Wireless Windows settings

From CT Wiki
Jump to navigation Jump to search

Introduction

This article describes how to setup your wireless connection to the eduroam or the Nikhef wireless network

Adding the Network

  • Click on the left-to-right ascending bars on the bottom right corner of the screen
  • Click Open Network and Sharing Center
  • Select Manage Wireless Networks


Eduroam 01.PNG Eduroam 02.PNG


  • Click Add to add a Wireless Network
  • Click Manually create a network profile

Eduroam 03.PNG Eduroam 04.PNG


  • Enter the field Network Name
  • eduroam for the eduroam wireless network
  • NIKHEF (all capitals) for the Nikhef wireless network
  • Set Security Type to WPA2-Enterprise
  • Set Encryption Type to AES
  • Turn on Check box: Start this connection automatically
  • Click Next

Eduroam 05.PNG

Configuring the Wireless Connection

  • Click Change Connection Settings
  • Turn on Check box: Connect to this network automatically
  • [eduroam network only] Turn on Check box: Connect to a more preferred network if available. (This is to connect to the nikhef network instead if both eduroam and nikhef are available)
  • Click Security Tab

Eduroam 06.PNG Eduroam 07.PNG

  • Set Network authentication method: Microsoft: Protected EAP (PEAP)
  • Turn on Checkbox: Remember my credentials for this connection each time I'm logged on
  • Click Settings
  • Turn on Checkbox: Validate Server Sertificate
  • Turn on Checkbox: Connect to these servers:
  • Enter line: wireless.nikhef.nl
  • In the Selection box: Trusted Root Certification Authorities. Check on: AddTrust External CA root
  • Turn on Checkbox: Do not prompt user to authorize new servers or trusted certification authorities
  • Select Authentication Method: Secured password (EAP-MSCHAPv2)
  • Turn on Checkbox: Enable Fast Reconnect
  • Turn on Checkbox: Enable Identity Privacy and enter: anonymous
  • Click Configure
  • Click OFF: Automatically use my Windows logon name and password (and domain if any). then press OK
  • Press OK again

Eduroam 08.PNG Eduroam 09.PNG Eduroam 10.PNG


  • Click Advanced settings on the security tab
  • Turn on Checkbox: specify authentication and select: User authentication
  • Click save credentials
  • Enter your creditials
  • yourusername@nikhef.nl (important to add: @nikhef.nl!)
  • your password
  • Click Ok to return to the Advanced settings screen
  • Click Ok to return to the Wireless Network Properties screen
  • Click Ok to finish configuring the settings

Eduroam 11.PNG Eduroam 12.PNG

Checking the connection

After a few moments the NIKHEF or eduroam network should connect automatically and it should look like below.

Eduroam 13.PNG