. Alternatively, if possible at that moment, the student could work on a project at the Nikhef Silicon laboratory at the test-bench for new ATLAS Si-strip detectors and participate in the quality assurance procedure for the new ATLAS Si detectors.

Contact: Peter Vankov


ATLAS : Model testing for Beyond the Standard Model Higgs

Recently there's been a lot of excitement about hints for new Beyond the Standard Model (BSM) physics. When the search for the Higgs was ongoing we had a model to test possible bumps against, now we are looking for any new particle and there are many models available. Testing the newest results from the LHC is challenging because of low statistics and model uncertainties. In this project we will investigate different BSM Higgs models that could possible explain the newest results of the LHC. For this we will use the data collected in 2015 and the data that will be collected in 2016. In the end we will set limits on the tested models (or discover a new particle). During the project you will learn modern experimental analysis techniques as well as programming.

Contact: Wouter Verkerke, Lydia Brenner

Theory & ATLAS: How to violate lepton flavour?

One of the big outstanding questions in particle physics is what has caused the matter-antimatter asymmetry in the Universe. One of the possible solutions is related to processes that violate lepton flavour. Such phenomena could be observable in the ATLAS experiment at the Large Hadron Collider. In fact, recent data show a hint for the violation of lepton flavour in the decay of the Higgs boson into a mu and tau lepton. However, additional experimental and theoretical investigations are necessary to further probe this very interesting phenomenon. The goal of this project is to identify complementary lepton flavour violating processes and to study correlations between them and other flavour probes. The work will involve theoretical calculations and a classification of the most useful observables for the ATLAS experiment.

Contact: Jordy de Vries, Olya Igonkina, Robert Fleischer

KM3NeT : Reconstruction of first neutrinos in KM3NeT

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its first string with sensitive photodetectors has been deployed end of 2015, in total 30 will be deployed til end of 2017. Already these few strings provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere and to identify neutrino interactions. The performance and calibration of the detector will be evaluated also in comparison with simulations. Procedures to identify and also optimally reconstruct the directions of the muons and neutrinos will be developed to verify the performance and potential of the detector and to pave the path towards the neutrino astronomy. Programming skills are essential, mostly root and C++ will be used.

Contact: Ronald Bruijn

Neutrino mass hierarchy with KM3NeT/ORCA

Neutrinos exist in three flavors and are known to oscillate between flavors whereby the detected flavor depends on the (partly) known oscillation parameters, the mass differences, their energy and travel length. The neutrino telescope KM3NeT is planning for a dedicated set of detection units in order to pursue an oscillation measurement of an unprecedented precision using neutrinos from atmospheric interactions and with this enabling the measurement of the so far still unknown neutrino mass hierarchy. The measurement of this subtle effect requires unprecedented precision in the reconstruction and identification of the flavor, energy and direction. Various projects are available in the reconstruction and evaluation of the mass hierarchy using dedicated simulations. Programming skills are essential, mainly C++ and root will be used.

Contact: Aart Heijboer

All-flavor-neutrino analysis of ANTARES data

The ANTARES neutrino telescope has been taking data continuously since 2007. Most analyses of the data have been performed using the signature of a muon neutrino interaction whereby a long track can be reconstructed in the detector. Recent developments allowed for the first time also the reconstruction of a cascade signature in the detector at high angular resolution so that also electron and tau neutrino interactions can be detected (here these two are not distinguishable from each other). A search for neutrinos from cosmic sources on the first 6 years of data has by now been accomplished using this new reconstruction. In this project this search will be continued and exploited also on 2 more years of data for a dedicated optimized analysis of the Galactic Center to probe the possible neutrino emission from this highly interesting region. Programming skills are essential, mainly C++ and root will be used. Also other options for analyses of the ANTARES data are available.

Contact: Dorothea Samtleben

ALICE: Particle Polarization in Strong Magnetic Fields

When two atomic nuclei, moving in opposite directions, collide off- center then the Quark Gluon Plasma (QGP) created in the overlap zone is expected to rotate. The nucleons not participating in the collision represent electric currents generating an intense magnetic field. The magnetic field could be as large as 10^{18} gauss, orders of magnitude larger than the strongest magnetic fields found in astronomical objects. Proving the existence of the rotation and/or the magnetic field could be done by checking if particles with spin are aligned with the rotation axis or if charged particles have different production rates relative to the direction of the magnetic field. In particular, the longitudinal and transverse polarisation of the Lambda^0 baryon will be studied. This project requires some affinity with computer programming.

Contact: P. Christakoglou

ALICE: Forward Particle Production from the Color Glass Condensate

It has been proposed that a new state of matter (the color-glass condensate, or CGC) may provide a universal description of hadronic collisions (e.g. proton-proton collisions) at very high energy. The CGC may be seen as the classical field limit of Quantum Chromodynamics, and a framework for calculating observables from this state has been developed. Several measurements are consistent with the assumption of a CGC, but no experimental proof exists so far. In this project we intend to perform a systematic study of the sensitivity to the CGC of different possible measurements at the LHC. The work will be performed in close collaboration with an external world expert in this field. It is advantageous to have a good background in theoretical physics. (contact: T. Peitzmann, M. van Leeuwen) Blast-Wave Model in Heavy-Ion collisions The goal of heavy-ion physics is to study the Quark Gluon Plasma (QGP), a hot and dense medium where quarks and gluons move freely over large distances, larger than the typical size of a hadron. Hydrodynamic simulations expect that the QGP will expand under its own pressure, and cool while expanding. These simulations are particularly successful in describing some of the key observables measured experimentally, such as particle spectra and elliptic flow. A reasonable reproduction of the same observables is also achieved with models that use parameterisations that resemble the hydrodynamical evolution of the system assuming a given freeze-out scenario, usually referred to as blast-wave models. The goal of this project is to work on different blast wave parametrisations, test their dependence on the input parameters and extend their applicability by including more observables studied in heavy-ion collisions in the global fit.

Contact: P. Christakoglou

ALICE: Energy Loss of Energetic Quarks and Gluons in the Quark-Gluon Plasma

One of the ways to study the quark-gluon plasma that is formed in high-energy nuclear collisions, is using high-energy partons (quarks or gluons) that are produced early in the collision and interact with the quark-gluon plasma as they propagate through it. There are several current open questions related to this topic, which can be explored in a Master's project. For example, we would like to use a new Monte Carlo generator model (JEWEL) of the collision to see whether we can measure the shape of the collision region using measurements of hadron pairs. In the project you will collaborate with one the PhD students in our group to use the model to generate predictions of measurements and compare those to data analysis results. Depending on your interests, the project can focus more on the modeling aspects or on the analysis of experimental data from the ALICE detector at the LHC.

Contact: M. van Leeuwen

ALICE: Chiral Magnetic Effect and the Strong CP Problem

Within the Standard Model, symmetries, such as the combination of charge conjugation (C) and parity (P), known as CP-symmetry, are considered to be key principles of particle physics. The violation of the CP-invariance can be accommodated within the Standard Model in the weak and the strong interactions, however it has only been confirmed experimentally in the former. Theory predicts that in heavy-ion collisions gluonic fields create domains where the parity symmetry is locally violated. This manifests itself in a charge-dependent asymmetry in the production of particles relative to the reaction plane, which is called Chiral Magnetic Effect (CME). The first experimental results from STAR (RHIC) and ALICE (LHC) are consistent with the expectations from the CME, but background effects have not yet been properly disentangled. In this project you will develop and test new observables of the CME, trying to understand and discriminate the background sources that affects such a measurement.

Contact: P. Christakoglou

ALICE: Quantum Coherence in Particle Production with Intensity Interferometry

Intensity interferometry – also known as HBT-effect or Bose-Einstein-correlations – is a method to study the space-time structure of the particle-emitting source in high-energy physics. The main interest so far has been on the width of correlation functions in momentum space, which reflects the space-time information. The strength of the correlation also carries information, but this has been ignored by many people. The correlation strength is in particular influenced by the degree of coherence of particle production. Recently new studies have been performed to extract this degree of coherence, however, many other effects might distort such a measurement, in particular the production of pions via resonance decay. In this project we will study the role of resonance decays for a measurement of coherence in intensity interferometry and try to establish possible correction methods for any distortions they may cause. We will perform theoretical model calculations with Monte-Carlo simulation methods.

Contact: T. Peitzmann

ALICE: Higher Harmonic Flow

When two ions collide, if the impact parameter is not zero, the overlap region is not isotropic. This spatial anisotropy of the overlap region is transformed into an anisotropy in momentum space through interactions between partons and at a later stage between the produced particles. It was recently realized that the overlap region of the colliding nuclei exhibits an irregular shape. These irregularities originate from the initial density profile of nucleons participating in the collision which is not smooth and is different from one event to the other. The resulting higher order flow harmonics (e.g. v3, v4, and v5, usually referred to as triangular, quadrangular, and pentangular flow, respectively) and in particular their transverse momentum dependence are argued to be more sensitive probes than elliptic flow not only of the initial geometry and its fluctuations but also of shear viscosity over entropy density (η/s). The goal of this project is to study v3, v4, and v5 for identified particles in collisions of heavy-ions at the LHC.

Contact: P. Christakoglou

ALICE: A New Detector for Very High-Energy Photons: FoCal

High-energy photons are important messenger particles in particle physics. In particular direct photons (i.e. directly produced from elementary scattering processes) are interesting, but it is a difficult task to discriminate them from the photons originating from particle decays. Existing detector have limited capabilities for such a discrimination, in particular at the highest energies. Our institute has pioneered a detector based on a new concept, a digital pixel calorimeter with Si-sensors of unprecedented granularity. First proof-of-principle measurements have already been performed. In this project we will study the performance of a particular detector design for measurements of direct photons at the LHC and optimize the design parameters for such a measurement. Performance studies for other measurements – e.g. jets, J/ψ, or ϒ particles – may be carried out in addition.

Contact: T. Peitzmann M. van Leeuwen

ALICE: Thermal Photon Emission: Quark-Gluon Plasma or Hadron Gas?

Recently, measurements of thermal photon emission in high-energy nuclear collisions have been performed at RHIC and at LHC. It is generally believed that a quark-gluon plasma equation of state is the natural description of the hot initial phase of these collisions, and so far only theoretical model calculations including such a phase have been compared to those measurements. In this project we will revisit hadron gas models and try to reproduce the thermal photon yield together with other observables. In this work we will use and possibly modify Monte Carlo implementations of relativistic hydrodynamics, tune it to existing data of hadron production and then estimate the photon production from the same model. The model implementation will be based on previous work of external theoretical colleagues and will be carried out in collaboration with them.

Contact: T. Peitzmann

A New Detector for Proton Therapy and Proton Computed Tomography

Conventional imaging of humans in medical treatment relies mostly on electromagnetic radiation (CT, MRT) or positrons (PET). A recently proposed new imaging strategy, in particular in the context of proton therapy for cancer treatment, is to use proton beams. Current detectors for the scattered protons have severe limitations, in particular for their precision and measurement times. New development of intelligent Si-sensors in particle physics offer possibilities to develop much more efficient detectors for such proton CT measurements. We will perform R&D on the use of new silicon pixel detectors developed in the context of the ALICE experiment at CERN for such medical applications. Studies will include Monte-Carlo simulations of a possible detector setup and measurements with the first samples of the appropriate silicon sensors, which will become available in early 2016. The project will be carried out in the context of a scientific collaboration with Bergen University, Norway.

Contact: T. Peitzmann

Medical X-ray Imaging

With the upcoming of true multi-threshold X-Ray detectors the possibilities for Spectral Imaging with low dose, including spectral CT, is now a reality around the corner. The Medipix3RX chip, from the Medipix Collaboration (CERN) features up to 8 programmable thresholds which can select energy bins without a threshold scan. A number of projects could be derived from the R&D activities with the Medipix3RX within the Nikhef R&D group on X-ray imaging for medical applications:

  • Medipix3RX characterization in all its operation modes and gains.
  • Spectral CT and scarce sampling 3D reconstruction
  • Charge sharing: the charge-sum capabilities of the chip can be exploited to further understand the problem of charge sharing in pixelized detectors. A combination of the characterization of the charge-summing mode plus the use of both planar, and 3D sensors, at the light of MC simulation, could reveal valuable information about charge sharing.

Contact: John Idarraga,Niels van Bakel

Compton camera

In the Nikhef R&D group we develop instrumentation for particle physics but we also investigate how particle physics detectors can be used for different purposes. A succesfull development is the Medipix chip that can be used in Xray imaging. For use in large scale medical applications compton scattering limits however the energy resolving possibilities. You will investigate whether it is in principle possible to design a Xray application that detects the compton scattered elctron and the absorbed photon. Your ideas can be tested in practice in the lab where a Xray scan can be performed.

Contact: Els Koffeman

The Modulation experiment

There exist a few measurements that suggest an annual modulation in the activity of radioactive sources. With a few groups from the XENON collaboration we have developed four sets of table-top experiments to investigate this effect on a few well known radioactive sources. The experiments are under construction in Purdue University (USA), a mountain top in Switzerland, a beach in Rio de Janeiro and the last one at Nikhef in Amsterdam. We urgently need a master student to (1) do the final commissioning of the experiment, (2) collect the 1st big data set, and (3) analyse the first data. We are looking for an all-round physicist with interest in both lab-work and data-analysis. The student will directly collaborate with the other groups in this small collaboration (around 10 people), and the goal is to have the first publication ready by the end of the project.

Contact: Auke Colijn

Acoustic detection of ultra-high energy cosmic-ray neutrinos

The study of the cosmic neutrinos of energies above 10^17 eV, so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent sources, such as gamma ray bursts, supernovae or even dark matter. The energy deposition of cosmic neutrinos in water induces a thermo-acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology that is based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope.

Students have the possibility to participate to this project is the following ways: (i) Modeling of cosmic rays induced acoustic signal in a neutrino telescope. Keywords: Cosmic rays, Monte Carlo, signal processing, telescope optimization. (ii) Testing and optimization of fiber optical hydrophone for a large scale neutrino telescope. Keywords: Experimental, physics, system design.

The work will be (partly) executed in Delft.

Contact: Ernst-Jan Buis

LHCb: A Scintillator Fibers Tracker

The LHCb collaboration is upgrading the present tracking system constructing a new tracker based on scintillating fibers combined with silicon photo-multipliers (SiPM): the SciFi Tracker! Nikhef plays a key role in the project, as we will build the SciFi fibers modules, the cold-box enclosure housing the SiPMs, and a large part of the on-detector electronics. In all these areas, interesting test hardware and software has to be realized, and several research topics for a Master project are available, taking the student in contact with state-of-the-art particle detectors, in a large team of physicists and engineers. Possible collaborations with the Nikhef R&D group can also be envisaged.

Contact: Antonio Pellegrino

LHCb: Discovery of the Decay Lb --> p Ds+

This project aims to measure the branching fraction of the decay Lb->p Ds+ (bud -> uud + ds). The decay Lb->p Ds+ is quite rare, because it occurs through the transition of a b-quark to a u-quark. It has not been measured yet (although some LHCb colleagues claim to have seen it). This decay is interesting, because

1) It is sensitive to the b->u coupling (CKM-element Vub), which determination is heavily debated. 2) It can quantify non-factorisable QCD effects in b-baryon decays.

The decay is closely related to B0->pi-Ds+, which proceeds through a similar Feynman diagram. Also, the final state of B0->pi-Ds+ is almost identical to Lb->p Ds+. The aim is to determine the relative branching fraction of Lb->pDs+ with respect to B0->D+pi- decays, in close collaboration with the PhD (who will study BR(B0->pi-Ds+)/BR(B0->D+pi-) ). This project will result in a journal publication on behalf of the LHCb collaboration, written by you. For this project computer skills are needed. The ROOT programme and C++ and/or Python macros are used. This is a project that is closely related to previous analyses in the group. Weekly video meetings with CERN coordinate the efforts with in the LHCb collaboration. Relevant information:

[1] R.Aaij et al. [LHCb Collaboration], ``Determination of the branching fractions of B0s->DsK and B0->DsK, JHEP 05 (2015) 019 [arXiv:1412.7654 [hep-ex]]. [2] R. Fleischer, N. Serra and N. Tuning, ``Tests of Factorization and SU(3) Relations in B Decays into Heavy-Light Final States, Phys. Rev. D 83, 014017 (2011) [arXiv:1012.2784 [hep-ph]].

Contact: Niels Tuning and Lennaert Bel and Mick Mulder

LHCb: Measurement of B0 -> pi Ds- , the b -> u quark transition

This project aims to measure the branching fraction of the decay B0->pi Ds+. This decay is closely related to Lb->p Ds+ (see above), and close collaboration between the two master projects is foreseen. This research was started by a previous master student. The new measurement will finish the work, and include the new data from 2015 and 2016.

See Mick Mulders master thesis for more information.

Contact: Niels Tuning and Lennaert Bel and Mick Mulder

LHCb: A search for heavy neutrinos in the decay of W bosons at LHCb

Neutrinos are arguably the most mysterious of all known fundamental fermions as they are both much lighter than all others and only weakly interacting. It is thought that the tiny mass of neutrinos can be explained by their mixing with so-far unknown, much heavier, neutrino-like particles. In this research proposal we look for these new neutrinos in the decay of the SM W-boson using data with the LHCb experiment at CERN. The W boson is assumed to decay to a heavy neutrino and a muon. The heavy neutrino subsequently decays to a muon and a pair of quarks. Both like-sign and opposite-sign muon pairs will be studied. The result of the analysis will either be a limit on the production of the new neutrinos or the discovery of something entirely new.

Contact: Wouter Hulsbergen and Elena Dall'Occo


LHCb: Searches for new pentaquarks

In 2015 LHCb surprisingly discovered states containing five quarks, called Pc+ pentaquarks. Such particles question our understanding of confinement, the principle that forces quarks to remain in a single hadron. Which hadrons are allowed and which are not? The pentaquarks were found in the decay of the Lambda_b baryon to a Pc+ and a kaon, and Pc+ to a J/psi and a proton. This project aims at studying other similar but yet unobserved decays which could reveal the presence of the know Pc+, or yet unknown pentaquarks. The student will optimise a selection for finding such a decay in LHCb data using machine learning techniques.

See arXiv:1406.0755 for more information.

Contact: Patrick Koppenburg

2015:

Cool with Carbon Foam

The sensors and readout chips of tracking detectors produce heat which must be removed by a cooling system. The amount of material used for cooling must be minimised to avoid spoiling the track measurement by multiple scattering, bremstrahling, and the like. Recently highly porous carbon foams with low density and high thermal conductivities have become available. In this project we investigate and optimise the performance of gas-cooled low radiation-length carbon-foams for cooling.

So far we have demonstrated the very high heat-transfer-coefficient from readout chip to gas. In a second phase we will make a more realistic detector prototype for study. We can also further optimise the design by machining the foam to direct the gas where it is needed most. With help from Nikhef engineering department we can study the implications for the off-detector part of the system.

Contact: Nigel Hessey

Electrode optimisation for Gaseous Pixel Detectors

The detector R&D Group develops highly accurate gaseous tracking detectors based on pixelised readout chips. In this computer-simulation based project we will use meshing and finite element analysis tools to calculate the electric field of a given detector design. We can then use the Garfield program to simulate the detector performance, and then optimise the design of the electrodes, improving the drift-field, avalanche field, and signal-pickup of future detectors.

In the first year of the project we have developed the tools needed, and are optimising the signal electrode design. With the tools now in place, in the coming year we can optimise many other features of the design.

Contact: Nigel Hessey


The Radon Terminator

For Dark Matter experiments achieving low radioactive backgrounds determines the succes of an experiment. Within the XENON collaboration a lot of expertise is present to control these radioactive backgrounds, but unfortunately some of these are extremely hard to control. One of these is radon: radon is an unstable noble gas with a lifetime of several days, which can be solved into the xenon we use in our experiment. The decays happen in the middle of the active volume of our detector and may form an irreducible background to the Dark Matter sources. Several ideas exist to filter radon from xenon, and at Nikhef we are developing a new technique based on electrostatic separation. In our group we need a master student to commission and validate a radon separator we have built at Nikhef. The student will need to build / buy the diagnostics equipment and then show whether our proposed technique works or not. You will be the 'owner' of your own experimental setup. This is a high-risk project - there is no guarantee yet that the technique works: if it works the pay-off is high!

Contact: Auke Colijn

The Modulation experiment

There exist a few measurements that suggest an annual modulation in the activity of radioactive sources. With a few groups from the XENON collaboration we have developed four sets of table-top experiments to investigate this effect on a few well known radioactive sources. The experiments are under construction in Purdue University (USA), a mountain top in Switzerland, a beach in Rio de Janeiro and the last one at Nikhef in Amsterdam. We urgently need a master student to (1) do the final commissioning of the experiment, (2) collect the 1st big data set, and (3) analyse the first data. We are looking for an all-round physicist with interest in both lab-work and data-analysis. The student will directly collaborate with the other groups in this small collaboration (around 10 people), and the goal is to have the first publication ready by the end of the project.

Contact: Auke Colijn


Testing general relativity with gravitational waves

The Advanced LIGO and Advanced Virgo detectors are gearing up to make the first direct detections of gravitational waves over the next few years, with a first observing run scheduled for September 2015. Among the most promising sources are mergers of binary systems consisting of neutron stars and/or black holes. The ability to observe the emitted gravitational wave signals will, for the first time, give access to the genuinely strong-field dynamics of general relativity (GR), thereby putting the classical theory to the ultimate test. The Nikhef group has developed a data analysis method to look for generic deviations from GR using signals from merging binary neutron stars. We are now extending this framework to binary black holes, which have much richer dynamics and will allow for more penetrating tests of GR, but which also pose significant new challenges. The student will study the end-to-end response of the analysis pipeline to signals predicted by GR as well as a range of alternative theories of gravity, by adding simulated waveforms to real detector noise. Basic programming skills in C, Python, or related languages are a prerequisite.

Contact: Chris Van Den Broeck


New physics from Higgs interactions with polarised W bosons

Higgs interactions with electroweak gauge bosons W+ and W- in the SM are a crucial, precisely defined part of the Standard Model. Measuring separately the Higgs coupling to longitudinally and transversely polarised bosons will determine, for the first time, if Higgs and gauge bosons are elementary, as predicted in the SM, or composite particles, indicating the presence of the BSM physics. The student will be involved in all steps of the analysis: Monte Carlo studies, the analysis of the ATLAS data and background rejection. The basic tools will include programming in C++ and Python and using ROOT.

Contact: Magdalena Slawinska


ATLAS inner tracker upgrade

Research description: One of the key sub-systems of the ATLAS experiment at the Large Hadron Collider (LHC) is the Inner Detector (ID), designed to provide excellent charged particles momentum and vertex resolution measurements.

At Phase-2 of the LHC run the operating luminosity of the collider will be increased significantly. This will imply an upgrade of all ATLAS subsystems. In particular, the ID will be fully replaced with a tracker completely made of Silicon, having higher granularity and radiation hardness. The R&D process for the new ATLAS ID is now ongoing. Different geometrical layouts are simulated and their performance is studied under different operating conditions in search for the optimal detector architecture. Also, the performance of the new Si-sensors/modules is under investigation with dedicated laboratory tests. The focus of the project could be on the simulation of the High-Luminosity LHC version of the ATLAS Inner Detector. The student will learn how a high-energy physics experiment is designed and optimized. Alternatively, if possible at that moment, the student could work on a project at the Nikhef Silicon laboratory at the test-bench for new ATLAS Si-strip detectors and participate in the quality assurance procedure for the new ATLAS Si detectors.

Contact: Peter Vankov


Searching for Dark Matter in the mono-jet channel in ATLAS

Searches for Dark Matter are one of the key points of the LHC physics programme in Run-2. The mono-jet analysis, where an energetic jet recoils against missing transverse energy, is the most sensitive general search channel for Dark Matter candidates in ATLAS. In this project, the student will take part in the data analysis, help with estimating Standard Model backgrounds and prepare an interpretation of the results in terms of simplified models such as, for example, Higgs portal Dark Matter. Basic knowledge of C++ and python is required.

Contact: David Salek

ATLAS Run 2 : Beyond Standard Model with multiple leptons

The Standard Model of particle physics (SM) is extremely successful, but would it hold against of check of with data containing multiple leptons? Although very rare process, the production of leptons is calculated in SM with high precision. On detector side the leptons (electrons and muons) are easy to reconstruct and such a sample contains very little "non-lepton" background. This analysis has a very ambitious goal to test many final states at once, without over-tuning for a specific model. The second step would then be to test obtained results against models of composite structure of leptons or presence of heavy right handed neutrinos favored in seesaw theories. With this project, the student would gain close familiarity with modern experimental techniques (statistical analysis, SM background estimates, etc.), with Monte Carlo generators and the standard HEP analysis tools (ROOT, C++, etc.).

Contact: Olya Igonkina


Higgs Physics: Is the observed Higgs-like particle at 125 GeV composite?

Now that a Higgs-like particle has been observed in several final states it is important to test experimentally whether it is composite. In the Standard Model the Higgs is elementary. The test can be done by looking in the final state where the H (composite) decays to the H (observed at 125 GeV) + a photon.

For the analysis the clean four-lepton final state of the H (observed) will be used: H -> Z Z^* -> 4 l. By combining the four-lepton candidates with a photon a search for a resonant composite particle - or excitation of the H (observed) ground state - can be performed by looking for a peak in the invariant mass spectrum. The full data taken from 2010 to 2012 with about 30 observed signal events will be used for this search. The goals is also to study the discovery reach for RUN2.

Contact: Peter Kluit


Acoustic detection of ultra-high energy cosmic-ray neutrinos

Experiment The study of the cosmic neutrinos of energies above 1017 eV, the so-called ultra-high energy neutrinos, provides a unique view on the universe and may provide insight in the origin of the most violent sources, such as gamma ray bursts, supernovae or even dark matter. The energy deposition of cosmic neutrinos in water induce a thermo-acoustic signal, which can be detected using sensitive hydrophones. The expected neutrino flux is however extremely low and the signal that neutrinos induce is small. TNO is presently developing sensitive hydrophone technology that is based on fiber optics. Optical fibers form a natural way to create a distributed sensing system. Using this technology a large scale neutrino telescope can be built in the deep sea. TNO is aiming for a prototype hydrophone which will form the building block of a future telescope. Students project

Students have the possibility to participate to this project is the following ways: (i) Modeling of cosmic rays induced acoustic signal in a neutrino telescope. Keywords: Cosmic rays, Monte Carlo, signal processing, telescope optimization. (ii) Testing and optimization of fiber optical hydrophone for a large scale neutrino telescope. Keywords: Experimental, physics, system design.

The work will be (partly) executed in Delft.

Further information Info on ultra-high energy neutrinos can be found at: http://arxiv.org/abs/1102.3591 Info on acoustic detection of neutrinos can be found at: http://arxiv.org/abs/1311.7588

Contact: Ernst-Jan Buis


First KM3NeT data

The neutrino telescope KM3NeT is under construction in the Mediterranean Sea aiming to detect cosmic neutrinos. Its very first string with sensitive photodetectors will be deployed in the summer 2015. Already the very first detection unit will provide for the option to reconstruct in the detector the abundant muons stemming from interactions of cosmic rays with the atmosphere. The performance and calibration of the detector will be evaluated also in comparison with simulations. Procedures to identify and also reconstruct a background free sample of muons will be developed to verify the performance and potential of the detector and to pave the path towards the neutrino detection. Programming skills are essential, mostly root and C++ will be used.

Contact: Ronald Bruijn

Tau neutrino identification in the KM3NeT neutrino telescope

In order to uniquely identify neutrinos from cosmic sources a promising strategy is to focus on the tau neutrinos. This flavour is (almost) not expected to be produced in interactions of cosmic rays with the atmosphere so that a selection of tau neutrinos can provide for an almost background free sample of cosmic neutrinos. The signature of a tau neutrino interaction in the KM3NeT neutrino telescope is special as high energetic tau leptons created in the neutrino interaction will travel some length (>10m) in the detector before decaying so that two showers of particles are created (at the interaction and decay vertex) The project will use simulations to investigate possible methods for the identification of the tau signature in the KM3NeT neutrino telescope which is now under construction in the Mediterranean Sea. Programming skills are for this project essential, mainly C++ and root being used.

Contact: Dorothea Samtleben

Neutrino mass hierarchy with KM3NeT/ORCA

Neutrinos exist in three flavours and are known to oscillate between flavours whereby the detected flavour depends on the (partly) known oscillation parameters, the mass differences, their energy and travel length. The neutrino telescope KM3NeT is planning for a dedicated set of detection units in order to pursue an oscillation measurement of an unprecedented precision using neutrinos from atmospheric interactions and with this enabling the measurement of the so far still unknown neutrino mass hierarchy. The measurement of this subtle effect requires unprecedented precision in the reconstruction and identification of the flavour, energy and direction. Various projects are available in the reconstruction and evaluation of the mass hierarchy using dedicated simulations. Programming skills are essential, mainly C++ and root will be used.

Contact: Aart Heijboer


Bs->mumu and Bd->mumu normalization and B mesons hadronization probabilities

The measurement of the Bs-> mu mu and Bd->mu mu decays is one of the flagships of the LHCb experiment, the latest result in combination with CMS has recently been published on Nature. The aim of this project is to study the yields of other decays with a J/Psi in the final state, like B+ -> J/Psi K+ and Bs-> J/Psi Phi, that can be detected triggering on the muons decay products of the J/Psi. These yields are a crucial input to obtain the Bs-> mu mu and Bd->mu mu decays branching fraction as they provide a relative normalization. Moreover, in order to use Bd decays to normalize the Bs-> mu mu yields we need to measure the relative probabilities for a b quark to hadronize into a Bs (f_s) or a Bd (f_d) meson, that can also be obtained from B+ -> J/Psi K+, Bs-> J/Psi Phi and Bd-> J/Psi K* decays. The ratio f_s/f_d is not a constant and is therefore important to measure it as a function of both the energy in the center of mass of the pp collision and the B mesons kinematics. The combination of previous data at 7 and 8 TeV and data at 13 TeV from the LHC 2015 run will provide us important new insight and is a result worth a journal publication in his own right. For this project some programming skills are needed (PYTHON or C++). Some initial knowledge of the ROOT analysis framework is also useful. The student will perform his research in a group consisting of two seniors and two Ph.D. students engaged in the study of very rare decays of the B mesons to di-muon final states and the search for lepton-flavor violating final states (e.g. electron-muon). Relevant information: [1] R.Aaij et al. [LHCb Collaboration], ``Measurement of the fragmentation fraction ratio f_s/f_d and its dependence on B meson kinematics, JHEP 04 (2013) 001 [arXiv:1301.5286 [hep-ph]].

Contact: [mailto: pellegrino@nikhef.nl Antonio Pellegrino] and Maarten van Veghel (PhD)

B meson Production asymmetries

At the LHC, B0 mesons and anti-B0 mesons are not produced in equal quantities (about 0.5% more B0 mesons than anti-B0 mesons). This production asymmetry can be measured with semileptonic decays of the type B0 -> D-(*) mu+ nu (and its charge conjugate decay). The goal of this measurement is to measure the asymmetry as function of the transverse momentum and (pseudo)-rapidity of the B0 (or anti-B0). This requires to unfold of the observed kinematic distributions.

Contact: Jeroen van Tilburg and Jacco de Vries


Quantum decoherence

When two particles are created in an anti-symmetric wave function, the two particles are entangled, even though they may be separated by large distances. If one of the particles is forced into one state (projection), this determines the other state instantaneously. Several theoretical models, motivated by quantum gravity effects, predict the existance of a decoherence parameter. Using decays of phi->K_S K_L, it is possible to measure this decoherence parameter by counting the number of phi decays where both neutral kaons are measured as K_S-> pi+ pi-. If this parameter is measured to be non-zero, it would mean that our current understanding of quantum mechanics is not complete.

Contact: [mailto:jtilburg@nikhef.nl Jeroen van Tilburg


A search for heavy neutrinos in the decay of W at LHCb

Neutrinos are arguably the most mysterious of all known fundamental fermions as they are both much lighter than all others and only weakly interacting. It is thought that the tiny mass of neutrinos can be explained by their mixing with so-far unknown, much heavier, neutrino-like particles. In this research proposal we look for these new neutrinos in the decay of the SM W-boson using data with the LHCb experiment at CERN. The W boson is assumed to decay to a heavy neutrino and a muon. The heavy neutrino subsequently decays to a muon and a pair of quarks. Both like-sign and opposite-sign muon pairs will be studied. The result of the analysis will either be a limit on the production of the new neutrinos or the discovery of something entirely new.

Contact: Wouter Hulsbergen and Elena Dall'Occo


Measurement of BR(B0->pi-Ds+) and BR(Bs->Ds-*pi+)/BR(Bs->Ds-pi+)

This project aims to measure the branching fraction of the decay B0->pi-Ds+. The decay B0->pi-Ds+ is quite rare, because it occurs through the transition of a b-quark to a u-quark. It has been measured at the B-factories only at modest precision (~12%). This decay is interesting, because

  1. It is sensitive to the CKM-element Vub, which determination is heavily debated.
  2. It can be used to determine the ratio r_pi=B0->pi-D+/B0->D-pi+ which in turn is needed for CP violation measurements.
  3. It can quantify non-factorisable QCD effects in certain B-decays.

The experimental challenge is to understand the background from e.g. Bs->Ds*pi decays. The aim is to also determine the relative branching fraction of Bs->Ds*pi relative to Bs->Dspi decays. This can is useful, because

  • It helps in the measurement of B0->pi-Ds+
  • It might quantify the magnitude of the ratio of form factors F(Bs->Ds*)/F(Bs->Ds*)

The aim is that this project results in a journal publication on behalf of the LHCb collaboration. For this project computer skills are needed. The ROOT programme and C++ and/or Python macros are used. This is a project that is closely related to three important analyses in the group:

  • Measurements of fs/fd with hadronic Bs->DsPi decays,
  • Time dependent CP violation analysis of Bs->DsK decays.

Weekly video meetings with CERN coordinate the efforts with in the LHCb collaboration.

Contact: Niels Tuning and Mick Mulder

Compton camera

In the Nikhef R&D group we develop instrumentation for particle physics but we also investigate how particle physics detectors can be used for different purposes. A succesfull development is the Medipix chip that can be used in Xray imaging. For use in large scale medical applications compton scattering limits however the energy resolving possibilities. You will investigate whether it is in principle possible to design a Xray application that detects the compton scattered elctron and the absorbed photon. Your ideas can be tested in practice in the lab where a Xray scan can be performed.

Contact: Els Koffeman

Proton Radiography for Proton Beam Therapy

The construction of a Proton Beam Therapy centre in Groningen has started. The Nikhef R&D group is working with KVI-CART and the UMCG in Groningen to improve the quality of the data on which the treatment plan is based. The idea of Proton Beam Therapy is to stop the protons in the tumour where they will deposit the major part of their energy, thereby destroying the tumour. Currently, only the X-ray Computed Tomography data is used to determine the area that needs to be irradiated with protons to destroy the tumour. However, this data is not ideal to calculate the proton beam stopping power distribution as it is based on X-ray attenuation, which is a completely different physical process compared to the stopping of protons. Therefore, we want to implement Proton Beam Computed Tomography, by shooting fast protons through the patient. To improve the information about where the protons are going to stop in the patient, we use a detector system that can track the individual protons both before and after the patient and at the same time will determine how much energy is dissipated in the patient.

In this project the topics that are under study are the following:

  • Data analysis of data taken in May 2015 at 150 MeV proton energy, which means reconstruction of proton tracks and combine this with the deposited energy to identify the different materials in the irradiated phantom.
  • Improving the current set-up based on the lessons learned in the analysis
  • Perform measurements at different initial proton energies with the same phantom to optimise the phantom reconstruction as the information that can be extracted is energy dependent.

Contact: Jan Visser

Medical X-ray Imaging

With the upcoming of true multi-threshold X-Ray detectors the possibilities for Spectral Imaging with low dose, including spectral CT, is now a reality around the corner. The Medipix3RX chip, from the Medipix Collaboration (CERN) features up to 8 programmable thresholds which can select energy bins without a threshold scan. A number of projects could be derived from the R&D activities with the Medipix3RX within the Nikhef R&D group on X-ray imaging for medical applications:

  • Medipix3RX characterization in all its operation modes and gains.
  • Spectral CT and scarce sampling 3D reconstruction
  • Charge sharing: the charge-sum capabilities of the chip can be exploited to further understand the problem of charge sharing in pixelized detectors. A combination of the characterization of the charge-summing mode plus the use of both planar, and 3D sensors, at the light of MC simulation, could reveal valuable information about charge sharing.

Contact: John Idarraga