Difference between revisions of "Register Network Device"

From CT Wiki
Jump to navigation Jump to search
Line 2: Line 2:
  
 
=== Introduction ===
 
=== Introduction ===
 +
<blockquote>
 
As a Nikhef user you are allowed to register a network device on the Nikhef network. <br>
 
As a Nikhef user you are allowed to register a network device on the Nikhef network. <br>
 
This allows this device to be connected to a wall outlet and have access to the internet. <br>
 
This allows this device to be connected to a wall outlet and have access to the internet. <br>
 
You can register up to 3 network devices as a user. <br>
 
You can register up to 3 network devices as a user. <br>
 
To register a device you need to know the mac adress of the device<br>
 
To register a device you need to know the mac adress of the device<br>
 
+
</blockquote>
 
=== How to register a network device ===
 
=== How to register a network device ===
 +
<blockquote>
 
1. Connect your device to the network and open a browser. You will be redirected to https://netreg.nikhef.nl if it doesnt happen, you can type in the link itself in the browser. <br>
 
1. Connect your device to the network and open a browser. You will be redirected to https://netreg.nikhef.nl if it doesnt happen, you can type in the link itself in the browser. <br>
 
2. Log in through our single sign on page to this service by entering your Nikhef credentials <br>
 
2. Log in through our single sign on page to this service by entering your Nikhef credentials <br>
Line 17: Line 19:
 
</blockquote>
 
</blockquote>
 
4. Press process changes and updates <br>
 
4. Press process changes and updates <br>
<br>
+
</blockquote>
 
'''Be Aware''':
 
'''Be Aware''':
 
# It is important to note that after you have registered the network device in this fashion that the network plug in your wall outlet is disconnected for 10 seconds so that the port in our network switch will switch off. After this period when you plug in a registered network device it should be able to connect to internet.
 
# It is important to note that after you have registered the network device in this fashion that the network plug in your wall outlet is disconnected for 10 seconds so that the port in our network switch will switch off. After this period when you plug in a registered network device it should be able to connect to internet.

Revision as of 12:29, 30 September 2015

Register Network Device

Introduction

As a Nikhef user you are allowed to register a network device on the Nikhef network.
This allows this device to be connected to a wall outlet and have access to the internet.
You can register up to 3 network devices as a user.
To register a device you need to know the mac adress of the device

How to register a network device

1. Connect your device to the network and open a browser. You will be redirected to https://netreg.nikhef.nl if it doesnt happen, you can type in the link itself in the browser.
2. Log in through our single sign on page to this service by entering your Nikhef credentials
3. Enter the following information:

- Enter your Device Name
- Enter the mac adress of your network device
- Enter a description

4. Press process changes and updates

Be Aware:

  1. It is important to note that after you have registered the network device in this fashion that the network plug in your wall outlet is disconnected for 10 seconds so that the port in our network switch will switch off. After this period when you plug in a registered network device it should be able to connect to internet.
  2. Your IP network settings should be on DHCP mode to receive the proper IP information for connection to the internet
  3. Some Nikhef services might not be available or need to be configured specifically for your device to function propperly


How to remove a registered network device

  1. Log in to your registered network device page at https://netreg.nikhef.nl
  2. Select the check box on the left side in the column Del?
  3. Press process changes and updates